on 02-18-2015 3:33 PM
Dear SAP Gurus,
I have installed SAP ECC IDES System on Windows Server 2008R2 with MaxDB about 6 months ago.
Yesterday I wanted to use it again, but the process disp+work.exe is stopped after it is started for some seconds.
I really appreciate any helps.
Thanks.
following is the content of dev_w0
---------------------------------------------------
trc file: "dev_w0", trc level: 1, release: "701"
---------------------------------------------------
*
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
*
B
B Wed Feb 18 16:09:59 2015
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\ECC\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'E:\usr\sap\ECC\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'E:\usr\sap\ECC\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.24)
B New connection 0 created
M sysno 00
M sid ECC
M systemid 562 (PC with Windows NT)
M relno 7010
M patchlevel 0
M patchno 32
M intno 20020600
M make: multithreaded, Unicode, 64 bit, optimized
M pid 2696
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2696) [dpxxdisp.c 1348]
I
I Wed Feb 18 16:10:00 2015
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D9C0050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000D9C0050
M DpShMCreate: allocated wp_adm at 000000000D9C2270
M DpShMCreate: allocated tm_adm_list at 000000000D9C96D0
M DpShMCreate: allocated tm_adm at 000000000D9C9730
M DpShMCreate: allocated wp_ca_adm at 000000000DF6CFB0
M DpShMCreate: allocated appc_ca_adm at 000000000DF72DB0
M DpShMCreate: allocated comm_adm at 000000000DF74CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000DFFB980
M DpShMCreate: allocated gw_adm at 000000000DFFBA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000DFFBA30
M DpShMCreate: allocated wall_adm at 000000000DFFBA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Feb 18 16:10:01 2015
M ThInit: running on host ibsserver75
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.024) Default value for max. input variables is 2000 (note 655018)
C (0.024) Profile parameter to define max. input variables (note 655018)
C (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.024) Input parameters for SQL statements increased (note 655018)
C (0.018) Create index serial for MaxDB 7.6 (note 1267841)
C (0.018) More trace in case of packed to string conversion error (note 1262799)
C (0.016) R3trans export aborts with signal 6 (note 1262245)
C (0.009) IA64 alignment errors (note 1245982)
C (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
C SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.7.06 Build 010-123-204-327
C Database release is SAP DB 7.7.06.010
C INFO : Database 'ECC' instance is running on 'ibsserver75'
C DB max. input host variables : 2000
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPECC'
C *** ERROR => the connected user (SAPECC) does not work with the right user/schema
[dbslsdb.cpp 4818]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 4820]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
M Info for wp 0
M
M pid = 2696
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ibsserver75_ECC_00 on host ibsserver75 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Feb 18 16:10:01 2015
M * RELEASE 701
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10783
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 723]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2696) [dpnttool.c 334]
Following is the content of the profile
E:\usr\sap\ECC\SYS\profile\ECC_DVEBMGS00_ibsserver75
SAPSYSTEMNAME = ECC
SAPGLOBALHOST = ibsserver75
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
rdisp/wp_no_dia = 10
rdisp/wp_no_btc = 3
icm/server_port_0 = PROT=HTTP,PORT=80$$
#-----------------------------------------------------------------------
# SAP Message Server parameters are set in the DEFAULT.PFL
#-----------------------------------------------------------------------
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
rsdb/dbid = ECC
dbs/ada/schema = SAPECC
Following is the content of the profile
E:\usr\sap\ECC\SYS\profile\Default.pfl
SAPDBHOST = ibsserver75
j2ee/dbtype = sap
j2ee/dbname = ECC
j2ee/dbhost = ibsserver75
j2ee/dbadminurl = http://ibsserver75:9999/webdbm?Server=ibsserver75&Database=ECC&User=control
SAPSYSTEMNAME = ECC
SAPGLOBALHOST = ibsserver75
rdisp/bufrefmode = sendoff,exeauto
#-----------------------------------------------------------------------
# SAP Message Server for ABAP
#-----------------------------------------------------------------------
rdisp/mshost = ibsserver75
rdisp/msserv = sapmsECC
rdisp/msserv_internal = 3900
#-----------------------------------------------------------------------
# SAP Message Server for ABAP
#-----------------------------------------------------------------------
login/system_client = 001
Following is the content of the profile
E:\usr\sap\ECC\SYS\profile\START_DVEBMGS00_ibsserver75
SAPSYSTEMNAME = ECC
SAPGLOBALHOST = ibsserver75
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
DIR_PROFILE = $(DIR_INSTALL)\profile
_PF = $(DIR_PROFILE)\ECC_DVEBMGS00_ibsserver75
#-----------------------------------------------------------------------
# Copy SAP Executables
#-----------------------------------------------------------------------
Start_Program_00 = immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)
#-----------------------------------------------------------------------
# Start ABAP database
#-----------------------------------------------------------------------
_DB = $(DIR_CT_RUN)\strdbs.cmd
Start_Program_01 = immediate $(_DB) ECC
#-----------------------------------------------------------------------
# Start SAP message server
#-----------------------------------------------------------------------
_MS = $(DIR_EXECUTABLE)\msg_server$(FT_EXE)
Start_Program_02 = local $(_MS) pf=$(_PF)
#-----------------------------------------------------------------------
# Start application server
#-----------------------------------------------------------------------
_DW = $(DIR_EXECUTABLE)\disp+work$(FT_EXE)
Start_Program_03 = local $(_DW) pf=$(_PF)
#-----------------------------------------------------------------------
# Start internet graphics server
#-----------------------------------------------------------------------
_IG = $(DIR_EXECUTABLE)\igswd$(FT_EXE)
Start_Program_04 = local $(_IG) -mode=profile pf=$(_PF)
rsdb/dbid = ECC
dbs/ada/schema = SAPECC
I have tried to change the dbs/ada/schema in both profile files to SAPR3 but nothing changed in the log file.
