Technology Blogs by Members
Explore a vibrant mix of technical expertise, industry insights, and tech buzz in member blogs covering SAP products, technology, and events. Get in the mix!
cancel
Showing results for 
Search instead for 
Did you mean: 
jeffrey_towell2
Explorer

Contents

  1. Inline Declarations
  2. Table Expressions
  3. Conversion Operator CONV
  4. Value Operator VALUE
  5. FOR operator
  6. Reduction operator REDUCE
  7. Conditional operators COND and SWITCH
  8. CORRESPONDING operator
  9. Strings
  10. Loop at Group By
  11. Classes/Methods
  12. Meshes
  13. Filter
  14. Document Purpose



 

 

 

1. Inline Declarations


 

Before 7.40

With 7.40


Data


DATA text TYPE string.

text = 'ABC'.

DATA(text) = 'ABC'.

Loop at into work area


DATA wa like LINE OF itab.

LOOP AT itab INTO wa.

...

ENDLOOP.

LOOP AT itab INTO DATA(wa).

  ...

ENDLOOP.

Call method


DATA a1 TYPE ...

DATA a2 TYPE ...



oref->meth( 

        IMPORTING p1 = a1

        IMPORTING p2 = a2 ).

oref->meth( 

        IMPORTING p1 = DATA(a1)

        IMPORTING p2 = DATA(a2) ).

Loop at assigning


FIELD-SYMBOLS: <line> type …



LOOP AT itab ASSIGNING <line>.

  ...

ENDLOOP.

LOOP AT itab

   ASSIGNING FIELD-SYMBOL(<line>).

   ...

ENDLOOP.

Read assigning


FIELD-SYMBOLS: <line> type …



READ TABLE itab

           ASSIGNING <line>.

READ TABLE itab

   ASSIGNING FIELD-SYMBOL(<line>).
Select into table
DATA itab TYPE TABLE OF dbtab.



SELECT * FROM dbtab

         INTO TABLE itab

        WHERE fld1 = lv_fld1.

SELECT * FROM dbtab

   INTO TABLE @DATA(itab) 

        WHERE fld1 = @lv_fld1.

Select single into


SELECT SINGLE f1 f2

  FROM dbtab

  INTO (lv_f1, lv_f2)

 WHERE ...



 WRITE: / lv_f1, lv_f2.

SELECT SINGLE f1 AS my_f1,

              f2 AS abc

         FROM dbtab

         INTO DATA(ls_struct)

        WHERE ...



WRITE: / ls_struct-my_f1,

         ls_struct-abc.


 

2. Table Expressions

If a table line is not found, the exception CX_SY_ITAB_LINE_NOT_FOUND is raised. No sy-subrc.


 


Before 7.40


With 7.40


Read Table  index


READ TABLE itab INDEX idx  

     INTO wa.

wa = itab[ idx ].

Read Table  using key


READ TABLE itab INDEX idx

 USING KEY key

      INTO wa.

wa = itab[ KEY key INDEX idx ].

Read Table  with key


READ TABLE itab 

  WITH KEY col1 = …

           col2 = …

      INTO wa.

wa = itab[ col1 = … col2 = … ].

Read Table  with key components


READ TABLE itab

  WITH TABLE KEY key 

  COMPONENTS col1 = …

             col2 = …

        INTO wa.

wa = itab[ KEY key col1 = …

                   col2 = … ].

Does record exist?


READ TABLE itab ... 

     TRANSPORTING NO FIELDS.



IF sy-subrc = 0.    

   ... 

ENDIF.

IF line_exists( itab[ ... ] ).       

   ...

ENDIF.
Get table index
DATA idx type sy-tabix.



READ TABLE ... 

  TRANSPORTING NO FIELDS.

idx = sy-tabix.

DATA(idx) =

       line_index( itab[ ... ] ).


NB: There will be a short dump if you use an inline expression that references a non-existent record.

SAP says you should therefore assign a field symbol and check sy-subrc.

ASSIGN lt_tab[ 1 ] to FIELD-SYMBOL(<ls_tab>).

IF sy-subrc = 0.

...

ENDIF.


 NB: Use itab [ table_line = … ] for untyped tables.

