on 03-12-2013 7:59 AM
Hello,
After installing a SolMan 7.1 SR1, I have applied the SPS 8 with SPAM.
Spam was looping in error during DDIC Activation phase.
The error in /usr/sap/trans/tmp was:
...
1 EDO534 Object "LANG" "TABL" "SISES_DSA_GSS_ERRORS" was already activated
2WEDO644X"17:23:59" <- task "00018" receiving error ["beryl2_SSM_00"] "(3 Sek)"
2WEDO644 "17:24:00" <- task "00017" receiving error ["beryl2_SSM_00"] "(6 Sek)"
2WEDO644 "17:24:07" <- task "00018" receiving error ["beryl2_SSM_00"] "(2 Sek)"
2WEDO644 "17:24:11" <- task "00017" receiving error ["beryl2_SSM_00"] "(6 Sek)"
1 EDO534 Object "LANG" "DTEL" "ACE_D_RFC_ERROR" was already activated
...
The corresponding work process error was:
...
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A RFC rfc/signon_error_log = -1
A RFC rfc/cp_convert/ignore_error = 1
B dbrsql ERROR (read_handling): RS_READFUPD with too few key fields!
A *** ERROR => RFC ======> Whole number overflow on addition
A *** ERROR => RFC ======> Whole number overflow on addition
A *** ERROR => RFC ======> Whole number overflow on addition
A *** ERROR => RFC ======> Whole number overflow on addition
A Error Code COMPUTE_INT_PLUS_OVERFLOW.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A RFC rfc/signon_error_log = -1
A RFC rfc/cp_convert/ignore_error = 1
B dbrsql ERROR (read_handling): RS_READFUPD with too few key fields!
M ThIErrHandle: entering ThSetStatError
...
What is the root cause of this problem?
Thanks in advance for your answers.
Hello
Check whether the system is throwing the dumps COMPUTE_INT_PLUS_OVERFLOW
If yes you are hitting the issue mentioned in this SAP Note:
Note 1678047 - COMPUTE_INT_PLUS_OVERFLOW during activation
Call Tx SE38 - SDB1FHDB
Select Source Code and Display
Switch to edit mode and replace:
limit-secindcnt = 2147483647.
with
limit-secindcnt = 1023.
You will need an object key to do this.
Good Luck
Cheers
RB
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
I had the same issue while upgrading ABAP stack from SP04 to SP08 for solution manager 7.1 system.
I modified the program as suggested in the note and now we are stuck in the phase IMPORT_PROPER since it says that the object cannot be replaced for the same program.
R3TRPROGSDB1FHDB original object cannot be replaced
Did you also face the same issue?
Please suggest as what can I do from here?
Thanks and Regards,
Karan Shah
Hello Karan,
Karan Shah wrote:
Hi,
We resolved this as the Source System was unfortunately maintained as <SID> instead of SAP when this was modified.
Thanks and Regards,
Karan Shah
I had to reinstall. Therefore I implemented the Note before applying the SPS.
I did not fully understand what you have explained.
Could you please provide more details on what you have performed?
Thanks in advance for your answers.
Hi,
Apologies for not being clear. We implemented the Note 1678047 - COMPUTE_INT_PLUS_OVERFLOW during activation
While doing this manually through SE38, the developer maintained the new version of the program with source system modified as <SID> instead of 'SAP'.
Since the program was standard and it is a SAP object we had to maintain source system as 'SAP'. This can be done through SE03.
After we moved ahead of the DDIC_ACTIVATION Phase, we received an error that Program cannot be replace in IMPORT_PROPER phase.
This was resolved by modifying the source system to 'SAP'. Patch was then able to overwrite the program and we could move ahead.
Thanks and Regards,
Karan Shah
Thank you! I had the same problem - your solution worked for me. I even changed the report during runtime and the system stopped looping. THX!
For everyone else searching for this error I want to drop a few searchtags:
SAPK-200AGINCTSPLUG CTS_PLUG 200 "Whole number overflow on addition" DD_MASS_ACT_PARALLEL AGINCTSPLUG SAPA-200AGINCTSPLUG SPS8 "Solution Manager"
Hi Peter,
Thank you for the fast reaction. We installed ERP 6.0 EHP7 on Linux with Sybase 15.7 DB. Yestarday we wanted to patch the newest components and now we are unable to log-in to the system. As we checked the log files dev_wx we found the bellow error messages. And when we try to log-in to the system with SAPGui we get rabax during sapgui logon. The system is up and running. R3trans -d is also 0000
A ABAP Program SAPMHTTP .
A Source SAPMHTTP Line 12.
A Error Code SYNTAX_ERROR.
A Module $Id: //bas/741_REL/src/krn/abap/runt/abgen.c#5 $ SAP.
A Function ab_genprog Line 1858.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_APC_ERROR entered.
A ** RABAX: level LEV_RX_APC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
Kind Regards
Andrei
Try to update your sapgui and / or start the sapgui in safe-mode.
I'm not sure, if I needed it in this case - but perhaps this helps: 396802 - Error in data stream, CNTL error at logon
--> In the SAPLOGON -> Options -> Additional command line arguments, enter "/SUPPORTBIT_ON=EMERGENCY_REPAIR"
HI RB
It worked. Thanks for your input in this thread.
Thanks
Khalid
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Maintain the control tables of the Transport Organizer (for example, configure the transport routes)
BR,
Prabhakar
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Check if Note 1678047 - COMPUTE_INT_PLUS_OVERFLOW during activation is applicable to your issue.
regards,
Roman
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello Roman,
Roman N wrote:
Check if Note 1678047 - COMPUTE_INT_PLUS_OVERFLOW during activation is applicable to your issue.
regards,
Roman
How should I have proceed with this Note.
While SPAM was looping, how should I have stooped it?
Could I have imported this Note has SPAM was interrupted?
Thanks in advance for your answers.
Hi Schmid,
Can you please paste content the dump , which you are getting in ST22.
With Regards
Ashutosh Chaturvedi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
Did you try to update the kernel to latest level before start of the upgrade?
If not, please try to update the kernel and try to restart the upgrade of SPAM and see whether it resolves .
Thanks and Regards,
Vimal
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
87 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.