Ehp7 stuck in MAIN_SHDRUN/ACT_UPG

[Former Member]

Dear Team,

I am implementing Ehp7 in my server .During Implementing Its Stuck in below screen from last 40 Hours.

Then I again Stop and Start from SUM..

I have check all File system and Table System size , Its has sufficient space,But nothing is imporoving .When I login in Shadow System.

and check all process , In this one background process is cont..running

I have check these log ,But in this nothing growing......

-rw-rw-r--   1 qasadm     sapsys        4149 Jan 19 13:00 SAPA-606BMINISM.QAS

-rw-rw-r--   1 qasadm     sapsys     133984487 Jan 19 13:00 SAPA741EPU.QAS

-rw-rw-r--   1 qasadm     sapsys     1348925 Jan 19 13:00 ACTUPG.SAV

-rw-rw-r--   1 qasadm     sapsys       27575 Jan 19 13:00 SAPupStat.log

-rw-rw-r--   1 qasadm     sapsys      228761 Jan 19 13:00 SAPup.log

-rw-rw-r--   1 qasadm     sapsys     1774750 Jan 19 13:00 PHASES.SAV

-rw-rw-r--   1 qasadm     sapsys        1718 Jan 19 13:00 TP.ECO

-rw-rw-r--   1 qasadm     sapsys      972216 Jan 19 13:00 ULOG15_1

-rw-rw-r--   1 qasadm     sapsys     32415264 Jan 19 13:00 TP.SAV

-rw-rw-r--   1 qasadm     sapsys        1617 Jan 19 13:00 PHASES.LOG

-rw-rw-r--   1 qasadm     sapsys      677008 Jan 19 13:00 SAPupConsole.log

-rw-rw-r--   1 qasadm     sapsys      982019 Jan 19 13:00 SAPup.ECO

-rw-rw-r--   1 qasadm     sapsys      549971 Jan 19 13:00 SLOG740

-rw-rw-r--   1 qasadm     sapsys     1130611 Jan 19 13:00 ALOG740

sapqas:/usr/sap/trans/ehp7/SUM/abap/log>

Regards

[Reagan · Accepted solution]

Check the logs under /usr/sap/trans/ehp7/SUM/abap/tmp and see if they are getting updated.

Connect to the shadow instance and call Tx SM37 and check whether the background job is running. Do a "Check Status" if the job is in active state. If the job gets terminated then this could be reason.

[Former Member · Accepted solution]

Dear Reagan,

I have check log in /usr/sap/trans/ehp7/SUM/abap/tmp/

-rw-r--r--   1 qasadm     sapsys     1023177 Jan  8 11:39 cepoxqub.sta

-rw-rw-r--   1 qasadm     sapsys       47328 Jan  8 15:03 trans.log

-rw-rw-r--   1 qasadm     sapsys           0 Jan 10 14:07 dev_hwid

-rw-r--r--   1 qasadm     sapsys        2198 Jan 10 14:07 dev_likey

-rw-rw-r--   1 qasadm     sapsys        3493 Jan 10 14:08 R3trans.out

-rw-rw-r--   1 qasadm     sapsys        4554 Jan 10 14:30 rfc27410_00001.trc

-rw-rw-r--   1 qasadm     sapsys         621 Jan 16 21:13 dev_evt

-rw-rw----   1 qasadm     sapsys      299383 Jan 19 22:04 SAPA741EPU.QAS

sapqas:/usr/sap/trans/ehp7/SUM/abap/tmp>

Last few line of  SAPA741EPU.QAS

2 ED0313 sapqas_QAS_01.......|....2|....2|.....|.......0|......14|.....0|.......9|.....0

2 EDO678 Parallel execution: "0" sec., Phase out time: "0" sec., Load: "1,0000000000000000E+02" percent

1 EDO533X*** Activate objects at level "981"

3 EDO639 Too low cost ("5.480") for parallel processing. Minimum: "6.000"

3 EDO634 * Synchronous execution, no parallel processing *

3 EDO680XSynchronous processing: "0" sec., "7" objects, "5.480" costs

1 EDO533X*** Activate objects at level "982"

3 EDO639 Too low cost ("1.080") for parallel processing. Minimum: "6.000"

3 EDO634 * Synchronous execution, no parallel processing *

3 EDO680XSynchronous processing: "0" sec., "2" objects, "1.080" costs

sapqas:/usr/sap/trans/ehp7/SUM/abap/tmp>

But their is no any background job is running in Shadow System .

Regards

[Reagan · Accepted solution]

Hello Pooja

What is the target SP stack level (SAP_BASIS) for the system you are updating to?

Check these SAP notes as there is an issue with the phase ACT_UPG addressed in those notes when updating the system to SAP_BASIS 7.40 SP8/SP9

2089841 - Performance improvements for ABAP Dictionary activation

2105466 - Performance problem during ACT_UPG or ACT_TRANS during update to SAP_BASIS 7.40 SP8 or SP9

Cheers

RB

[tomas_black · Accepted solution]

Hello Pooja,

1) goto shadow instance

2) run t-code SM37

3) look for the last active (or cancelled) job RDDMASGL

4) check its details (button named "Job Details"

5) find the work process it is/was using on the corresponding server

6) goto ST11 (or to the work folder on the OS level) and find the corresponding dev_w* trace file

7) you should be able to find the root cause of the error and/or hanging situation. Then check for SAP notes for corrections - or update this thread

Regards,

Tomas Black

[divyanshu_srivastava3]

Hi Pooja,

In this one background process is cont..runnin

Have you checked the job logs ?

Can you share the logs for this stage ?

Regards,

[Former Member]

Dear Divyanshu,

I have check via SM37 , no any process is active , But when I check via SM50 , Its showing one background  process is running.

Regards

[divyanshu_srivastava3]

When you double click what all do you see ?

Also check for dumps or failed/competed jobs.

Plus refer -

2105466 - Performance problem during ACT_UPG or ACT_TRANS during update to SAP_BASIS 7.40 SP8 or SP9

1918279 - performance analysis for ACT_UPG phase