SAP MMC Dispatcher is getting stopped.

former_member587342 · ‎01-10-2014

MMC dispatcher is getting stopped even max:db nsp started in services. log area is not full autolog on.

here i am pasting logs. please check and help to resolve this issue without reinstalling .

please check the dev_disp, dev_ms,dev_w0,sapstart,translog one after one below

Trans.log

4 ETW000 R3trans version 6.19 (release 720 - 06.04.10 - 16:31:00 with UA1430.1 / prepared for CSN 1287305).

4 ETW000 unicode enabled version

4 ETW000 ===============================================

4 ETW000

4 ETW000 date&time : 08.01.2014 - 08:50:19

4 ETW000 control file: <no ctrlfile>

4 ETW000 R3trans was called as follows: R3trans -d

4 ETW000 trace at level 2 opened for a given file pointer

4 ETW000 [dev trc ,00000] Wed Jan 08 08:50:19 2014 1724 0.001724

4 ETW000 [dev trc ,00000] db_con_init called 432 0.002156

4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3

4 ETW000 620 0.002776

4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 37 0.002813

4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 492 0.003305

4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 000007FEF13C0000

4 ETW000 198734 0.202039

4 ETW000 [dev trc ,00000] using "C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 27 0.202066

4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 27 0.202093

4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 12578 0.214671

4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "720.00", patchlevel (0.45) 25733 0.240404

4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 50 0.240454

4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 1013 0.241467

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 1633 0.243100

4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 31 0.243131

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 413 0.243544

4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=000000000202F860) 25 0.243569

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 20 0.243589

4 ETW000 [dev trc ,00000] New connection 0 created 26 0.243615

4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =

4 ETW000 391 0.244006

4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000142536768) 26 0.244032

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 24 0.244056

4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 23 0.244079

4 ETW000 [dev trc ,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3

4 ETW000 34 0.244113

4 ETW000 [dev trc ,00000] find_con_by_name found the following connection: 17 0.244130

4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO , prog =

4 ETW000 43 0.244173

4 ETW000 [dev trc ,00000] { DbSlSdbConnect(con_info_p=0000000000000000) 105 0.244278

4 ETW000 [dev trc ,00000] DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46) 441 0.244719

4 ETW000 [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10) 45 0.244764

4 ETW000 [dev trc ,00000] (0.045) Unknown primary key (note 1459400) 27 0.244791

4 ETW000 [dev trc ,00000] (0.039) Define your own command buffersize (note 1340617) 30 0.244821

4 ETW000 [dev trc ,00000] (0.031) Dbm commands support added (note 1420733) 392 0.245213

4 ETW000 [dev trc ,00000] (0.027) Count of records for bulk insert optimized (note 1340617) 33 0.245246

4 ETW000 [dev trc ,00000] (0.021) Connect with special xuser key (note 1390464) 23 0.245269

4 ETW000 [dev trc ,00000] (0.018) Error handling for external update statistics changed (note 1340617)

4 ETW000 40 0.245309

4 ETW000 [dev trc ,00000] (0.018) Dbsl procedure to update datasource information (note 1340617)

4 ETW000 35 0.245344

4 ETW000 [dev trc ,00000] (0.015) Special describe handling on MaxDB systemtables (note 1382175)

4 ETW000 38 0.245382

4 ETW000 [dev trc ,00000] (0.013) Possibility to disable UPSERT statements (note 1340617) 27 0.245409

4 ETW000 [dev trc ,00000] (0.013) Check for external update statistics changed (note 1340617)

4 ETW000 35 0.245444

4 ETW000 [dev trc ,00000] 21 0.245465

4 ETW000 [dev trc ,00000] -> init() 367 0.245832

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=18) : 0000000003B98D30 (34 bytes allocated) 417 0.246249

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16) : 0000000003B9ECF0 (66 bytes allocated) 123 0.246372

4 ETW000 [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 404 0.246776

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=152000) : 0000000003A8AFB0 (152082 bytes allocated)

4 ETW000 480 0.247256

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=2088000) : 00000000087B0040 (2240098 bytes allocated)

4 ETW000 47 0.247303

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=288000) : 0000000003AB0190 (2528114 bytes allocated)

4 ETW000 42 0.247345

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16144) : 0000000003AF66B0 (2544274 bytes allocated)

