cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to logging after system refresh.

Former Member
0 Kudos

Hi All,

Recently we refreshed from our test system with Quality database. After refresh when I am able to log in in to the system it is giving me an error.

GUI prompt is coming after entering the log in id credentials I am getting the error.

I am attaching the error screen shot.

Regards,

Anil

Accepted Solutions (0)

Answers (3)

Answers (3)

Former Member
0 Kudos

Hi All, Thanks for the replies... We find out the error.... Error : The functional modules which has bee stored in $ENQ package has been corrupted, we restored the same via OS level. Once again thanks... Anil.

Former Member
0 Kudos

Hi, Please find the log file of dev_w0. Anil.B

ACE-SAP
Active Contributor
0 Kudos

tail command only extract the last lines of a file...

Use head command instead or provide the complete dev_w0 file

Former Member
0 Kudos

Hi, I am attaching the entire log file you can save and right click open as "WORDPAD"

ACE-SAP
Active Contributor
0 Kudos

No error in that file but it is the trace for a V2 update process...

Please upload dev_w0 and dev_disp

Former Member
0 Kudos

Hi, Please find the mentioned two log files also. Anil.B

ACE-SAP
Active Contributor
0 Kudos

I'm sorry but there are not errors in these files, are you sure the are complete, latest message is from yesterday...

Former Member
0 Kudos

Hi, yes those are completed files. Let me know where else I can check for an error.....??? Did you have any specific corners where these type of error's will occur. Anil.B

ACE-SAP
Active Contributor
0 Kudos

Post the full log of dev_w52  as the error was occurring in that process.

There are not that much of place you can search when Gui logon is not possible.

Maybe you can try to RFC connect from another system (defined an RFC dest to that system).

Former Member
0 Kudos

Hi , Please find the full log of dev_w52 Anil.B

ACE-SAP
Active Contributor
0 Kudos

Sorry there were error in w21, please post the full dev_W21 file.

[...]

SemRel: Inv. Operation. Units 1. Key=51

[...]

A  ABAP Program .

A  Source LSCSMROUTEU09                            Line 201.

A  Error Code CALL_FUNCTION_NOT_ACTIVE.

ACE-SAP
Active Contributor
0 Kudos

Hi

Try to read the system log using SAP Mgt Console.

Check the workprocess logs

Regards

http://<hostname>:50013/sapmc/sapmc.html?SID=<SID>&NR=<System_Number>&HOST=<hostname>


Former Member
0 Kudos

Hi,

Thanks for quick response.

My OS is Linux and DB is Oracle 11.0.2.3

I am unable to run the given link.

Regards,

Anil.

former_member183424
Active Contributor
0 Kudos

Re instal the GUI and try again....

was 720 working perfect ??

It shows SAP GUI for windows..

And you are using Linux..

I am pretty doubt it will work in Linux...

Former Member
0 Kudos

Hi Dev,

My OS means here it is where my SAP is running.

I checked at 7.30 & 7.10 same error I have to check at 7.20.

Regards,

Anil.

former_member183424
Active Contributor
0 Kudos

Its bit depend on your operating system (where you are trying to instal the SAP Gui)...

I have also faced the same problem in my Home PC for 730, where my 720 is running well.... But I have successfully run 730 in my office PC...

Re-install the GUI and try again....

Sriram2009
Active Contributor
0 Kudos
Former Member
0 Kudos

Hi Sriram,

I think you didn't understand my problem (NWBC is not a problem here) I am not able to log-in in to the system after giving my user id credentials.

Anil.B

ACE-SAP
Active Contributor
0 Kudos

As you cannot login & do not get access to Mgt console the only thing that can help is to provide workprocess log... at least dev_disp & dev_w0

