Solved: After Upgrade kernel not compatible with system (r...

former_member196664 · ‎01-14-2015

Hi All,

I upgraded CRM system from 6.0 to 7.02. System is very slow and dispatcher is often getting stopped in the night time. I have posted disp trace. Please help ASAP. Kernel 7.21_EXT patch 400. SQL 2008/Windows 2008. Solman MOPZ calculated the kernel target. I also checked in PAM, that kernel release is fine for the target. "stoc check failed kernel not compatible with system (rc=-100)". I have also attached dev_ms.

---------------------------------------------------

trc file: "dev_disp", trc level: 1, release: "721"

---------------------------------------------------

sysno 00

sid CRD

systemid 562 (PC with Windows NT)

relno 7210

patchlevel 0

patchno 400

intno 20020600

make multithreaded, Unicode, 64 bit, optimized

profile F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

pid 3664

kernel runs with dp version 139000(ext=121000) (@(#) DPLIB-INT-VERSION-139000-UC)

length of sys_adm_ext is 592 bytes

*** SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 3664) [dpxxdisp.c 1323]

shared lib "dw_xml.dll" version 400 successfully loaded

shared lib "dw_xtc.dll" version 400 successfully loaded

shared lib "dw_stl.dll" version 400 successfully loaded

shared lib "dw_gui.dll" version 400 successfully loaded

shared lib "dw_mdm.dll" version 400 successfully loaded

shared lib "dw_rndrt.dll" version 400 successfully loaded

shared lib "dw_abp.dll" version 400 successfully loaded

shared lib "dw_sym.dll" version 400 successfully loaded

shared lib "dw_aci.dll" version 400 successfully loaded

rdisp/softcancel_sequence : -> 0,5,-1

use internal message server connection to port 3900

rdisp/dynamic_wp_check : 1

rdisp/calculateLoadAverage : 1

Tue Jan 13 08:39:57 2015

*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6525]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is active

display_tcp_ip: 0

Set Check Logoff Flags to 0x0

DpIPCInit2: write dp-profile-values into sys_adm_ext

DpIPCInit2: start server >SAPCRMDEV_CRD_00 <

DpShMCreate: sizeof(wp_adm) 49632 (2256)

DpShMCreate: sizeof(tm_adm) 5517056 (27448)

DpShMCreate: sizeof(wp_ca_adm) 64000 (64)

DpShMCreate: sizeof(appc_ca_adm) 128000 (64)

DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1392064/1392080

DpShMCreate: sizeof(comm_adm) 1392080 (2768)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/163904/96560/260512

DpShMCreate: sizeof(slock_adm) 260512 (296)

DpFileTableSize: max/headSize/ftSize/tableSize=4400/16/422464/422480

DpShMCreate: sizeof(file_adm) 422480 (80)

DpShMCreate: sizeof(vmc_adm) 47520 (2160)

DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: sizeof(j2ee_adm) 3952

DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000076C0050, size: 7984112)

DpShMCreate: allocated sys_adm at 00000000076C0060

DpShMCreate: allocated wp_adm_list at 00000000076C30B0

DpShMCreate: allocated wp_adm at 00000000076C32A0

DpShMCreate: allocated tm_adm_list at 00000000076CF490

DpShMCreate: allocated tm_adm at 00000000076CF4E0

DpShMCreate: allocated wp_ca_adm at 0000000007C123F0

DpShMCreate: allocated appc_ca_adm at 0000000007C21E00

DpShMCreate: allocated comm_adm at 0000000007C41210

DpShMCreate: allocated slock_adm at 0000000007D94FF0

DpShMCreate: allocated file_adm at 0000000007DD49A0

DpShMCreate: allocated vmc_adm_list at 0000000007E3BC00

DpShMCreate: allocated vmc_adm at 0000000007E3BCB0

DpShMCreate: allocated gw_adm at 0000000007E47660

DpShMCreate: allocated j2ee_adm at 0000000007E476A0

DpShMCreate: allocated ca_info at 0000000007E48620

DpShMCreate: allocated wall_adm at 0000000007E486B0

DpCommAttachTable: attached comm table (header=0000000007C41210/ft=0000000007C41220)

DpSysAdmIntInit: initialize sys_adm

rdisp/test_roll : roll strategy is DP_NORMAL_ROLL

dia token check not active (9 token)

MBUF state OFF

DpCommInitTable: init table for 500 entries

DpFileInitTable: init table for 4400 entries

DpSesCreateTable: created session table at 00000000034B0050 (len=167472)

DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm

rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> EsILock: use Mutex for locking

<ES> InitFreeList

ES> block size is 4096 kByte.

Using implementation view

<EsNT> Using memory model view.

<EsNT> Memory Reset disabled as NT default

<ES> 2865 blocks reserved for free list.

ES initialized.

mm.dump: set maximum dump mem to 192 MB

mm.dump: set global maximum dump mem to 192 MB

EsRegisterEmCheck: Register EmGetEsHandles at 00000001402B4270

Es2ResCreate: Changed resource parameters to

filenamePrefix =

blockSizeKB = 2048 KB

initialSizeMB = 480 MB

extendSizeMB = 240 MB

maxSizeMB = 15840 MB

DpVmcSetActive: set vmc state DP_VMC_ENABLED

DpVmcSetActive: set vmc state DP_VMC_ACTIVE

DpVmcInit2: o.k.