4 ETW000 41 0.247386

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=32048) : 0000000003AFA5E0 (2576338 bytes allocated)

4 ETW000 40 0.247426

4 ETW000 [dev trc ,00000] -> loadClientRuntime() 1327 0.248753

4 ETW000 [dev trc ,00000] Loading SQLDBC client runtime ... 39 0.248792

4 ETW000 [dev trc ,00000] Wed Jan 08 08:50:20 2014 204719 0.453511

4 ETW000 [dev trc ,00000] SQLDBC Module : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll 96 0.453607

4 ETW000 [dev trc ,00000] SQLDBC SDK : SQLDBC.H 7.7.4 BUILD 009-123-173-450 23518 0.477125

4 ETW000 [dev trc ,00000] SQLDBC Runtime : libSQLDBC 7.8.1 BUILD 014-121-233-288 34 0.477159

4 ETW000 [dev trc ,00000] SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288 42 0.477201

4 ETW000 [dev trc ,00000] SQLDBC supports new DECIMAL interface : 1 30 0.477231

4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE INPUT data : 1 25 0.477256

4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE OUTPUT data : 1 25 0.477281

4 ETW000 [dev trc ,00000] SQLDBC supports Multiple Streams : 1 25 0.477306

4 ETW000 [dev trc ,00000] SQLDBC supports LOB LOCATOR KEEPALIVE : 1 37 0.477343

4 ETW000 [dev trc ,00000] SQLDBC supports LOB LOCATOR COPY : 1 26 0.477369

4 ETW000 [dev trc ,00000] SQLDBC supports BULK SELECT with LOBS : 1 24 0.477393

4 ETW000 [dev trc ,00000] -> getNewConnection() 25 0.477418

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1896) : 0000000003B07AA0 (2578250 bytes allocated)

4 ETW000 41 0.477459

4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1168) : 0000000003B08220 (2579434 bytes allocated)

4 ETW000 42492 0.519951

4 ETW000 [dev trc ,00000] <- getNewConnection(con_hdl=0) 4253 0.524204

4 ETW000 [dev trc ,00000] -> checkEnvironment(con_hdl=0) 53 0.524257

4 ETW000 [dev trc ,00000] -> connect() 33 0.524290

4 ETW000 [dev trc ,00000] INFO : SQLOPT= -I 0 -t 0 -S SAPR3 60 0.524350

4 ETW000 [dev trc ,00000] Try to connect (DEFAULT) on connection 0 ... 91 0.524441

4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -4001 (POS(1) Unknown user name/password combination in operational state ADMIN)

4 ETW000 60284 0.584725

4 ETW000 [dev trc ,00000] -> SetSapdbCA(errcode=-4001) 34 0.584759

4 ETW000 [dev trc ,00000] -> freeConnection(con_hdl=0) 34 0.584793

4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003B08220, size=1168 (2578250 bytes allocated))

4 ETW000 17023 0.601816

4 ETW000 [dev trc ,00000] close all opened locators of connection 0 13401 0.615217

4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003B07AA0, size=1896 (2576338 bytes allocated))

4 ETW000 44 0.615261

4 ETW000 [dev trc ,00000] } DbSlSdbConnect(rc=99) 19 0.615280

4 ETW000 [dblink ,00000] ***LOG BY2=>sql error -4001 performing CON 57 0.615337

4 ETW000 [dblink ,00000] ***LOG BY0=>POS(1) Unknown user name/password combination in operational state ADMIN

4 ETW000 38 0.615375

4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=41,arg_p=00000001405EC278) 13842 0.629217

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 51 0.629268

4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=14,arg_p=0000000002025E88) 23 0.629291

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.629308

4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=50,arg_p=0000000002025E80) 27 0.629335

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 34 0.629369

4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=13,arg_p=0000000002025EE0) 21 0.629390

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 23 0.629413

4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=52,arg_p=0000000002025EA0) 27 0.629440

4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 33 0.629473

2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"

4 ETW000 [dev trc ,00000] release memory of the SIBU buffers 1394 0.630867

4 ETW000 [dev trc ,00000] release memory of the STATEMENT CACHE 44 0.630911

4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003AFA5E0, size=32048 (2544274 bytes allocated))

