on 10-17-2012 9:55 AM
Dear Experts,
I have created below wage types.
Wage Type Code | Wage Type Text | Model Wage type | Infotype | |
1100 | Statutory Bonus | M200 | 0008 | Taxable |
8000 | Leave Encashment | MLE0 | 0014 | Taxable |
8001 | Performance Incentive | M200 | 0014 | Taxable |
8002 | Hardship Allowance | M200 | 0014 | Taxable |
8003 | Shift Allowance | M200 | 0014 | Taxable |
8004 | Vehicle Maintenance | M200 | 0014 | Taxable Prerequisite |
8005 | Retention Bonus | M200 | 0014 | Taxable |
8006 | Joining Bonus | M200 | 0014 | Taxable |
8007 | Referral Bonus | M200 | 0015 | Taxable |
8008 | Expense Reimbursement | M200 | 0015 | Non Taxable |
8009 | Non - Taxable Income | M400 | 0015 | Non Taxable |
8010 | Taxable other Income | M200 | 0015 | Taxable |
Please guide me how to assign Processing , Cumulations & Evaluation Classess for these wage type.
I know the table is V_512W_D. However I am not aware of how to assign this properly.
Urgent assistance needed.
Regards,
DRC.
HI Dipti
In Addition to what Akhilesh Said .
if you copy the Standard Wage type all the Setting will be done Automatically now the Question is how you are going to use the Setting according to you Company Requirement
you have to Write the Rule ,Schema and Change the Processing , Cumulations & Evaluation Classes for these wage.
Ex: Unauthorized Absence Processing 10 need to be changed
Taxable and Non taxable Wage types Cumulation Class 24 ,25 need some Action.
Follow the link
http://scn.sap.com/thread/675323
Thx...
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Dear Khose,
I have created one Wage type for Statutory Bonus. Also I am mentioning the characteristics of the wage type below. Please guide me whether the Processing class, Cumulation Class & Evaluation class is correct or not.
Wage Type : 1100 : Statutory Bonus.: This is a monthly wage component.
Eligibility : People who are having salary of 10,000 or less than
10,000, they will get an amount of 700 each month in their pay.
Even though they will have some leave of absence in that particular month.
For this wage component , i have maintained the following Processing classes, Cumulations & Evaluation classes.
Processing Class :
1 | Assignment to valuation bases | 3 | Wage type included in valuation |
3 | Cumulation and storage of time | 0 | Pass on unchanged |
4 | Summarize WT acc.to TX and SI p | 6 | Transfer without modification |
5 | Create net remuneration and tot | 0 | Store in RT without split indic |
6 | Enter wage type from old payrol | 0 | Wagetpe will not be transfered |
10 | Mark wage types for monthly fac | 1 | Reduction with factor /801 |
20 | Cumulation and storage at endgross part | 8 | Route as is and cumulate |
30 | Cumulation update | T | Cumulation performed according |
31 | Allocate monthly lump sums to c | 0 | WT does not lead to cost center |
72 | Nominal cumulations | 4 | Prorate, cum. into ESI/PTX basi |
Cumulation Class :
1 | 1. Totoal Gross Amount | √ |
12 | 12. ESI Basis | √ |
18 | 18. PTax Basis | √ |
24 | 24. Monthly Regular Income | √ |
38 | 38 Form 217 2(A) Basis | √ |
40 | 40 LWF Basis | √ |
Evaluation Classes
2 | Wage type assignment for form p | Blank | Print on form without specific |
6 | Gross Salary | 9 | Uniform Allowance |
10 | BS-Wage type allocation for Bon | 1 | Salary to be considered for Bon |
11 | Form 217 2(A) Basis | 1 | Non perk amounts |
12 | Employee State Insurance | 1 | Contributing towards ESI |
Please guide me whether everything is fine or not.
Regards,
DRC
Hi Dipti
If you Copied the Standard Wage type then you don't need to change any setting unless if Company want to have Some Effects then you can Change Accordingly .
Aim sure you are having the Development server where you are working .
Create a Infotype 8 add Wage types then Try do the Payroll Simulation Run
check the Effects .
Check step by Step you will be Fine
Dont Panic ok
Thx...
Hii
Depti
Why you want to assign Processing , Cumulations & Evaluation Classes for all these wage type ?
See when you copy from STD wage type , all these class will take place automatically according to maintained in STD wage type , if you want to use some different processing or any other class for any particular wage type then goto Table V_512W_D .click on custom like wage type (8000) which you want to change , and put in display mode
this option you will find in Application toll bar then you can change according to your requirement
hope it will work
Regards
Akhilesh
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
99 | |
9 | |
9 | |
5 | |
4 | |
3 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.