on 01-28-2012 4:36 PM
Hi Expert,
I am having NW7 in 2008 server with Maxdb7.8, now dispatcher going stop after some time in sapmmc it is showing
message --running message server connection ok, dialog queue time:0.00sec
and
please find dev_disp trace file detail
-
trc file: "dev_disp", trc level: 1, release: "720"
-
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 70
intno 20020600
make multithreaded, Unicode, optimized
profile
naresh\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_naresh
pid 2572
Sat Jan 28 21:59:13 2012
kernel runs with dp version 129000(ext=118000) (@(#) DPLIB-INT-VERSION-129000-UC)
length of sys_adm_ext is 588 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2572) [dpxxdisp.c 1268]
shared lib "dw_xml.dll" version 70 successfully loaded
shared lib "dw_xtc.dll" version 70 successfully loaded
shared lib "dw_stl.dll" version 70 successfully loaded
shared lib "dw_gui.dll" version 70 successfully loaded
shared lib "dw_mdm.dll" version 70 successfully loaded
shared lib "dw_rndrt.dll" version 70 successfully loaded
shared lib "dw_abp.dll" version 70 successfully loaded
shared lib "dw_sym.dll" version 70 successfully loaded
shared lib "dw_aci.dll" version 70 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Sat Jan 28 21:59:18 2012
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >naresh_NSP_00 <
DpShMCreate: sizeof(wp_adm) 20000 (2000)
DpShMCreate: sizeof(tm_adm) 4323912 (21512)
DpShMCreate: sizeof(wp_ca_adm) 32000 (64)
DpShMCreate: sizeof(appc_ca_adm) 32000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/556056/556064
DpShMCreate: sizeof(comm_adm) 556064 (1104)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (1792)
DpShMCreate: sizeof(wall_adm) (40056/34360/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3920
DpShMCreate: SHM_DP_ADM_KEY (addr: 08A00040, size: 5055296)
DpShMCreate: allocated sys_adm at 08A00048
DpShMCreate: allocated wp_adm_list at 08A02F28
DpShMCreate: allocated wp_adm at 08A03020
DpShMCreate: allocated tm_adm_list at 08A07E48
DpShMCreate: allocated tm_adm at 08A07E70
DpShMCreate: allocated wp_ca_adm at 08E278C0
DpShMCreate: allocated appc_ca_adm at 08E2F5C8
DpShMCreate: allocated comm_adm at 08E372D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 08EBEEF8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 08EBEF50
DpShMCreate: allocated j2ee_adm at 08EBEF88
DpShMCreate: allocated ca_info at 08EBFEE0
DpShMCreate: allocated wall_adm at 08EBFEF8
DpCommAttachTable: attached comm table (header=08E372D0/ft=08E372D8)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 1023 blocks reserved for free list.
ES initialized.
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=159 reserved=47 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c 1654]
***LOG Q0K=> DpMsAttach, mscon ( naresh) [dpxxdisp.c 12221]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >naresh_NSP_00 <)
DpStartStopMsg: start msg sent
Sat Jan 28 21:59:19 2012
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 400 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 250 (50 %)
Sat Jan 28 22:00:18 2012
DpModState: change server state from STARTING to ACTIVE
Thanks
Naresh KK
please suggest.....
HI,
Please see if you have correct values maintained for dispatcher and message server ports and also check if any other service on the host is using the dispatcher port (32<nn>).
Restart the server host if possible, to resolve port conflict issue.
Regards,
Ashutosh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
93 | |
10 | |
10 | |
9 | |
9 | |
7 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.