 

3. Conversion Operator CONV

I.  Definition

CONV dtype|#( ... )

dtype = Type you want to convert to (explicit)

#     = compiler must use the context to decide the type to convert to (implicit)

 

II. Example

Method cl_abap_codepage=>convert_to expects a string

Before 7.40
DATA text   TYPE c LENGTH 255.
DATA helper TYPE string.
DATA xstr   TYPE xstring.

helper = text.

xstr = cl_abap_codepage=>convert_to( source = helper ).
With 7.40
DATA text TYPE c LENGTH 255.

DATA(xstr) = cl_abap_codepage=>convert_to( source = CONV string( text ) ).

OR
DATA(xstr) = cl_abap_codepage=>convert_to( source = CONV #( text ) ).


 

4. Value Operator VALUE

I. Definition

     Variables:    VALUE dtype|#( )

     Structures:  VALUE dtype|#( comp1 = a1 comp2 = a2 ... )

     Tables:         VALUE dtype|#( ( ... ) ( ... ) ... ) ...

 

II. Example for structures

TYPES:  BEGIN OF ty_columns1, “Simple structure

           cols1 TYPE i,

           cols2 TYPE i,

        END OF ty_columns1.



TYPES: BEGIN OF ty_columnns2,  “Nested structure

          coln1 TYPE i,

          coln2 TYPE ty_columns1,

       END OF ty_columns2.



DATA: struc_simple TYPE ty_columns1,

      struc_nest   TYPE ty_columns2.



     struct_nest   = VALUE t_struct(coln1 = 1

                                    coln2-cols1 = 1

                                    coln2-cols2 = 2 ).

      OR

struct_nest   = VALUE t_struct(coln1 = 1

                               coln2 = VALUE #( cols1 = 1

                                                cols2 = 2 ) ).

 

 III. Examples for internal tables

Elementary line type:

TYPES t_itab TYPE TABLE OF i WITH EMPTY KEY.

DATA  itab   TYPE t_itab.



itab = VALUE #( ( ) ( 1 ) ( 2 ) ).

Structured line type (RANGES table):

DATA itab TYPE RANGE OF i.



itab = VALUE #( sign = 'I'  option = 'BT' ( low = 1  high = 10 )

                                          ( low = 21 high = 30 )

                                          ( low = 41 high = 50 )

                            option = 'GE' ( low = 61 )  ).

 

5. FOR operator

I. Definition

FOR wa|<fs> IN itab [INDEX INTO idx] [cond]

II. Explanation

This effectively causes a loop at itab. For each loop the row read is assigned to a work area (wa) or field-symbol(<fs>).

This wa or <fs> is local to the expression i.e. if declared in a subrourine the variable wa or <fs> is a local variable of that subroutine. Index like SY-TABIX in loop.

Given: 

TYPES: BEGIN OF ty_ship,

          tknum TYPE tknum,     "Shipment Number

          name  TYPE ernam,     "Name of Person who Created the Object

          city  TYPE ort01,     "Starting city

          route TYPE route,     "Shipment route

END OF ty_ship.

TYPES: ty_ships TYPE SORTED TABLE OF ty_ship WITH UNIQUE KEY tknum.

TYPES: ty_citys TYPE STANDARD TABLE OF ort01 WITH EMPTY KEY.


GT_SHIPS type ty_ships. -> has been populated as follows:

Row TKNUM[C(10)] Name[C(12)] City[C(25)] Route[C(6)]

1001JohnMelbourneR0001
2002GavinSydneyR0003
3003LucyAdelaideR0001
4004ElainePerthR0003

 

III. Example 1

Populate internal table GT_CITYS with the cities from GT_SHIPS.

Before 7.40
DATA: gt_citys TYPE ty_citys,

      gs_ship  TYPE ty_ship,

      gs_city  TYPE ort01.



LOOP AT gt_ships INTO gs_ship.

  gs_city =  gs_ship-city.

  APPEND gs_city TO gt_citys.

ENDLOOP.
With 7.40
DATA(gt_citys) = VALUE ty_citys( FOR ls_ship IN gt_ships ( ls_ship-city ) ).

 

IV. Example 2

Populate internal table GT_CITYS with the cities from GT_SHIPS where the route is R0001.