MPI: dynamic quotas disabled.

MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%

*** WARNING => DpJ2eeStart: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance (info=0x301) [dpxxj2ee.c 343]

J2EE server info

start = TRUE

state = STARTED

pid = 4888

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=65000

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

rdisp/http_min_wait_dia_wp : 1 -> 1

**LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1709]

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

MBUF state LOADING

DpStartStopMsg: send start message (myname is >SAPCRMDEV_CRD_00 <)

DpStartStopMsg: start msg sent

Tue Jan 13 08:39:58 2015

CCMS: Initialized monitoring segment of size 60000000.

CCMS: Initialized CCMS Headers in the shared monitoring segment.

CCMS: Checking Downtime Configuration of Monitoring Segment.

CCMS: AlMsUpload called by wp 1024.

Tue Jan 13 08:39:59 2015

CCMS: AlMsUpload successful for F:\usr\sap\CRD\DVEBMGS00\log\ALMTTREE.DAT (2844 MTEs).

Tue Jan 13 08:40:05 2015

CCMS: start to initalize 3.X shared alert area (first segment).

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

DpWpBlksLow: max wp blocks in queue is 800 (80 %)

MBUF component UP

DpMsgProcess: 1 server in MBUF

DpAppcBlksLow: max appc blocks in queue is 1000 (50 %)

Tue Jan 13 08:40:37 2015

*** ERROR => [DpProcDied] Process died (PID:4888 HANDLE:952 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:40:57 2015

J2EE server info

start = TRUE

state = STARTED

pid = 3752

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64998

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:40:59 2015

DpModState: change server state from STARTING to ACTIVE

Tue Jan 13 08:41:17 2015

*** ERROR => [DpProcDied] Process died (PID:3752 HANDLE:1308 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:41:37 2015

J2EE server info

start = TRUE

state = STARTED

pid = 2496

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64997

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:41:57 2015

*** ERROR => [DpProcDied] Process died (PID:2496 HANDLE:1320 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:42:17 2015

J2EE server info

start = TRUE

state = STARTED

pid = 2120

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64996

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:42:37 2015

*** ERROR => [DpProcDied] Process died (PID:2120 HANDLE:1328 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:42:58 2015

J2EE server info

start = TRUE

state = STARTED

pid = 6024

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64995

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:43:18 2015

*** ERROR => [DpProcDied] Process died (PID:6024 HANDLE:656 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:43:38 2015

J2EE server info

start = TRUE

state = STARTED

pid = 5728

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64994

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:43:58 2015

*** ERROR => [DpProcDied] Process died (PID:5728 HANDLE:484 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:44:07 2015

*** ERROR => DpMsgProcess: MsReceive () -> MSEPARTNERUNKNOWN, partner: - [dpxxdisp.c 2601]

Tue Jan 13 08:44:18 2015

J2EE server info

start = TRUE

state = STARTED

pid = 6524

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64992

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:44:38 2015

*** ERROR => [DpProcDied] Process died (PID:6524 HANDLE:944 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:44:58 2015

J2EE server info

start = TRUE

state = STARTED

pid = 6692

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64991

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:45:18 2015

*** ERROR => [DpProcDied] Process died (PID:6692 HANDLE:484 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:45:21 2015

*** ERROR => DpMsgProcess: MsReceive () -> MSEPARTNERUNKNOWN, partner: - [dpxxdisp.c 2601]

Tue Jan 13 08:45:38 2015

J2EE server info

start = TRUE

state = STARTED

pid = 6856

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64990

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:45:58 2015

*** ERROR => [DpProcDied] Process died (PID:6856 HANDLE:656 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:46:18 2015

J2EE server info

start = TRUE

state = STARTED

pid = 7152

argv[0] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[1] = F:\usr\sap\CRD\DVEBMGS00\exe\jcontrol.EXE

argv[2] = pf=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[3] = -DSAPSTART=1

argv[4] = -DCONNECT_PORT=64989

argv[5] = -DSAPSYSTEM=00

argv[6] = -DSAPSYSTEMNAME=CRD

argv[7] = -DSAPMYNAME=SAPCRMDEV_CRD_00

argv[8] = -DSAPPROFILE=F:\usr\sap\CRD\SYS\profile\CRD_DVEBMGS00_SAPCRMDEV

argv[9] = -DFRFC_FALLBACK=ON

argv[10] = -DFRFC_FALLBACK_HOST=localhost

start_lazy = 0

start_control = SAP J2EE startup framework

DpJ2eeStart: j2ee state = STARTED

Tue Jan 13 08:46:38 2015

*** ERROR => [DpProcDied] Process died (PID:7152 HANDLE:1308 rc:0x0) [dpnttool2.c 147]

DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN

Tue Jan 13 08:46:58 2015

DpEnvCheckJ2ee: switch off j2ee start flag

Tue Jan 13 09:35:56 2015

*** ERROR => 13.01.2015 14:35:56.034 PID=3664, TID=4196 SapTimer error. SapTime differs from Windows time. ERRORS: 0, SapTime-WindowsUtcTime=-85 seconds. TotalTimeCorrection=+0 sec, QpcTime-WindowsUtcTime=-85 sec (*). [dpxxdisp.c 21913]

13.01.2015 14:35:56.034 PID=3664, TID=4196 SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime: -86300 millisec (max +0). Slept 1000 millisec, Qpc elapsed: +999 millisec, WindowsUtc elapsed +87299 millisec. SapTime-WindowsUtcTime=-85 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-85736 millisec (*).