Files can be found, depending on your OS, in

/usr/sap/<SID>/DVEBMGS00/work

<drv>:\usr\sap\<SID>\DVEBMGS00\work

Regards

Former Member
0 Kudos

Hi, Please find the dev_w0 log.       tail -100 dev_w21 A  ** RABAX: level LEV_RX_END entered. A  ** RABAX: level LEV_RX_END completed. A  ** RABAX: end no http/smtp A  ** RABAX: end RX_BTCHLOG|RX_VBLOG A  The function module is not active or contains no code.. A A A Fri Feb 21 04:06:45 2014 A  Localtime1 1392973605, Loaltime2 1392973605, Localtime3 1392973605 A  DBTime1 1392973605, DBTime2 1392973605 A  Average loctime 1392973605, Average DBTime 1392973605, Diff 0 A  Returncodes codes db_time 0 0 0 A  Local time adjusted (0 sec). A A Fri Feb 21 04:09:45 2014 A  TH VERBOSE LEVEL FULL A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered. A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed. A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered. A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed. A  ** RABAX: level LEV_RX_HOTSPOT_TRACE entered. A  ** RABAX: level LEV_RX_HOTSPOT_TRACE completed. A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS entered. A  ** RABAX: level LEV_RX_SAVE_SHMLOCKS completed. A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered. A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed. A  ** RABAX: level LEV_RX_ROLLBACK entered. A  ** RABAX: level LEV_RX_ROLLBACK completed. A  ** RABAX: level LEV_RX_DB_ALIVE entered. A  ** RABAX: level LEV_RX_DB_ALIVE completed. A  ** RABAX: level LEV_RX_HOOKS entered. I  *** ERROR => SemRel: Inv. Operation. Units 1. Key=51 [semux.c      1337] I  {root-id=0050569F34351ED3A6DAFCFFEFD10E1E}_{conn-id=00000000000000000000000000000000}_0 A  ** RABAX: level LEV_RX_HOOKS completed. A  ** RABAX: level LEV_RX_STANDARD entered. A  ** RABAX: level LEV_RX_STANDARD completed. A  ** RABAX: level LEV_RX_STOR_VALUES entered. A  ** RABAX: level LEV_RX_STOR_VALUES completed. A  ** RABAX: level LEV_RX_C_STACK entered. A  ** RABAX: level LEV_RX_C_STACK completed. A  ** RABAX: level LEV_RX_MEMO_CHECK entered. A  ** RABAX: level LEV_RX_MEMO_CHECK completed. A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered. A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed. A  ** RABAX: level LEV_RX_INTERFACES entered. A  ** RABAX: level LEV_RX_INTERFACES completed. A  ** RABAX: level LEV_RX_GET_MESS entered. A  ** RABAX: level LEV_RX_GET_MESS completed. A  ** RABAX: level LEV_RX_INIT_SNAP entered. A  ** RABAX: level LEV_RX_INIT_SNAP completed. A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered. A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed. A  ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered. A  ** RABAX: level LEV_RX_WRITE_SNAP_BEG completed. A  ** RABAX: level LEV_RX_WRITE_SNAP entered. A  ** RABAX: level LEV_SN_END completed. A  ** RABAX: level LEV_RX_WRITE_SNAP_END entered. A  ** RABAX: level LEV_RX_WRITE_SNAP_END completed. A  ** RABAX: level LEV_RX_RAL_FOR_RABAX entered. A  ** RABAX: level LEV_RX_RAL_FOR_RABAX completed. A  ** RABAX: level LEV_RX_SET_ALERT entered. A  ** RABAX: level LEV_RX_SET_ALERT completed. A  ** RABAX: level LEV_RX_COMMIT entered. A  ** RABAX: level LEV_RX_COMMIT completed. A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered. A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed. A  ** RABAX: level LEV_RX_RESET_PROGS entered. A  ** RABAX: level LEV_RX_RESET_PROGS completed. A  ** RABAX: level LEV_RX_STDERR entered. A  Fri Feb 21 04:09:45 2014 A A  ABAP Program SAPLSCSMROUTE                          . A  Source LSCSMROUTEU09                            Line 201. A  Error Code CALL_FUNCTION_NOT_ACTIVE. A  Module  $Id: //bas/721_REL/src/krn/runt/abfunc.c#6 $ SAP. A  Function ab_jfunc Line 754. A  ** RABAX: level LEV_RX_STDERR completed. A  ** RABAX: level LEV_RX_RFC_ERROR entered. A  ** RABAX: level LEV_RX_RFC_ERROR completed. A  ** RABAX: level LEV_RX_RFC_CLOSE entered. A  ** RABAX: level LEV_RX_RFC_CLOSE completed. A  ** RABAX: level LEV_RX_IMC_ERROR entered. A  ** RABAX: level LEV_RX_IMC_ERROR completed. A  ** RABAX: level LEV_RX_DATASET_CLOSE entered. A  ** RABAX: level LEV_RX_DATASET_CLOSE completed. A  ** RABAX: level LEV_RX_ERROR_SAVE entered. A  ** RABAX: level LEV_RX_ERROR_SAVE completed. A  ** RABAX: level LEV_RX_ERROR_TPDA entered. A  ** RABAX: level LEV_RX_ERROR_TPDA completed. A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered. A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed. A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered. A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed. A  ** RABAX: level LEV_RX_END entered. A  ** RABAX: level LEV_RX_END completed. A  ** RABAX: end no http/smtp A  ** RABAX: end RX_BTCHLOG|RX_VBLOG A  The function module is not active or contains no code.. Regards, Anil.B

ACE-SAP
Active Contributor
0 Kudos

Please post the first lines as they are more important than the last one to detect the root cause...

It is possible to attach the file to the answer if you want