4 ETW000 54 0.630965

4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003AF66B0, size=16144 (2528114 bytes allocated))

4 ETW000 38 0.631003

4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003AB0190, size=288000 (2240098 bytes allocated))

4 ETW000 36 0.631039

4 ETW000 [dev trc ,00000] -> sdb_free(p=00000000087B0040, size=2088000 (152082 bytes allocated))

4 ETW000 36 0.631075

4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003A8AFB0, size=152000 (66 bytes allocated)) 214 0.631289

4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003B98D30, size=18 (32 bytes allocated)) 45 0.631334

4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003B9ECF0, size=16 (0 bytes allocated)) 27 0.631361

Dev_Disp

---------------------------------------------------

trc file: "dev_disp", trc level: 1, release: "720"

---------------------------------------------------

sysno 00

sid NSP

systemid 562 (PC with Windows NT)

relno 7200

patchlevel 0

patchno 46

intno 20020600

make multithreaded, Unicode, 64 bit, optimized

profile \\umamalla\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_localhost

pid 5100

Fri Jan 10 06:47:33 2014

kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC)

length of sys_adm_ext is 588 bytes

*** SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 5100) [dpxxdisp.c 1252]

shared lib "dw_xml.dll" version 46 successfully loaded

shared lib "dw_xtc.dll" version 46 successfully loaded

shared lib "dw_stl.dll" version 46 successfully loaded

shared lib "dw_gui.dll" version 46 successfully loaded

Fri Jan 10 06:47:34 2014

shared lib "dw_mdm.dll" version 46 successfully loaded

shared lib "dw_rndrt.dll" version 46 successfully loaded

shared lib "dw_abp.dll" version 46 successfully loaded

shared lib "dw_sym.dll" version 46 successfully loaded

shared lib "dw_aci.dll" version 46 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

use internal message server connection to port 3900

rdisp/dynamic_wp_check : 1

rdisp/calculateLoadAverage : 1

Fri Jan 10 06:47:38 2014

*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds

Fri Jan 10 06:47:39 2014

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6393]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is active

DpIPCInit2: write dp-profile-values into sys_adm_ext

DpIPCInit2: start server >localhost_NSP_00 <

DpShMCreate: sizeof(wp_adm) 31696 (2264)

DpShMCreate: sizeof(tm_adm) 5517056 (27448)

DpShMCreate: sizeof(wp_ca_adm) 64000 (64)

DpShMCreate: sizeof(appc_ca_adm) 64000 (64)

DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080

DpShMCreate: sizeof(comm_adm) 584080 (1144)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064

DpShMCreate: sizeof(slock_adm) 156064 (104)

DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880

DpShMCreate: sizeof(file_adm) 268880 (80)

DpShMCreate: sizeof(vmc_adm) 30128 (2152)

DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: sizeof(j2ee_adm) 3936

DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000BAE0050, size: 6812336)

DpShMCreate: allocated sys_adm at 000000000BAE0060

DpShMCreate: allocated wp_adm_list at 000000000BAE3030

DpShMCreate: allocated wp_adm at 000000000BAE3220

DpShMCreate: allocated tm_adm_list at 000000000BAEAE00

DpShMCreate: allocated tm_adm at 000000000BAEAE50

DpShMCreate: allocated wp_ca_adm at 000000000C02DD60

DpShMCreate: allocated appc_ca_adm at 000000000C03D770

DpShMCreate: allocated comm_adm at 000000000C04D180

DpShMCreate: allocated slock_adm at 000000000C0DBB20

DpShMCreate: allocated file_adm at 000000000C101CD0

DpShMCreate: allocated vmc_adm_list at 000000000C143730

DpShMCreate: allocated vmc_adm at 000000000C1437E0

DpShMCreate: allocated gw_adm at 000000000C14ADA0

DpShMCreate: allocated j2ee_adm at 000000000C14ADE0

DpShMCreate: allocated ca_info at 000000000C14BD50

DpShMCreate: allocated wall_adm at 000000000C14BD70

DpCommAttachTable: attached comm table (header=000000000C04D180/ft=000000000C04D190)

DpSysAdmIntInit: initialize sys_adm

rdisp/test_roll : roll strategy is DP_NORMAL_ROLL

dia token check not active (6 token)

MBUF state OFF

DpCommInitTable: init table for 500 entries

DpFileInitTable: init table for 2800 entries

DpSesCreateTable: created session table at 0000000002F00050 (len=161328)

DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm

rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80

Fri Jan 10 06:47:40 2014

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 4096 kByte.