Before 7.40
DATA: gt_citys TYPE ty_citys,

      gs_ship  TYPE ty_ship,

      gs_city  TYPE ort01.



LOOP AT gt_ships INTO gs_ship WHERE route = 'R0001'.

  gs_city =  gs_ship-city.

  APPEND gs_city TO gt_citys.

ENDLOOP.
With 7.40
DATA(gt_citys) = VALUE ty_citys( FOR ls_ship IN gt_ships

                               WHERE ( route = 'R0001' ) ( ls_ship-city ) ).


Note: ls_ship does not appear to have been declared but it is declared implicitly.

 
V. FOR with THEN and UNTIL|WHILE

FOR i = ... [THEN expr] UNTIL|WHILE log_exp

Populate an internal table as follows:

TYPES:

  BEGIN OF ty_line,

    col1 TYPE i,

    col2 TYPE i,

    col3 TYPE i,

  END OF ty_line,

  ty_tab TYPE STANDARD TABLE OF ty_line WITH EMPTY KEY.

 

Before 7.40
DATA: gt_itab TYPE ty_tab,

      j       TYPE i.

FIELD-SYMBOLS <ls_tab> TYPE ty_line.j= 1.



DO.

  j = j + 10.

  IF j > 40. EXIT. ENDIF.

  APPEND INITIAL LINE TO gt_itab ASSIGNING <ls_tab>.

  <ls_tab>-col1 = j.

  <ls_tab>-col2 = j + 1.

  <ls_tab>-col3 = j + 2.

ENDDO.
With 7.40
DATA(gt_itab) = VALUE ty_tab( FOR j = 11 THEN j + 10 UNTIL j > 40

                            ( col1 = j col2 = j + 1 col3 = j + 2  ) ).


 

6. Reduction operator REDUCE

I. Definition

... REDUCE type(

        INIT result = start_value

           ...

      FOR for_exp1

      FOR for_exp2

      ...

      NEXT ...

      result = iterated_value

... )


II. Note

 While VALUE and NEW expressions can include FOR expressions, REDUCE must include at least one FOR expression. You can use all kinds of FOR expressions in REDUCE:

    • with IN for iterating internal tables
    • with UNTIL or WHILE for conditional iterations

 

III. Example 1

Count lines of table that meet a condition (field F1 contains “XYZ”).

Before 7.40
DATA: lv_lines TYPE i.



LOOP AT gt_itab INTO ls_itab where F1 = ‘XYZ’.

  lv_lines = lv_lines + 1.

ENDLOOP.
With 7.40
DATA(lv_lines) = REDUCE i( INIT x = 0 FOR wa IN gt_itab

                    WHERE( F1 = ‘XYZ’ ) NEXT x = x + 1 ).

 

IV. Example 2

Sum the values 1 to 10 stored in the column of a table defined as follows

DATA gt_itab TYPE STANDARD TABLE OF i WITH EMPTY KEY.

gt_itab = VALUE #( FOR j = 1 WHILE j <= 10 ( j ) ).

 

Before 7.40
DATA: lv_line TYPE i,

      lv_sum  TYPE i.



LOOP AT gt_itab INTO lv_line.

  lv_sum = lv_sum + lv_line.

ENDLOOP.
With 7.40
DATA(lv_sum) = REDUCE i( INIT x = 0 FOR wa IN itab NEXT x = x + wa ).

 

V. Example 3

Using a class reference - works because “write” method returns reference to instance object

 

With 7.40
TYPES outref TYPE REF TO if_demo_output.



DATA(output) = REDUCE outref( INIT out  = cl_demo_output=>new( )

                              text = `Count up:`

                              FOR n = 1 UNTIL n > 11

                              NEXT out = out->write( text )

                              text = |{ n }| ).

output->display( ).

 

 

7. Conditional operators COND and SWITCH

I. Definition

... COND dtype|#( WHEN log_exp1 THEN result1
[ WHEN log_exp2 THEN result2 ]
...
[ ELSE resultn ] ) ...

... SWITCH dtype|#( operand
WHEN const1 THEN result1
[ WHEN const2 THEN result2 ]
...
[ ELSE resultn ] ) ...

