on 04-14-2014 5:08 AM
Hi All,
In Kit to stock process I have done all required configurations
When I create a production order in ECC system and release, Inbound and outbound deliveries are getting created in EWM but are in locked status and in error log I am getting a message "No VAS order has been created for document" Message no. /SCWM/DELIVERY310
To simulate issue with VAS order creation when I tried to create VAS order with transaction /n/SCM/VAS_KTS I am getting below error
Message no. /SCWM/DELIVERY235
Not able to resolve the issue, please help
With best regards
Shankarling
Hi
As your IBD and OBD is created it means your almost done.
For Vas order, check Packspec and condition record to created vas order.
in a config check proper packspec procedure for picking KTO for your dels >> under Define Relevance for VAS for your IBD and OBD document types and item type links
check packspec level type as kitting is flaged.
Also after making any config check create new del .
Regards
Suraj
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Thanks Shankarling,
I remember having the same error you were getting and later found out that i had missing number range for VAS Order. I am still not able to create the deliveries in ECC but will keep looking. I had this set up before in another system and was using HOD and HID delivery types in ECC i was surprised to see you use DOG and DIG.
Thanks,
Faical
Hi Shankarling
Check VAS no range>>
Check some below stuff for SAP Lab>>
Bold is imp and checking points and please update if it worked with complete setting.
EWM System:
You have defined document types that are intended for the kit-to-stock process. You have defined item types for these document types.
The document and item types of the ERP deliveries are mapped onto these EWM document types.
PPF action for VAS order automatically>>
The action profile of the document type that the system found for the inbound delivery contains a PPF action for creating the VAS order automatically.
A packaging specification exists for the kit product.
You have defined a VAS order type for kit to stock. The document and item types mentioned previously are assigned to this order type.
>>
1. You create a production order either manually in the ERP system, or from planning.
2. The ERP system generates an inbound delivery for the kit header, and an outbound delivery for the kit components.
3. The system transfers both deliveries to the EWM system. Serializing the messages to the EWM system is done based on the document number of the ERP outbound delivery. All confirmations from the EWM system to the ERP system are serialized based on the document number of the ERP outbound delivery.
4. The EWM system first generates the outbound delivery request and the outbound delivery order. It then generates the inbound delivery notification and the inbound delivery. A PPF action, which triggers automatic creation of the VAS order, is defined for the inbound delivery.
You can find the document number of the VAS order in the form of a document flow entry for all items of the inbound delivery and outbound delivery order.
5. During confirmation of goods issue of the kit components and of goods receipt of the kit in the EWM system, goods receipt and goods issue are automatically confirmed to the ERP system.
If you want to start kit to stock or reverse kitting in the EWM system locally, the ERP system must be able to receive inbound and outbound deliveries that you have created locally in your EWM system. For this, you need to have selected the following in Customizing under Create / Delete Inbound Deliveries → Local Creation of Inbound Delivery in EWM. In addition, you need to have selected initial under Distr. of Direct Outb. Deliveries or Distribution Relevance of Locally Created Outb. Deliveries. For more information, see the Implementation Guide (IMG) for EWM under Interfaces → ERP Integration → General Settings → Set Control Parameters for ERP Version Control.
Also note the following constraints:
Deleting inbound and outbound deliveries as part of kit to stock is only possible if you have selected parameters Deletion of Inbound Delivery Possible and Deletion of Outbound Delivery Possible in Customizing.
If the ERP system cannot post partial goods receipt, you can only post complete kit quantities or component quantities in the underlying value-added services.
Start in the ERP System - Goods Receipt - SAP Library
Kit to Stock - Goods Receipt - SAP Library
Regards
Suraj
Hi Suraj,
Thank you very much for the details and I had gone through the details you have provided and all are in place and I am able to create Inbound and outbound deliveries but I am getting error in automatic VAS order creation process and getting below error
Message no. /SCWM/VAS122
The system attempted to check whether a VAS order must be generated automatically, or it attempted to generate the VAS order automatically. An error occurred here.
The error affects inbound delivery &1, item &2.
The system was unable to perform the check for whether a VAS order must be generated automatically, or it was unable to generate the VAS order automatically. The following possible errors may have caused this:
Error Code | Cause of Error |
---|---|
NI | No items could be determined for the inbound delivery |
PS | Unable to determine the packaging specification |
WH | Unable to determine a warehouse number from the delivery |
UD | Errors occurred while updating the delivery |
ND | Unable to read a delivery |
PO | Inbound delivery has no reference to production order |
SV | Error while saving VAS order |
Call transaction sppfp.
For the application key, enter the document number of the inbound delivery, and leave the Time of Processing field empty.
Select the action definition /SCWM/PRD_IN_VAS_CREATE_KTS from the results list and execute the action again.
If still no VAS order is generated, contact your system administrator.
Message no. /SCWM/DELIVERY311
The system attempts to automatically create an order for value-added service (VAS order). Since the system cannot create the VAS order immediately, it displays the Post Processing Framework action (PPF-Action) with an error status in the delivery.
The system continues to attempt to automatically create a VAS order via an internal queued Remote Function Call (qRFC).
With best regards
Shankarling
Hi
your error details has all details to check.
Below are very imp point check all in ur customization. This are only causing ur issue.
NI | No items could be determined for the inbound delivery |
PS | Unable to determine the packaging specification |
WH | Unable to determine a warehouse number from the delivery |
UD | Errors occurred while updating the delivery |
ND | Unable to read a delivery |
PO | Inbound delivery has no reference to production order |
SV | Error while saving VAS order |
Check this >> PPF log from PPF report and try to reprocess see why system is not processing that PPF action.
The system attempts to automatically create an order for value-added service (VAS order). Since the system cannot create the VAS order immediately, it displays the Post Processing Framework action (PPF-Action) with an error status in the delivery.
Regards
Suraj
Hi Suraj,
Issue was related to missing Reference document categories PPO & VAS in inbound delivery reference document type profile
SPRO - EWM - Cross Process Settings - Delivery processing - Reference Documents - Define Reference Document Type Profile
I have assgined Reference document categories PPO & VAS in below inbound delivery reference document type profiles
/SCWM/INB_REQ_KTS
/SCWM/INB_PRD_KTS_KTR
/SCWM/INB_REQ_DLV_KTS
/SCWM/INB_PRD_DLV_KTS_KTR
With best regards
Shankarling
Hi Shankarling,
I hope you had your question answered. I am also trying to configure the KTS scenario starting from ECC using Production Order. However I am not getting the inbound and outbound delivery to create in ECC. I did the necessary configuration in OMK0 but still no luck. Do you have any pointers that can help me.
Thanks,
faical
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Faical,
Unfortunately I haven't got any answer yet, I could create Inbound and Outbound deliveries but they are in locked status
Check below configuration for creation of inbound and outbound deliveries
Direct outbound deliveries in ECC
and Determine delivery type for manufacturing related inbound deliveries
With best regards
Shankarling
User | Count |
---|---|
7 | |
4 | |
3 | |
2 | |
2 | |
1 | |
1 | |
1 | |
1 | |
1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.