Tue Jan 13 09:40:24 2015

13.01.2015 14:40:24.480 PID=3664, TID=4196 SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime: -87997 millisec (max -86300). Slept 1000 millisec, Qpc elapsed: +1000 millisec, WindowsUtc elapsed +88997 millisec. SapTime-WindowsUtcTime=-88 seconds. TotalTimeCorrection=+85786 millisec, QpcTime-WindowsUtcTime=-173903 millisec (*).

Tue Jan 13 09:51:17 2015

SoftCancel request for T30 U812 M0 received from IC_MAN

Tue Jan 13 09:56:48 2015

SoftCancel request for T37 U978 M0 received from IC_MAN

Tue Jan 13 09:57:59 2015

SoftCancel request for T37 U994 M0 received from IC_MAN

Tue Jan 13 10:19:25 2015

DpHdlDeadWp: W0 (pid=3736) terminated automatically

Tue Jan 13 10:45:23 2015

SoftCancel request for T33 U1231 M0 received from IC_MAN

Tue Jan 13 10:45:47 2015

DpHdlDeadWp: W0 (pid=6728) terminated automatically

Tue Jan 13 10:47:29 2015

*** WARNING => DpEnvCheck: no answer from msg server since 33 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]

Tue Jan 13 10:51:18 2015

*** ERROR => 13.01.2015 15:51:18.702 PID=3664, TID=4196 SapTimer warning. Took time keeping ownership. PID=3664, old owner PID:2268 [dpxxdisp.c 21913]

Tue Jan 13 10:52:29 2015

*** WARNING => DpEnvCheck: no answer from msg server since 33 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]

Tue Jan 13 10:52:50 2015

*** WARNING => DpEnvCheck: no answer from msg server since 54 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]

Tue Jan 13 10:53:11 2015

*** WARNING => DpEnvCheck: no answer from msg server since 75 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]

Tue Jan 13 10:53:32 2015

*** WARNING => DpEnvCheck: no answer from msg server since 96 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]

Tue Jan 13 11:10:33 2015

DpHdlDeadWp: W6 (pid=4084) terminated automatically

DpHdlDeadWp: W7 (pid=3220) terminated automatically

Tue Jan 13 11:49:36 2015

SoftCancel request for T33 U1879 M0 received from IC_MAN

Tue Jan 13 11:50:34 2015

DpHdlDeadWp: W2 (pid=4288) terminated automatically

Tue Jan 13 11:52:32 2015

*** ERROR => V3 already deleted [dpxxdisp.c 8106]

***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]

-IN-- sender_id DISPATCHER tid 33 wp_ca_blk 90 wp_id 0

-IN-- action SEND_TO_WP uid 2141 appc_ca_blk -1 type DIA

-IN-- new_stat NO_CHANGE mode 0 len 1108 rq_id 20595

-IN-- req_info LOGIN,MSG_WITH_REQ_BUF,MSG_WITH_OH

-IN-- vmcHdl 3 sesTab -1 vmcControlsCheckedCount 0

-IN-- msg_name SAPCRMDEV_CRD_00

Tue Jan 13 12:03:55 2015

DpHdlDeadWp: W3 (pid=4356) terminated automatically

Tue Jan 13 15:50:00 2015

SoftCancel request for T31 U2842 M0 received from IC_MAN

Tue Jan 13 15:58:03 2015

SoftCancel request for T27 U4211 M0 received from IC_MAN

SoftCancel request for T29 U4212 M0 received from IC_MAN

Tue Jan 13 17:39:04 2015

SoftCancel request for T37 U5251 M0 received from IC_MAN

SoftCancel request for T23 U5252 M0 received from IC_MAN

Tue Jan 13 17:41:53 2015

SoftCancel request for T31 U5306 M0 received from IC_MAN

SoftCancel request for T22 U5307 M0 received from IC_MAN

Tue Jan 13 20:47:22 2015

DpHdlDeadWp: W7 (pid=6344) terminated automatically

Tue Jan 13 20:58:21 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:65029: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 25/sock 968

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:65029) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Tue Jan 13 20:58:21 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 8744

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

Tue Jan 13 20:58:26 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Tue Jan 13 20:58:38 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Tue Jan 13 20:59:03 2015

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

Tue Jan 13 20:59:11 2015

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

MBUF component UP

DpMsgProcess: 1 server in MBUF

Tue Jan 13 21:00:43 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:49645: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 20/sock 984

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:49645) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Tue Jan 13 21:00:43 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 8761

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

Tue Jan 13 21:00:48 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Tue Jan 13 21:00:54 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Tue Jan 13 21:01:09 2015

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

Tue Jan 13 21:01:12 2015

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

Tue Jan 13 21:01:26 2015

MBUF state ACTIVE

MBUF component UP

DpMsgProcess: 1 server in MBUF

***LOG Q0I=> NiIRead: P=127.0.0.1:49717; L=127.0.0.1:3200: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 27/sock 968