 

II. Example for COND

DATA(time) =  

  COND string(

    WHEN sy-timlo < '120000' THEN

      |{ sy-timlo TIME = ISO } AM|

    WHEN sy-timlo > '120000' THEN

      |{ CONV t( sy-timlo - 12 * 3600 )

       TIME = ISO } PM|

    WHEN sy-timlo = '120000' THEN

      |High Noon|

    ELSE

      THROW cx_cant_be( ) ).

 

III. Example for SWITCH

DATA(text) =

NEW class( )->meth(

                     SWITCH #( sy-langu

                              WHEN 'D' THEN `DE`

                              WHEN 'E' THEN `EN`

                              ELSE THROW cx_langu_not_supported( ) ) ).


 

8. Corresponding Operator

I. Definition

... CORRESPONDING type( [BASE ( base )] struct|itab [mapping|except] )

 

II. Example Code

With 7.40
TYPES: BEGIN OF line1, col1 TYPE i, col2 TYPE i, END OF line1.
TYPES: BEGIN OF line2, col1 TYPE i, col2 TYPE i, col3 TYPE i, END OF line2.
DATA(ls_line1) = VALUE line1( col1 = 1 col2 = 2 ).

WRITE: / 'ls_line1 =' ,15 ls_line1-col1, ls_line1-col2.

DATA(ls_line2) = VALUE line2( col1 = 4 col2 = 5 col3 = 6 ).

WRITE: / 'ls_line2 =' ,15 ls_line2-col1, ls_line2-col2, ls_line2-col3.

SKIP 2.



ls_line2 = CORRESPONDING #( ls_line1 ).

WRITE: / 'ls_line2 = CORRESPONDING #( ls_line1 )'

     ,70 'Result is ls_line2 = '     

     ,ls_line2-col1, ls_line2-col2, ls_line2-col3.

SKIP.



ls_line2 = VALUE line2( col1 = 4 col2 = 5 col3 = 6 ).   "Restore ls_line2

ls_line2 = CORRESPONDING #( BASE ( ls_line2 ) ls_line1 ).

WRITE: / 'ls_line2 = CORRESPONDING #( BASE ( ls_line2 ) ls_line1 )'

        , 70 'Result is ls_line2 = ', ls_line2-col1

        , ls_line2-col2, ls_line2-col3.

SKIP.



ls_line2 = VALUE line2( col1 = 4 col2 = 5 col3 = 6 ).   "Restore ls_line2

DATA(ls_line3) = CORRESPONDING line2( BASE ( ls_line2 ) ls_line1 ).

WRITE: / 'DATA(ls_line3) = CORRESPONDING line2( BASE ( ls_line2 ) ls_line1 )'

         , 70 'Result is ls_line3 = ' , ls_line3-col1

         , ls_line3-col2, ls_line3-col3.

III. Output

IV. Explanation

Given structures ls_line1 & ls_line2 defined and populated as above.  

 Before 7.40With 7.40
1
CLEAR ls_line2.

MOVE-CORRESPONDING ls_line1 

                TO ls_line2.

ls_line2 = CORRESPONDING #( ls_line1 ).
2
MOVE-CORRESPONDING ls_line1 

                TO ls_line2.

ls_line2 = CORRESPONDING #

        ( BASE ( ls_line2 ) ls_line1 ).
3
DATA: ls_line3 like ls_line2.



ls_line3 = ls_line2.

MOVE-CORRESPONDING ls_line1 

                TO ls_line2.

DATA(ls_line3) = CORRESPONDING line2

        ( BASE ( ls_line2 ) ls_line1 ).

1.  The contents of ls_line1 are moved to ls_line2 where there is a matching column name. Where there is no        match the column of ls_line2 is initialised.

 2. This uses the existing contents of ls_line2 as a base and overwrites the matching columns from ls_line1.
            This is exactly like MOVE-CORRESPONDING.

 3. This creates a third and new structure (ls_line3) which is based on ls_line2 but overwritten by matching
       columns of ls_line1.

 

V. Additions MAPPING and EXCEPT

MAPPING allows you to map fields with non-identically named components to qualify for the data transfer.