<ES> Info: em/initial_size_MB( 3003MB) not multiple of em/blocksize_KB( 4096KB)

<ES> Info: em/initial_size_MB rounded up to 3004MB

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 750 blocks reserved for free list.

ES initialized.

*** ERROR => Es2IResCreate: open SAP_ES2_00_003 failed (errno=1455) [es2nt.c 269]

*** ERROR => Es2ResCreateFiles: Es2IResCreate failed [es2xx.c 1324]

*** ERROR => Es2ResGetFreeBlocks: Es2ResCreateFiles failed [es2xx.c 1869]

*** ERROR => Es2CtxCreate: Es2ResGetFreeBlocks failed [es2xx.c 2577]

*** ERROR => Eg2CtxCreate: Es2CtxCreate failed [eg2xx.c 838]

*** ERROR => DpEmInit: Eg2HeapCtxCreate (2) [dpxxdisp.c 10391]

*** ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 10201]

*** DP_FATAL_ERROR => DpSapEnvInit: DpMemInit

*** DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

NiWait: sleep (10000ms) ...

NiISelect: timeout 10000ms

NiISelect: maximum fd=1

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jan 10 06:47:50 2014

NiISelect: TIMEOUT occured (10000ms)

dump system status

Workprocess Table (long) Fri Jan 10 01:17:50 2014

========================

No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table

-------------------------------------------------------------------------------------------------------------------------------

Dispatcher Queue Statistics Fri Jan 10 01:17:50 2014

===========================

+------+--------+--------+--------+------------+------------+

| Typ | now | high | max | writes | reads |

+------+--------+--------+--------+------------+------------+

| NOWP | 0 | 0 | 2000 | 0 | 0 |

+------+--------+--------+--------+------------+------------+

| DIA | 0 | 0 | 2000 | 0 | 0 |

+------+--------+--------+--------+------------+------------+

| UPD | 0 | 0 | 2000 | 0 | 0 |

+------+--------+--------+--------+------------+------------+

| ENQ | 0 | 0 | 2000 | 0 | 0 |

+------+--------+--------+--------+------------+------------+

| BTC | 0 | 0 | 2000 | 0 | 0 |

+------+--------+--------+--------+------------+------------+

| SPO | 0 | 0 | 2000 | 0 | 0 |

+------+--------+--------+--------+------------+------------+

| UP2 | 0 | 0 | 2000 | 0 | 0 |

+------+--------+--------+--------+------------+------------+

max_rq_id 0

wake_evt_udp_now 0

wake events total 0, udp 0 ( 0%), shm 0 ( 0%)

since last update total 0, udp 0 ( 0%), shm 0 ( 0%)

Dump of tm_adm structure: Fri Jan 10 01:17:50 2014

=========================

Term uid man user term lastop mod wp ta a/i (modes)

Workprocess Comm. Area Blocks Fri Jan 10 01:17:50 2014

=============================

Slots: 1000, Used: 0, Max: 0

+------+--------------+----------+-------------+

| id | owner | pid | eyecatcher |

+------+--------------+----------+-------------+

NiWait: sleep (5000ms) ...

NiISelect: timeout 5000ms

NiISelect: maximum fd=1

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Fri Jan 10 06:47:55 2014

NiISelect: TIMEOUT occured (5000ms)

DpHalt: shutdown server >loaclhost_NSP_00 < (normal)

DpJ2eeDisableRestart

DpHalt: switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

DpHalt: stop work processes

DpHalt: terminate gui connections

DpHalt: wait for end of work processes

DpHalt: not attached to the message server

DpHalt: cleanup EM

EsCleanup( )

EsCleanup ....

EmCleanup() -> 0

Em2Cleanup: Cleanup EM2

Eg2Cleanup: Cleanup EG2

Es2Cleanup: Cleanup ES2

Es2ResLocSlotClear: clear slot 0

***LOG Q05=> DpHalt, DPStop ( 5100) [dpxxdisp.c 11107]

DpHalt: Good Bye .....