(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:49717; L=127.0.0.1:3200) [nixxi.cpp 5082]

DpMsgProcess: 1 server in MBUF

Tue Jan 13 21:32:09 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:49716: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 23/sock 1340

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:49716) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Tue Jan 13 21:32:09 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 9088

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

Tue Jan 13 21:32:14 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

*** ERROR => MsISnd2: not_attached [msxxi.c 1510]

***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 5590]

Tue Jan 13 21:32:17 2015

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

MBUF state LOADING

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

MBUF component UP

DpMsgProcess: 1 server in MBUF

Tue Jan 13 22:41:28 2015

***LOG Q0I=> NiIRead: P=127.0.0.1:52332; L=127.0.0.1:3200: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 67/sock 944

(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:52332; L=127.0.0.1:3200) [nixxi.cpp 5082]

Tue Jan 13 22:41:42 2015

SoftCancel request for T42 U8108 M0 received from IC_MAN

Tue Jan 13 22:41:59 2015

SoftCancel request for T32 U8113 M0 received from IC_MAN

SoftCancel request for T22 U8114 M0 received from IC_MAN

Tue Jan 13 22:42:09 2015

SoftCancel request for T26 U8115 M0 received from IC_MAN

Tue Jan 13 22:43:05 2015

DpHdlDeadWp: W0 (pid=5292) terminated automatically

DpHdlDeadWp: W3 (pid=4252) terminated automatically

DpHdlDeadWp: W4 (pid=1528) terminated automatically

Tue Jan 13 22:54:19 2015

SoftCancel request for T22 U8171 M0 received from IC_MAN

Tue Jan 13 22:55:05 2015

DpHdlDeadWp: W6 (pid=6644) terminated automatically

Tue Jan 13 23:10:45 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:50690: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 17/sock 1000

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:50690) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Tue Jan 13 23:10:45 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 10145

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

Tue Jan 13 23:10:50 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Tue Jan 13 23:10:56 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Tue Jan 13 23:11:20 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Tue Jan 13 23:11:35 2015

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

Tue Jan 13 23:11:42 2015

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

MBUF component UP

DpMsgProcess: 1 server in MBUF

Tue Jan 13 23:59:59 2015

SoftCancel request for T31 U8648 M0 received from IC_MAN

Wed Jan 14 00:00:00 2015

SoftCancel request for T28 U8649 M0 received from IC_MAN

Wed Jan 14 00:00:04 2015

DpRqCheck: mode 0 in status CANCEL

SoftCancel request for T31 U8648 M0 received from IC_MAN

*** ERROR => DpRqCheck: T31 in state TM_SLOT_FREE [dpxxdisp.c 8135]

***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]

-IN-- sender_id DISPATCHER tid 31 wp_ca_blk -1 wp_id -1

-IN-- action SEND_TO_WP uid 8648 appc_ca_blk -1 type DIA

-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 12995

-IN-- prio HIGH

-IN-- req_info DP_SOFT_CANCEL

-IN-- msg_name -

Wed Jan 14 00:00:31 2015

***LOG Q0I=> NiIRead: P=192.168.101.90:2900; L=192.168.101.63:3200: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 32/sock 988

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.90:2900; L=192.168.101.63:3200) [nixxi.cpp 5082]

DpRTmPrepareReq: network error of client T25, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3

Wed Jan 14 00:00:40 2015

*** WARNING => DpAddrToHost: NiAddrToHost took 8422 ms [dpxxdisp.c 20855]

*** WARNING => DpAddrToHost: Disabling reverse name lookup [dpxxdisp.c 20856]

DpRTmPrepareReq: client address of T25 is 192.168.101.90(TERMSRVCRESTRON)

***LOG Q04=> DpRTmPrep, NiBufReceive (5728 SRASTOGI 25 TermSrvCrest) [dpxxdisp.c 12573]

RM-T25, U5728, 100 SRASTOGI, TermSrvCrestron, 23:59:55, M0, W5, SE16, 2/2

***LOG Q0I=> NiIRead: P=192.168.101.90:4082; L=192.168.101.63:3200: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 90/sock 944

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.90:4082; L=192.168.101.63:3200) [nixxi.cpp 5082]

***LOG Q0I=> NiIRead: P=192.168.101.90:4068; L=192.168.101.63:3200: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 66/sock 1308

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.90:4068; L=192.168.101.63:3200) [nixxi.cpp 5082]

***LOG Q0I=> NiIRead: P=192.168.101.90:4061; L=192.168.101.63:3200: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 30/sock 984

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.90:4061; L=192.168.101.63:3200) [nixxi.cpp 5082]

DpRTmPrepareReq: network error of client T34, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3

DpRTmPrepareReq: client address of T34 is 192.168.101.90(192.168.101.90)

***LOG Q04=> DpRTmPrep, NiBufReceive (8644 34 TermSrvCrest) [dpxxdisp.c 12573]

RM-T34, U8644, 000 , TermSrvCrestron, 23:59:53, M0, W8, SESS, 2/0

DpRTmPrepareReq: network error of client T23, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3

DpRTmPrepareReq: client address of T23 is 192.168.101.90(192.168.101.90)

