Java 7.3 doesnt start after Reinstall DAA

[denny-k]

After uninstall and reinstall DAA for our Java-Server one doesnt start anymore.

Last Errorlog:

Error opening zip file or JAR manifest missing : /usr/sap/DA1/SMDA96/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar

Error occurred during initialization of VM

agent library failed to init: instrument

In MMC i can see "Processes starting" - thats all.

In Solman_Setup we see at point 7 that also Introscope Host Adapter is yellow and "Installation of Bytecode" is red.

In the admin-area of Introscope we cannot get any connection to IS-Agent.

I found a notice that i should remove wily-entries in instance.properties or in configtool.

I tried it in instance.properties but doesnt work. In the configtool i cannot finde the way to remove wily for a new sync..

Thanks in advance.

[divyanshu_srivastava3 · Accepted solution]

Go in config tool and remove Wily parameters from each server nodes.

[denny-k · Accepted solution]

where can i find them there in the configtool?

[divyanshu_srivastava3 · Accepted solution]

Click on server node in config tool.

You will see a white pace containing patameters.

You can remove the Agent/WILY parameter from there.

Also, share std_server0.out

Divyanshu

[denny-k · Accepted solution]

std_server0.out

started at  : Mon Jul 28 13:50:28 2014

JVMX version - Aug 11 2011 01:11:16 - 61_REL - optU - solaris sparc - 6 - bas2:158131 (mixed mode)

Error opening zip file or JAR manifest missing : /usr/sap/DA1/SMDA96/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar

Error occurred during initialization of VM

agent library failed to init: instrument

[denny-k · Accepted solution]

do you mean:

Instance --> VM Parameters --> System ?

[divyanshu_srivastava3 · Accepted solution]

There are the parameters:

-Dcom.wily.introscope.agentProfile=<drive>:/usr/sap/ccms/wily/IntroscopeAgent.profile

-Dcom.wily.introscope.agent.agentName=<AgentName>

-Xbootclasspath/p:<drive>:/usr/sap/ccms/wily/connectors/connector.jar:<drive>:/usr/sap/ccms/ wily/Agent.jar

Remove them from server nodes in configtool

Configurations -> cluster-data -> server

General -- Java Paremeters.

Divyanshu

[denny-k · Accepted solution]

yes, i can see them. when i try to delete it there i get this error:

when i go through configuration menu i cannot find your way:

[divyanshu_srivastava3 · Accepted solution]

Sorry for the typo.

It was cluster data - instance - server0.

Stop everything.

Stop DA1

Open configtool.

Delete parameters.

Restart SAP.

Divyanshu

[denny-k · Accepted solution]

When i try to delete it in "VM Parameters" i get the error message i sent to you a few minutes ago.

This is the way i took:

Is that wrong? Im not able to remove it. Only databse is up and running. DAA stopped.

Thank you in advance

[divyanshu_srivastava3 · Accepted solution]

If you can't remove it then disable it from the checkbox at the right side.

[denny-k · Accepted solution]

I get the same error when trying to disable it.

[divyanshu_srivastava3 · Accepted solution]

What is your OS ?

[denny-k · Accepted solution]

Sun Solaris 10

[divyanshu_srivastava3 · Accepted solution]

Hi Dennis,

Go with below two notes:

1504655 - Wily can't be loaded with SAP JVM 6 under AIX

1975559 - Java system not restarting after installing Introscope Agent with error "agent library fai...

Divyanshu

[denny-k · Accepted solution]

I took the directory out of a backup and the system starts now.. !!

But why did the deinstallation of DAA influenced the wily-directorys?

[denny-k · Accepted solution]

Ive installed the DAA on three Java-Systems.