DEV_MS

---------------------------------------------------

trc file: "dev_ms", trc level: 1, release: "720"

---------------------------------------------------

[Thr 4620] Fri Jan 10 06:47:27 2014

[Thr 4620] ms/http_max_clients = 500 -> 500

[Thr 4620] MsSSetTrcLog: trc logging active, max size = 52428800 bytes

systemid 562 (PC with Windows NT)

relno 7200

patchlevel 0

patchno 43

intno 20020600

make multithreaded, Unicode, 64 bit, optimized

pid 5064

[Thr 4620] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5064) [msxxserv.c 2226]

[Thr 4620] load acl file = C:\usr\sap\NSP\SYS\global\ms_acl_info.DAT

[Thr 4620] MsGetOwnIpAddr: my host addresses are :

[Thr 4620] 1 : [10.10.0.10] localhost (HOSTNAME)

[Thr 4620] 2 : [127.0.0.1] localhost (LOCALHOST)

[Thr 4620] MsHttpInit: full qualified hostname = localhost

[Thr 4620] HTTP logging is switch off

[Thr 4620] set HTTP state to LISTEN

[Thr 4620] *** HTTP port 8100 state LISTEN ***

[Thr 4620] *** I listen to internal port 3900 (3900) ***

[Thr 4620] *** HTTP port 8100 state LISTEN ***

[Thr 4620] CUSTOMER KEY: >X1612181490<

[Thr 4620] build version=720.2010.02.09

[Thr 4956] Fri Jan 10 06:49:04 2014

[Thr 4956] MsSExit: received SIGINT (2)

[Thr 4956] set HTTP state to CLOSED

[Thr 4956] *** HTTP port 8100 state CLOSED ***

[Thr 4956] ***LOG Q02=> MsSHalt, MSStop (Msg Server 5064) [msxxserv.c 7442]

DEV_W0: no data

sapstart:

SAP-R/3-Startup Program

Starting at 2014/01/10 6:47:24

Startup Profile: "\\localhost\sapmnt\NSP\SYS\profile\START_DVEBMGS00_localhost"

Starting Programs

(4772) Execute: C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=\\localhost\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_localhost

(2912) Execute: C:\usr\sap\NSP\SYS\exe\uc\NTAMD64\strdbs.cmd NSP

(5064) CreateProcess: C:\usr\sap\NSP\DVEBMGS00\exe\msg_server.EXE pf=\\localhost\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_localhost

(5100) CreateProcess: C:\usr\sap\NSP\DVEBMGS00\exe\disp+work.EXE pf=\\localhost\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_localhost

(1628) Parent Shutdown at 2014/01/10 6:49:04

(1628) kill(SIGINT 5100) failed.

Send Signal SIGKILL to Process 5100

Former Member · ‎03-21-2014

Hi

you need to resolve first Database connectivity error.

http://help.sap.de/saphelp_crm700_ehp02/helpdata/de/85/2edd656edc4c70be6becb3b7715da3/content.htm

http://maxdb.sap.com/doc/7_7/44/ed6f9dc85b67d6e10000000a155369/content.htm

Follow the above steps and retry to test the R3trans -d after its success, then you can retry sapstart.

Regards

Raj

former_member186228 · ‎01-10-2014

Hi,

Log in as <sid>adm user, open command prompt and run below command

dbmcli -d <SID> -u superdba,<password>

db_state

if db_state is indicating Admin mode change it to online by using below command,

db_online

regards,

Jithin

Former Member · ‎01-10-2014

Hi

Please check that the DB is in Open Mode .. are you able to login via DB Studio / DBM GUI and then confirm that the Database is not in Admin mode..

Could see the following error message :

* ERROR => Connect to database failed, rc = -4001 (POS(1) Unknown user name/password combination in operational state ADMIN)

Thanks

Rishi

SAP MMC Dispatcher is getting stopped.

Accepted Solutions (0)

Answers (3)

Answers (3)

How to use CopyProvider on Table created by TypeSc...

How to execute/fire onPost when user press enter o...

Re: Connecting SAP CAP with SAP Cloud ALM

Re: How can assign in Identity Authentication Serv...

Re: Are there plans to update the Spring framework...