***LOG Q04=> DpRTmPrep, NiBufReceive (8646 23 TermSrvCrest) [dpxxdisp.c 12573]

RM-T23, U8646, 000 , TermSrvCrestron, 23:59:54, M0, W4, SESS, 2/0

DpRTmPrepareReq: network error of client T42, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3

DpRTmPrepareReq: client address of T42 is 192.168.101.90(192.168.101.90)

***LOG Q04=> DpRTmPrep, NiBufReceive (8647 42 TermSrvCrest) [dpxxdisp.c 12573]

RM-T42, U8647, 000 , TermSrvCrestron, 23:59:56, M0, W0, SESS, 2/0

Wed Jan 14 00:00:41 2015

DpHdlDeadWp: W1 (pid=4608) terminated automatically

Wed Jan 14 00:49:19 2015

*** WARNING => DpITimeCheck: suspicious forward jump of current time 1421214559, last time 1421211655 [dpxxdisp.c 9205]

Wed Jan 14 00:49:20 2015

DpITimeCheck: new time seems to be OK now, I accept 1421214560

*** WARNING => DpTimeCheck: huge diff between current 1421211676 and next schedule (act_time 1421214560 delay 120 [dpxxdisp.c 9379]

DpRqCheck: mode 0 in status CANCEL

*** WARNING => DpHdlSoftCancel: T28/M0 still active in W1 with state WP_NEW, can't deligate SOFT_CANCEL [dpxxdisp.c 18360]

Wed Jan 14 00:49:22 2015

SoftCancel request for T26 U8655 M0 received from REMOTE_TERMINAL

Wed Jan 14 01:08:41 2015

DpHdlDeadWp: W7 (pid=5988) terminated automatically

Wed Jan 14 01:15:12 2015

SoftCancel request for T42 U8862 M0 received from IC_MAN

SoftCancel request for T25 U8859 M0 received from IC_MAN

Wed Jan 14 01:15:30 2015

DpRqCheck: mode 0 in status CANCEL

SoftCancel request for T42 U8862 M0 received from IC_MAN

*** ERROR => DpRqCheck: T42 in state TM_SLOT_FREE [dpxxdisp.c 8135]

***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]

-IN-- sender_id DISPATCHER tid 42 wp_ca_blk -1 wp_id -1

-IN-- action SEND_TO_WP uid 8862 appc_ca_blk -1 type DIA

-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 21027

-IN-- prio HIGH

-IN-- req_info DP_SOFT_CANCEL

-IN-- msg_name -

***LOG Q0I=> NiIRead: P=127.0.0.1:55047; L=127.0.0.1:3200: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 86/sock 1304

(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:55047; L=127.0.0.1:3200) [nixxi.cpp 5082]

Wed Jan 14 01:15:35 2015

DpHdlSoftCancelTimeout: previous kill in wp 0 not yet handled, reschedule softcancel (level 2)

Wed Jan 14 01:15:40 2015

DpHdlSoftCancelTimeout: previous kill in wp 0 not yet handled, reschedule softcancel (level 2)

Wed Jan 14 01:15:45 2015

DpHdlSoftCancelTimeout: previous kill in wp 0 not yet handled, reschedule softcancel (level 2)

Wed Jan 14 01:15:50 2015

DpHdlSoftCancelTimeout: previous kill in wp 0 not yet handled, reschedule softcancel (level 2)

Wed Jan 14 01:16:00 2015

DpRqCheck: mode 0 in status CANCEL

SoftCancel request for T25 U8859 M0 received from IC_MAN

*** ERROR => DpRqCheck: T25 in state TM_SLOT_FREE [dpxxdisp.c 8135]

***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]

-IN-- sender_id DISPATCHER tid 25 wp_ca_blk -1 wp_id -1

-IN-- action SEND_TO_WP uid 8859 appc_ca_blk -1 type DIA

-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 21060

-IN-- prio HIGH

-IN-- req_info DP_SOFT_CANCEL

-IN-- msg_name -

Wed Jan 14 01:20:56 2015

SoftCancel request for T22 U8887 M0 received from IC_MAN

SoftCancel request for T35 U8885 M0 received from IC_MAN

Wed Jan 14 01:21:10 2015

DpHdlDeadWp: W1 (pid=5524) terminated automatically

Wed Jan 14 01:21:24 2015

DpHdlDeadWp: W8 (pid=564) terminated automatically

***LOG Q0I=> NiIRead: P=127.0.0.1:55171; L=127.0.0.1:3200: recv (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 102/sock 1016

(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:55171; L=127.0.0.1:3200) [nixxi.cpp 5082]

Wed Jan 14 01:22:16 2015

DpRqCheck: mode 0 in status CANCEL

*** WARNING => DpHdlSoftCancel: T35/M0 still active in W1 with state WP_NEW, can't deligate SOFT_CANCEL [dpxxdisp.c 18360]