Hi,
The line from SAP Note 39439 should work
xuser -U DEFAULT -u SAPR3,<password> -d <database_name> -n <database_server> -S SAPR3 -t 0 -I 0 set
Please corret the entry and try R3trans -d.
Regards,
Nikhil
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
-----------------------------------------------------------------
XUSER Entry 1
--------------
Key :DEFAULT
Username :SAPR3
UsernameUCS2:S.A.P.R.3. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :ECC
Nodename :ibsserver75
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
-----------------------------------------------------------------
still error....
C:\Users\eccadm>r3trans -d
This is r3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAM
E = ''"
r3trans finished (0012).
BTW, in the r3trans the parameter DBNAME = "" <-- is this correct ?
4 ETW000 r3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 06.03.2015 - 12:19:12
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Mar 06 12:19:15 2015 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbsdbslib.dll), hdl 0, addr 0000000186C80000
4 ETW000 1298 0.001298
4 ETW000 [dev trc ,00000] using "E:\usr\sap\ECC\SYS\exe\uc\NTAMD64\dbsdbslib.dll"
4 ETW000 26 0.001324
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 20 0.001344
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll
4 ETW000 50 0.001394
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.24)
4 ETW000 123 0.001517
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll
4 ETW000 27 0.001544
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll
4 ETW000 34 0.001578
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.001624
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000)
4 ETW000 29 0.001653
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 23 0.001676
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=000000000202F950)
4 ETW000 28 0.001704
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.001721
4 ETW000 [dev trc ,00000] New connection 0 created 19 0.001740
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.001779
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000141461DE8)
4 ETW000 103 0.001882
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 20 0.001902
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 19 0.001921
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 23 0.001944
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.001994
4 ETW000 [dev trc ,00000] { DbSlSdbConnect(con_info_p=0000000000000000) 37 0.002031
4 ETW000 [dev trc ,00000] DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
4 ETW000 106 0.002137
4 ETW000 [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10)
4 ETW000 55 0.002192
4 ETW000 [dev trc ,00000] (0.024) Default value for max. input variables is 2000 (note 655018)
4 ETW000 51 0.002243
4 ETW000 [dev trc ,00000] (0.024) Profile parameter to define max. input variables (note 655018)
4 ETW000 46 0.002289
4 ETW000 [dev trc ,00000] (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
4 ETW000 46 0.002335
4 ETW000 [dev trc ,00000] (0.024) Input parameters for SQL statements increased (note 655018)
4 ETW000 49 0.002384
4 ETW000 [dev trc ,00000] (0.018) Create index serial for MaxDB 7.6 (note 1267841)
4 ETW000 115 0.002499
4 ETW000 [dev trc ,00000] (0.018) More trace in case of packed to string conversion error (note 1262799)
4 ETW000 29 0.002528
4 ETW000 [dev trc ,00000] (0.016) R3trans export aborts with signal 6 (note 1262245)
4 ETW000 26 0.002554
4 ETW000 [dev trc ,00000] (0.009) IA64 alignment errors (note 1245982) 20 0.002574
4 ETW000 [dev trc ,00000] (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
4 ETW000 26 0.002600
4 ETW000 [dev trc ,00000] 21 0.002621
4 ETW000 [dev trc ,00000] -> init() 22 0.002643
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=24) : 0000000003C386A0 (40 bytes allocated)
4 ETW000 47 0.002690
4 ETW000 [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 95 0.002785
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=152000) : 0000000003ABAF40 (152056 bytes allocated)
4 ETW000 70 0.002855
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=656000) : 0000000003AE0120 (808072 bytes allocated)
4 ETW000 61 0.002916
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=288000) : 0000000008560080 (1096088 bytes allocated)
4 ETW000 60 0.002976
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16144) : 0000000003B803C0 (1112248 bytes allocated)
4 ETW000 62 0.003038
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=32048) : 0000000003B842F0 (1144312 bytes allocated)
4 ETW000 35 0.003073
4 ETW000 [dev trc ,00000] -> loadClientRuntime() 1630 0.004703
4 ETW000 [dev trc ,00000] Loading SQLDBC client runtime ... 30 0.004733
4 ETW000 [dev trc ,00000] SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
4 ETW000 882 0.005615
4 ETW000 [dev trc ,00000] SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
4 ETW000 28 0.005643
4 ETW000 [dev trc ,00000] SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
4 ETW000 72 0.005715
4 ETW000 [dev trc ,00000] SQLDBC supports new DECIMAL interface : 0 28 0.005743
4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE INPUT data : 1 19 0.005762
4 ETW000 [dev trc ,00000] SQLDBC supports keepAlive indicator : 0 19 0.005781