   ... MAPPING  t1 = s1 t2 = s2

 EXCEPT allows you to list fields that must be excluded from the data transfer

   ... EXCEPT  {t1 t2 ...}


 

9. Strings

I. String Templates

A string template is enclosed by two characters "|" and creates a character string.

Literal text consists of all characters that are not in braces {}. The braces can contain:

    • data objects,
    • calculation expressions,
    • constructor expressions,
    • table expressions,
    • predefined functions, or
    • functional methods and method chainings

 

Before 7.40
DATA itab TYPE TABLE OF scarr.

SELECT * FROM scarr INTO TABLE itab.



DATA wa LIKE LINE OF itab.

READ TABLE itab WITH KEY carrid = 'LH' INTO wa.



DATA output TYPE string.

CONCATENATE 'Carrier:' wa-carrname INTO output SEPARATED BY space.



cl_demo_output=>display( output ).
With 7.40
SELECT * FROM scarr INTO TABLE @DATA(lt_scarr).

cl_demo_output=>display( |Carrier: { lt_scarr[ carrid = 'LH' ]-carrname }|  ).

 

II. Concatenation

Before 7.40
DATA lv_output TYPE string.

CONCATENATE 'Hello' 'world' INTO lv_output SEPARATED BY space.
With 7.40
DATA(lv_out) = |Hello| & | | & |world|.

 

III. Width/Alignment/Padding

WRITE / |{ 'Left'     WIDTH = 20 ALIGN = LEFT   PAD = '0' }|.

WRITE / |{ 'Centre'   WIDTH = 20 ALIGN = CENTER PAD = '0' }|.

WRITE / |{ 'Right'    WIDTH = 20 ALIGN = RIGHT  PAD = '0' }|.

 

IV. Case

WRITE / |{ 'Text' CASE = (cl_abap_format=>c_raw) }|.

WRITE / |{ 'Text' CASE = (cl_abap_format=>c_upper) }|.

WRITE / |{ 'Text' CASE = (cl_abap_format=>c_lower) }|.

 

V. ALPHA conversion

DATA(lv_vbeln) = '0000012345'.

WRITE / |{ lv_vbeln  ALPHA = OUT }|.  “or ALPHA = IN to go in other direction

 

VI. Date conversion

WRITE / |{ pa_date DATE = ISO }|.           “Date Format YYYY-MM-DD

WRITE / |{ pa_date DATE = User }|.          “As per user settings

WRITE / |{ pa_date DATE = Environment }|.   “As per Environment

 

10. Loop at Group By
I. Definition

LOOP AT itab result [cond] GROUP BY key ( key1 = dobj1 key2 = dobj2 ...
      [gs = GROUP SIZE] [gi = GROUP INDEX] )
      [ASCENDING|DESCENDING [AS TEXT]]
      [WITHOUT MEMBERS]
      [{INTO group}|{ASSIGNING <group>}]
      ...
     [LOOP AT GROUP group|<group>
    ...
    ENDLOOP.]
...

ENDLOOP.

II. Explanation

The outer loop will do one iteration per key. So if 3 records match the key there will only be one iteration for these 3 records. The structure “group” (or “<group>” ) is unusual in that it can be looped over using the “LOOP AT GROUP” statement. This will loop over the 3 records (members) of the group. The structure “group” also contains the current key as well as the size of the group and index of the group ( if GROUP SIZE and GROUP INDEX have been assigned a field name). This is best understood by an example.


III. Example

With 7.40
TYPES: BEGIN OF ty_employee,

         name TYPE char30,

         role TYPE char30,

         age  TYPE i,

END OF ty_employee,



ty_employee_t TYPE STANDARD TABLE OF ty_employee WITH KEY name.



DATA(gt_employee) = VALUE ty_employee_t(

( name = 'John'     role = 'ABAP guru'       age = 34 )

( name = 'Alice'     role = 'FI Consultant'   age = 42 )

( name = 'Barry'    role = 'ABAP guru'       age = 54 )

( name = 'Mary'     role = 'FI Consultant'   age = 37 )

( name = 'Arthur'   role = 'ABAP guru'       age = 34 )

( name = 'Mandy'  role = 'SD Consultant'  age = 64 ) ).