2 of them have got this error and the difference is:

Java-SAP that works:

/usr/sap/DA8/SMDA89/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.9.1.0.0-2011-12-15

Java-SAPs that dont work:

/usr/sap/DA8/SMDA89/SMDAgent/applications.config/com.sap.smd.agent.application.wily

EMPTY

Now i recover the old directory ISAGENT.8.2.3.5-2011-09-13 (stands also in the configtool) and the system starts. But in solman_setup i cannot connect to IntroscopeHostadapter, etc.. Strange

[denny-k · Accepted solution]

Ok. I was wrong. The systems still doesnt start..

[divyanshu_srivastava3 · Accepted solution]

Since it cannot be removed from configtool

Start daa

Refer:

Troubleshooting Introscope Agent setup - Solution Manager - SCN Wiki

Prerequisites - SAP Solution Manager Setup - SCN Wiki

Divyanshu

[denny-k · Accepted solution]

This troubleshoot-document is from 2011 and the menupoints in it dont exists in Solman 7.1 ...

[divyanshu_srivastava3 · Accepted solution]

Goto agent admin, this you can go from MSC from connect diagnostic agent tab.

Then goto application management and deploy agent.

Divyanshu

[daiwdsap]

Hi, having the exact same problem.

Please provide clear steps in configtool to adjust the wily params? (Which parameter did you change?)

Tx

[Former Member]

Hello,

I have the similar problem with my java 7.3 and DAA, agent has been re-installed.

Similar, I cannot remove wily from configtool.

I resolve my problem throw SMD/AgentAdmin -> Applications Managment and deploy wily(looking on version) on  agent.

After it

SMD/AgentAdmin, -> Advanced Settings -> Diagnostics Agent Support Tool -> Agent Runtime --> Bytecode Agent and click on Get, It's create on host level (/usr/sap/DAA/SMDA98/SMDAgent/applications.config/com.sap.smd.agent.application.wily) BytecodeAgent folder and subfolder with agent.jar which used for Java machine start.

[Former Member]

Dmitriy Borisov - Your suggestion has worked for my same issue. Thanks.

[stphane_guilbault]

Dmitriy Borisov - Your suggestion has worked for us as well. Thanks.

[PaoloColleoni]

I had had similar problem.

In order to edit the parameters for configtool I used tool "consoleconfig".

You can find it under the same directory of configtool; e.g.

        /usr/sap/<SID>/<instance>/j2ee/cluster/configtool

run:

    UNIX: consoleconfig.sh   WINDOWS: consoleconfig.bat

Whit this tool I set parameter

/usr/sap/DA1/SMDA96/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar

to default (the parameter is removed).

Some useful link for consoleconfig usage:

---How to set Java VM parameters using consoleconfig tool  --

http://wiki.scn.sap.com/wiki/display/TechTSG/How+to+set+Java+VM+parameters+using+consoleconfig+tool

---- Help sap NW73 Command Console Config Tool  --

https://help.sap.com/saphelp_nw73/helpdata/de/74/9d74ab01274c979fb43007bdfbc2f3/content.htm

[former_member185239]

Hi Dennis,

Remove all the wily parameter in configtool or look for the file Agent.jar in the below directory.

/usr/sap/DA1/SMDA96/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar

With Regards

Ashutosh Chaturvedi

[denny-k]

Hi..

There is nothing in this folder:

/usr/sap/DA1/SMDA96/SMDAgent/applications.config/com.sap.smd.agent.application.wily)

ls -la

-rw-r--r--   1 da1adm   sapsys       272 Jul 28 13:02 _Default_Configuration.properties

drwxr-xr-x   2 da1adm   sapsys         3 Jul 28 10:34 .

drwxr-xr-x  41 da1adm   sapsys        41 Jul 28 10:34 ..

[former_member185239]

Hi Dennis,

Try to start the DAA. and then check the Ajent.jar file in the below location

/usr/sap/DA1/SMDA96/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar

With Regards

Ashutosh Chaturvedi

[denny-k]

Hi

The directory

/usr/sap/DA1/SMDA96/SMDAgent/applications.config/com.sap.smd.agent.application.wily/

is empty!

It seems to me as if it still searching the old installation?