Wed Jan 14 01:22:44 2015

DpRqCheck: mode 0 in status CANCEL

Wed Jan 14 01:22:49 2015

SoftCancel request for T22 U8887 M0 received from IC_MAN

*** ERROR => DpRqCheck: T22 in state TM_SLOT_FREE [dpxxdisp.c 8135]

***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 7176): [dpxxdisp.c 6266]

-IN-- sender_id DISPATCHER tid 22 wp_ca_blk -1 wp_id -1

-IN-- action SEND_TO_WP uid 8887 appc_ca_blk -1 type DIA

-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 21394

-IN-- prio HIGH

-IN-- req_info DP_SOFT_CANCEL

-IN-- msg_name -

Wed Jan 14 01:25:19 2015

SoftCancel request for T35 U8951 M0 received from IC_MAN

Wed Jan 14 01:25:20 2015

SoftCancel request for T22 U8954 M0 received from IC_MAN

Wed Jan 14 01:25:35 2015

DpRqCheck: mode 0 in status CANCEL

***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]

-IN-- sender_id IC_MAN tid 24 wp_ca_blk -1 wp_id -1

-IN-- action SEND_TO_WP uid 8823 appc_ca_blk -1 type NOWP

-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 21226

-IN-- req_info DP_ICM_EVENT

-IN-- mpi read <f9d> mpi write <f9e> prot 1 obj fd -1 rq_id 0

-IN-- icm_opcode: ICM_PLUGIN_REQUEST virt_host_idx: 0

-IN-- dtrace {root-id=00505682314E1EE4A6F674B291BD340B}_{conn-id=00505682314E1EE4A6F69543410C740B}_1

-IN-- msg_name -

Wed Jan 14 01:52:12 2015

DpHdlDeadWp: W7 (pid=6772) terminated automatically

Wed Jan 14 01:54:51 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:53037: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 22/sock 1324

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:53037) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Wed Jan 14 01:54:51 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 11354

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

Wed Jan 14 01:54:57 2015

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

Wed Jan 14 01:55:08 2015

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

MBUF component UP

DpMsgProcess: 1 server in MBUF

Wed Jan 14 02:07:58 2015

*** WARNING => DpTimeCheck: skipped 1 buffer refresh requests because one is in the queue [dpxxdisp.c 9397]

Wed Jan 14 02:12:07 2015

SoftCancel request for T26 U9125 M0 received from IC_MAN

Wed Jan 14 02:41:40 2015

DpHdlDeadWp: W7 (pid=7164) terminated automatically

Wed Jan 14 03:33:27 2015

DpHdlDeadWp: W7 (pid=3892) terminated automatically

Wed Jan 14 03:44:27 2015

DpHdlDeadWp: W4 (pid=6928) terminated automatically

Wed Jan 14 03:47:47 2015

*** WARNING => DpEnvCheck: no answer from msg server since 20 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]

Wed Jan 14 03:48:07 2015

*** WARNING => DpEnvCheck: no answer from msg server since 40 secs, but dp_ms_keepalive_timeout(300 secs) not reached [dpxxdisp.c 8538]

Wed Jan 14 03:48:25 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:55941: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 23/sock 1348

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:55941) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Wed Jan 14 03:48:25 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 12537

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

Wed Jan 14 03:48:30 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 03:48:40 2015

*** ERROR => MsISnd2: not_attached [msxxi.c 1510]

***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 5590]

Wed Jan 14 03:48:46 2015

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

Wed Jan 14 03:48:53 2015

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

MBUF component UP

DpMsgProcess: 1 server in MBUF

Wed Jan 14 03:49:15 2015

*** WARNING => DpHdlSoftCancel: T27/M0 still active in W4 with state WP_NEW, can't deligate SOFT_CANCEL [dpxxdisp.c 18360]

Wed Jan 14 03:51:40 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:58283: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 17/sock 984

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:58283) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Wed Jan 14 03:51:40 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 12564

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

SoftCancel request for T27 U10155 M0 received from IC_MAN

Wed Jan 14 03:51:45 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 03:52:20 2015

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

***LOG Q0I=> NiIWrite: P=127.0.0.1:58350; L=127.0.0.1:3200: WSASend (10053: WSAECONNABORTED: Software caused connection abort) [nixxi.cpp 4599]

*** ERROR => NiIWrite: SiSendV failed for hdl 33/sock 1348

(SI_ECONN_BROKEN/10053; I4; ST; P=127.0.0.1:58350; L=127.0.0.1:3200) [nixxi.cpp 4599]

*** ERROR => NiICheck: NiBufIWriteUserMsg failed (rc=-6) [nixxi.cpp 6096]

*** ERROR => NiBufIProcMsg: NiICheck failed (rc=-6) [nibuf.cpp 2027]

*** ERROR => NiBufIIn: NiBufIProcMsg failed (rc=-6) [nibuf.cpp 2951]

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

MBUF component UP

DpMsgProcess: 1 server in MBUF

Wed Jan 14 04:18:03 2015

DpHdlDeadWp: W8 (pid=6688) terminated automatically

Wed Jan 14 04:32:45 2015

SoftCancel request for T34 U10386 M0 received from IC_MAN

Wed Jan 14 04:39:05 2015

DpHdlDeadWp: W0 (pid=6904) terminated automatically

Wed Jan 14 04:56:46 2015

DpHdlDeadWp: W1 (pid=7028) terminated automatically

Wed Jan 14 05:01:47 2015

DpHdlDeadWp: W8 (pid=5276) terminated automatically

Wed Jan 14 05:18:06 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:58369: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 19/sock 984