DATA: gv_tot_age TYPE i,

      gv_avg_age TYPE decfloat34.



"Loop with grouping on Role

LOOP AT gt_employee INTO DATA(ls_employee)

  GROUP BY ( role  = ls_employee-role

             size  = GROUP SIZE

             index = GROUP INDEX )

  ASCENDING

  ASSIGNING FIELD-SYMBOL(<group>).



  CLEAR: gv_tot_age.



  "Output info at group level

  WRITE: / |Group: { <group>-index }    Role: { <group>-role WIDTH = 15 }|

              & |     Number in this role: { <group>-size }|.



   "Loop at members of the group

   LOOP AT GROUP <group> ASSIGNING FIELD-SYMBOL(<ls_member>).

      gv_tot_age = gv_tot_age + <ls_member>-age.

      WRITE: /13 <ls_member>-name.

   ENDLOOP.



   "Average age

   gv_avg_age = gv_tot_age / <group>-size.

   WRITE: / |Average age: { gv_avg_age }|.



   SKIP.



ENDLOOP.


IV. Output

Group: 1    Role: ABAP guru           Number in this role: 3

                 John

                 Barry

                 Arthur

Average age: 40.66666666666666666666666666666667

 

Group: 2    Role: FI Consultant       Number in this role: 2

                  Alice

                  Mary

Average age: 39.5

Group: 3    Role: SD Consultant       Number in this role: 1

                  Mandy

Average age: 64

 

11. Classes/Methods

I. Referencing fields within returned structures

 

Before 7.40
DATA: ls_lfa1  TYPE lfa1,

      lv_name1 TYPE lfa1-name1.



      ls_lfa1= My_Class=>get_lfa1( ).

      lv_name1 = ls_lfa1-name1.
With 7.40
DATA(lv_name1) = My_Class=>get_lfa1( )-name1.

 

II. Methods that return a type BOOLEAN

Before 7.40
IF My_Class=>return_boolean( ) = abap_true.

…

ENDIF.

With 7.40
IF My_Class=>return_boolean( ).

…

ENDIF.

NB: The type “BOOLEAN” is not a true Boolean but a char1 with allowed values X,- and <blank>.

       Using type “FLAG” or “WDY_BOOLEAN” works just as well.


 

III. NEW operator

This operator can be used to instantiate an object.

Before 7.40
DATA: lo_delivs TYPE REF TO zcl_sd_delivs,

      lo_deliv  TYPE REF TO zcl_sd_deliv.



CREATE OBJECT lo_delivs.

CREATE OBJECT lo_deliv.



lo_deliv = lo_delivs->get_deliv( lv_vbeln ).
With 7.40
DATA(lo_deliv) = new zcl_sd_delivs( )->get_deliv( lv_vbeln ).

 

 

 

12. Meshes

Allows an association to be set up between related data groups.

I. Problem

Given the following 2 internal tables:

TYPES: BEGIN OF t_manager,

  name   TYPE char10,

  salary TYPE int4,

END OF t_manager,

tt_manager TYPE SORTED TABLE OF t_manager WITH UNIQUE KEY name.



TYPES: BEGIN OF t_developer,

  name    TYPE char10,

  salary  TYPE int4,

  manager TYPE char10,   "Name of manager

END OF t_developer,

tt_developer TYPE SORTED TABLE OF t_developer WITH UNIQUE KEY name.



Populated as follows:

RowName[C(10)]Salary[I(4)]
1Jason3000
2Thomas3200

 

RowName[C(10)]Salary[I(4)]Manager[C(10)]
1Bob2100Jason
2David2000Thomas
3Jack1000Thomas
4Jerry1000Jason
5John2100Thomas
6Tom2000Jason


II. SolutionGet the details of Jerry’s manager and all developers managed by Thomas.

With 7.40
TYPES: BEGIN OF MESH m_team,

         managers   TYPE tt_manager  ASSOCIATION my_employee TO developers

                      ON manager = name,

         developers TYPE tt_developer ASSOCIATION my_manager TO managers  

                      ON name = manager,

       END OF MESH m_team.



DATA: ls_team TYPE m_team.

ls_team-managers   = lt_manager.

ls_team-developers = lt_developer.



