on 10-24-2014 8:38 AM
Hi Danny,
Check if this is a calculated characteristic. You didn't attach the screen of the second screen of control indicators. There is an indicator 'Calc. charac.'. In the tab 'Quantitative data' of characteristic details, you can maintain formulas.
In this case, the characteristic result is calculated by the inputted formular and not intended for manual input.
Br,
Nancy
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Danny,
Why you have selected 'Lower specific limit', 'Upper specific limit' and 'Check traget value' in MIC control indicators. Try to deselect 'Check traget value' and check again.
Also check if any DMR is used for the MIC in inspection plan.
Please share whether this helps you.
Best Regards,
Gururaj Kulkarni
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Danny,
Pl. check the Lower - Upper and Target values set for the MIC. There seems to be some error in it. Regards, KrishnaM
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
89 | |
8 | |
7 | |
4 | |
4 | |
3 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.