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:58369) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Wed Jan 14 05:18:06 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 13511

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

Wed Jan 14 05:18:11 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 05:18:17 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 05:18:37 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 05:18:57 2015

***LOG Q0K=> DpMsAttach, mscon ( SAPCRMDEV) [dpxxdisp.c 12944]

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]

MBUF state ACTIVE

MBUF component UP

DpMsgProcess: 1 server in MBUF

Wed Jan 14 05:53:07 2015

DpHdlDeadWp: W8 (pid=6128) terminated automatically

Wed Jan 14 06:08:11 2015

DpRqCheck: mode 0 in status CANCEL

***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]

-IN-- sender_id IC_MAN tid 29 wp_ca_blk -1 wp_id -1

-IN-- action SEND_TO_WP uid 11175 appc_ca_blk -1 type NOWP

-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 45714

-IN-- req_info DP_ICM_EVENT

-IN-- mpi read <19e1> mpi write <19e2> prot 1 obj fd -1 rq_id 0

-IN-- icm_opcode: ICM_PLUGIN_REQUEST virt_host_idx: 0

-IN-- dtrace {root-id=00505682314E1EE4A6FB44610803940B}_{conn-id=00505682314E1EE4A6FB8DA63301940B}_1

-IN-- msg_name -

*** ERROR => DpRqCheck: T29 in state TM_SLOT_FREE [dpxxdisp.c 8135]

***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]

-IN-- sender_id DISPATCHER tid 29 wp_ca_blk 226 wp_id 3

-IN-- action SEND_TO_WP uid 11175 appc_ca_blk -1 type NOWP

-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 45832

-IN-- req_info CANCELMODE

-IN-- msg_name -

Wed Jan 14 06:12:28 2015

DpHdlDeadWp: W1 (pid=6508) terminated automatically

Wed Jan 14 06:32:38 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:60578: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

Wed Jan 14 06:32:39 2015

*** ERROR => NiIRead: SiRecv failed for hdl 23/sock 1344

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:60578) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR Reading data from the message server (SAPCRMDEV / 3900)

* failed.

* Please check the trace file of the message server.

*

* TIME Wed Jan 14 06:32:39 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -36

* MODULE msxxi.c

* LINE 2852

* COUNTER 14236

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

MBUF state OFF

MBUF component DOWN

*** ERROR => DpMsgProcess: MsReceive () -> MSENILAYER, partner: [dpxxdisp.c 2601]

*** ERROR => DpMsgProcess: disconnect from msg_server [dpxxdisp.c 2672]

Wed Jan 14 06:32:44 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 06:32:49 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 06:32:59 2015

*** ERROR => DpRqCheck: T38 in state TM_SLOT_FREE [dpxxdisp.c 8135]

***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]

-IN-- sender_id DISPATCHER tid 38 wp_ca_blk 272 wp_id 5

-IN-- action SEND_TO_WP uid 11318 appc_ca_blk -1 type NOWP

-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 48480

-IN-- req_info CANCELMODE

-IN-- msg_name -

*** ERROR => DpRqCheck: T38 in state TM_SLOT_FREE [dpxxdisp.c 8135]

***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 6264]

*** ERROR => DpRqBadHandle: BAD REQUEST - Reason: DpRqCheck failed (line 4231): [dpxxdisp.c 6266]

-IN-- sender_id DISPATCHER tid 38 wp_ca_blk 451 wp_id 5

-IN-- action SEND_TO_WP uid 11318 appc_ca_blk -1 type NOWP

-IN-- new_stat NO_CHANGE mode 0 len 8 rq_id 48482

-IN-- req_info CANCELMODE

-IN-- msg_name -

Wed Jan 14 06:33:04 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 06:33:25 2015

*** ERROR => MsISnd2: not_attached [msxxi.c 1510]

***LOG Q0N=> DpRqNoWpHandle, MsSnd2Type () [dpxxdisp.c 5557]

Wed Jan 14 06:33:30 2015

*** ERROR => MsIAttachEx: NiBufConnect to SAPCRMDEV/3900 failed (rc=NIECONN_PENDING) [msxxi.c 718]

Wed Jan 14 06:34:22 2015

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:62123: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 20/sock 1356

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:62123) [nixxi.cpp 5082]

***LOG Q0I=> NiIRead: P=192.168.101.63:3900; L=192.168.101.63:62123: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5082]

*** ERROR => NiIRead: SiRecv failed for hdl 20/sock 1356

(SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:62123) [nixxi.cpp 5082]

*** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2833]

*****************************************************************************

*

* LOCATION SAP-Dispatcher SAPCRMDEV_CRD_00 on host SAPCRMDEV

* ERROR The connection to the specified message server

* (SAPCRMDEV / 3900) failed. Please check the trace file

* of the message server. If a network filter has

* been activated (see message server parameters

* ms/acl_file_...) please check the configuration

*

* TIME Wed Jan 14 06:34:22 2015

* RELEASE 721

* COMPONENT MS (message handling interface, multithreaded)

* VERSION 4

* RC -35

* MODULE msxxi.c

* LINE 2861

* COUNTER 14239

*

*****************************************************************************

*** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1867]

***LOG Q1K=> MsIAttachEx: StoC check failed, Kernel not compatible with system (rc=-100) [msxxi.c 820]

*** ERROR => Kernel incompatible to already connected instances (see dev_ms for details) [dpxxdisp.c 12889]

DpHalt: shutdown server >SAPCRMDEV_CRD_00 < (normal)