*Get details of Jerry's manager *



"get line of dev table

ASSIGN lt_developer[ name = 'Jerry' ] TO FIELD-SYMBOL(<ls_jerry>).

DATA(ls_jmanager) =  ls_team-developers\my_manager[ <ls_jerry> ].



WRITE: / |Jerry's manager: { ls_jmanager-name }|,30

         |Salary: { ls_jmanager-salary }|.



"Get Thomas' developers

SKIP.

WRITE: / |Thomas' developers:|.



"line of manager table

ASSIGN lt_manager[ name = 'Thomas' ] TO FIELD-SYMBOL(<ls_thomas>).

LOOP AT ls_team-managers\my_employee[ <ls_thomas> ]     

        ASSIGNING FIELD-SYMBOL(<ls_emp>).

  WRITE: / |Employee name: { <ls_emp>-name }|.

ENDLOOP.

 

III. Output

Jerry's manager: Jason          Salary: 3000

Thomas' developers:

Employee name: David

Employee name: Jack

Employee name: John


 

13. Filter


Filter the records in a table based on records in another table.

I. Definition


... FILTER type( itab [EXCEPT] [IN ftab] [USING KEY keyname]
WHERE c1 op f1 [AND c2 op f2 [...]] )

II. Problem


Filter an internal table of Flight Schedules (SPFLI) to only those flights based on a filter table that contains the fields Cityfrom and CityTo.

III. Solution

With 7.40
TYPES: BEGIN OF ty_filter,

         cityfrom TYPE spfli-cityfrom,

         cityto   TYPE spfli-cityto,

         f3       TYPE i,

       END OF ty_filter,

       ty_filter_tab TYPE HASHED TABLE OF ty_filter

                     WITH UNIQUE KEY cityfrom cityto.

DATA: lt_splfi TYPE STANDARD TABLE OF spfli.



SELECT * FROM spfli APPENDING TABLE lt_splfi.



DATA(lt_filter) = VALUE ty_filter_tab( f3 = 2

                          ( cityfrom = 'NEW YORK'  cityto  = 'SAN FRANCISCO' )

                          ( cityfrom = 'FRANKFURT' cityto  = 'NEW YORK' )  ).



DATA(lt_myrecs) = FILTER #( lt_splfi IN lt_filter

                                  WHERE cityfrom = cityfrom 

                                    AND cityto = cityto ).



“Output filtered records

LOOP AT lt_myrecs ASSIGNING FIELD-SYMBOL(<ls_rec>).

  WRITE: / <ls_rec>-carrid,8 <ls_rec>-cityfrom,30

           <ls_rec>-cityto,45 <ls_rec>-deptime.

ENDLOOP.


Note: using the keyword “EXCEPT” (see definition above) would have returned the exact opposite records i.e all records EXCEPT for those those returned above.

 

14. Document Purpose

So you're an experienced ABAP programmer wanting to leverage off the fantastic new functionality available to you in ABAP 7.40!

However, searching for information on this topic leads you to fragmented pages or blogs that refer to only a couple of the new features available to you.

What you need is a quick reference guide which gives you the essentials you need and shows you how the code you are familiar with can be improved with ABAP 7.40.

The below document contains exactly this!

It gives examples of "classic" ABAP and its 740 equivalent. It goes into more details on the more difficult topics normally via examples. This allows the reader to dive in to the level they desire. While this document does not contain everything pertaining to ABAP 740 it certainly covers the most useful parts in the experience of the author.

The document has been compiled by drawing on existing material available online as well as trial and error by the author. In particular the blogs by Horst Keller have been useful and are the best reference I have found (prior to this document ). He has a landing page of sorts for his various blogs on the topic here:

ABAP Language News for Release 7.40

Credit also goes to Naimesh Patel for his useful explanations and examples on ABAP 7.40. Here is his example of the "FOR iteration expression" which I leaned on (links to his other 740 articles can be found at the bottom of the link):

http://zevolving.com/2015/05/abap-740-for-iteration-expression/

I compiled the below document to make the transition to using ABAP 740 easier for myself and my project team. It has worked well for us and I hope it will do the same for you.

72 Comments
Labels in this area