DpHalt: stop work processes

Wed Jan 14 06:34:28 2015

SoftCancel request for T0 U1 M0 received from DISPATCHER

softCancel request for T22 U10574 M3 received from DISPATCHER

SoftCancel request for T39 U11246 M0 received from DISPATCHER

*** ERROR => DpHdlSoftCancel: terminal has token [dpxxdisp.c 18317]

RM-T22, U10574, 100 DKASHYAP, TermSrvCrestron, 06:32:50, M3, W1, SE24, 4/1

SoftCancel request for T35 U11340 M0 received from DISPATCHER

SoftCancel request for T15 U16 M0 received from DISPATCHER

Wed Jan 14 06:35:29 2015

*** ERROR => DpWpKill(5956, SIGUSR2): kill failed [dpxxtool.c 2792]

DpHalt: stop gateway

DpHalt: stop icman

DpHalt: terminate gui connections

DpHalt: wait for end of work processes

DpHalt: waiting for termination of work processes ...

Wed Jan 14 06:35:30 2015

DpHalt: waiting for termination of work processes ...

Wed Jan 14 06:35:31 2015

DpHalt: waiting for termination of work processes ...

Wed Jan 14 06:35:32 2015

DpHalt: waiting for termination of work processes ...

Wed Jan 14 06:35:33 2015

DpHalt: waiting for termination of work processes ...

Wed Jan 14 06:35:34 2015

pHalt: wait for end of gateway

*** ERROR => [DpProcDied] Process died (PID:880 HANDLE:948 rc:0x0) [dpnttool2.c 147]

DpHalt: wait for end of icman

*** ERROR => [DpProcDied] Process died (PID:4132 HANDLE:956 rc:0x0) [dpnttool2.c 147]

DpHalt: not attached to the message server

DpHalt: cleanup EM

Wed Jan 14 06:35:35 2015

***LOG Q05=> DpHalt, DPStop ( 3664) [dpxxdisp.c 11819]

Thanks,
Kavitha Rajan.

Reagan · ‎01-14-2015


[Thr 4916] Tue Jan 13 08:44:07 2015
[Thr 4916] *** ERROR => MsSClientHandle: C1 (SAPCRMDEV_CRD_00) send inv_name sapcrmdev_CRD_00 [msxxserv.c   6196]
[Thr 4916] ------------------------------------- dump of MSADM table ------------------------------------
[Thr 4916] # NR  ADDR    >server name                             < TYP STA FTNR    FIHDL REQLSTREPLST
[Thr 4916] ----------------------------------------------------------------------------------------------
[Thr 4916] #  0 bad0690 > SAPCRMDEV_CRD_00                           3 191    1   102080 (nil) (nil)
[Thr 4916] #  1 bad00d0 > -                                          3   0    0        0 (nil) (nil)
[Thr 4916] #entries = 2

The problem looks like the system is considering sapcrmdev_CRD_00 as another instance (If I've understood it correctly) and it is taking SAPCRMDEV_CRD_00 as the real instance which is weird. They both have the same system number and the only difference is that one is in upper case and the other is in lower case which shouldn't be a problem as this is a Windows server.

Check this KBA as it is addressing this issue.

1974139 - Message server disconnection error while system works fine.

Go to the profile directory and keep only the correct profiles there and move the old profiles (if any) to a differnt location.

Call Tx RZ10 and delete the profiles there (IMPORTANT: DO NOT confirm deletion of profiles at the OS level) and import the profiles from the OS level.

Check Tx RZ04 and check whether the instance profile is correct there.

Restart SAP and check the trace files.

Cheers

RB

former_member182657 · ‎01-23-2015

Oh Great to know your issue has been resolved now !!

Nice experience for me also.

Regards,

Gaurav

Matt_Fraser · ‎01-14-2015

Have you confirmed that the same 721_EXT patch 400 kernel is being used for the message server and the dispatcher instance? The error seems to be complaining about a kernel mismatch between components.

I think the dispatcher is crashing because it's losing its connection to the message server. So, probably the message server is the first piece to troubleshoot.

Regards,

Matt

former_member182657 · ‎01-14-2015

Hi,


*** ERROR => NiIRead: SiRecv failed for hdl 17/sock 984


    (SI_ECONN_BROKEN/10054; I4; ST; P=192.168.101.63:3900; L=192.168.101.63:58283) [nixxi.cpp    5082]

Issue seems with network connections at your end,kindly refer SAP Notes 1478133 - MS SQL Server: How to analyze connection problems to database server

413330 - Network timeouts

Also check for port entry of 3900 under services.If possible share trans.log by executing R3trans -d

Regards,

Gaurav

After Upgrade kernel not compatible with system (rc=-100)

Accepted Solutions (1)

Accepted Solutions (1)

Answers (3)

Answers (3)

Re: "Failed to update setup engine executables. Pr...

Re: Timer showing while sending the mails from SAP

Re: Best practice to connect to multiple databases...

SAP Hana Calculation view input parameter from JPA...

Re: Adaptation error in sap mdg ui screen customer