4 ETW000 [dev trc ,00000] -> getNewConnection() 17 0.005798
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1672) : 00000000085A6700 (1146000 bytes allocated)
4 ETW000 133 0.005931
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=608) : 00000000085A6DA0 (1146624 bytes allocated)
4 ETW000 104 0.006035
4 ETW000 [dev trc ,00000] <- getNewConnection(con_hdl=0) 84 0.006119
4 ETW000 [dev trc ,00000] -> checkEnvironment(con_hdl=0) 47 0.006166
4 ETW000 [dev trc ,00000] -> connect() 40 0.006206
4 ETW000 [dev trc ,00000] INFO : SQLOPT= -I 0 -t 0 -S SAPR3 83 0.006289
4 ETW000 [dev trc ,00000] Try to connect (DEFAULT) on connection 0 ... 104 0.006393
4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:[1] could not create comm. shared memory [5]))
4 ETW000 148109 0.154502
4 ETW000 [dev trc ,00000] -> SetSapdbCA(errcode=-10709) 26 0.154528
4 ETW000 [dev trc ,00000] -> freeConnection(con_hdl=0) 25 0.154553
4 ETW000 [dev trc ,00000] -> sdb_free(p=00000000085A6DA0, size=608 (1146000 bytes allocated))
4 ETW000 58 0.154611
4 ETW000 [dev trc ,00000] -> sdb_free(p=00000000085A6700, size=1672 (1144312 bytes allocated))
4 ETW000 54 0.154665
4 ETW000 [dev trc ,00000] } DbSlSdbConnect(rc=99) 21 0.154686
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error -10709 performing CON [dblink#3 @ 431]
4 ETW000 58 0.154744
4 ETW000 [dblink ,00431] ***LOG BY0=>Connection failed (RTE:[1] could not create comm. shared memory [5]) [dblink#3 @ 431]
4 ETW000 34 0.154778
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=41,arg_p=0000000140519908)
4 ETW000 98 0.154876
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 25 0.154901
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=14,arg_p=0000000002025EF0)
4 ETW000 28 0.154929
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.154946
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=50,arg_p=0000000002025FB0)
4 ETW000 27 0.154973
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 26 0.154999
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=13,arg_p=0000000002025F00)
4 ETW000 27 0.155026
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.155043
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=52,arg_p=0000000002025F50)
4 ETW000 52 0.155095
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 18 0.155113
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003C386A0, size=24 (1144272 bytes allocated))
4 ETW000 1765 0.156878
Hi,
Is the issue fixed?
From the trans.log file it seems to be shared memory issue.
Could you try the below steps:
- Stop compelte system including sap and dbmsrv process.
- rename the dbm.shi and dbm.shm file to old whcih would be present in run directory of maxdb.
- try starting db and try R3trans -d
Regards,
Nikhil
hi,
unfortunately not
Still doesnt work. here is the trans.log:
4 ETW000 r3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.03.2015 - 07:38:00
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Mar 10 07:38:03 2015 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] load shared library (dbsdbslib.dll), hdl 0, addr 0000000186C80000
4 ETW000 1245 0.001245
4 ETW000 [dev trc ,00000] using "E:\usr\sap\ECC\SYS\exe\uc\NTAMD64\dbsdbslib.dll"
4 ETW000 26 0.001271
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 20 0.001291
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll
4 ETW000 43 0.001334
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.24)
4 ETW000 95 0.001429
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll
4 ETW000 26 0.001455
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll
4 ETW000 30 0.001485
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 44 0.001529
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000)
4 ETW000 28 0.001557
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 23 0.001580
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=000000000202F950)
4 ETW000 28 0.001608
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.001625
4 ETW000 [dev trc ,00000] New connection 0 created 19 0.001644
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.001684
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000141461DE8)
4 ETW000 41 0.001725
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 18 0.001743
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 18 0.001761
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 23 0.001784
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 48 0.001832
4 ETW000 [dev trc ,00000] { DbSlSdbConnect(con_info_p=0000000000000000) 38 0.001870
4 ETW000 [dev trc ,00000] DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
4 ETW000 92 0.001962
4 ETW000 [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10)
4 ETW000 33 0.001995
4 ETW000 [dev trc ,00000] (0.024) Default value for max. input variables is 2000 (note 655018)
4 ETW000 31 0.002026
4 ETW000 [dev trc ,00000] (0.024) Profile parameter to define max. input variables (note 655018)
4 ETW000 28 0.002054
4 ETW000 [dev trc ,00000] (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
4 ETW000 26 0.002080
4 ETW000 [dev trc ,00000] (0.024) Input parameters for SQL statements increased (note 655018)
4 ETW000 27 0.002107
4 ETW000 [dev trc ,00000] (0.018) Create index serial for MaxDB 7.6 (note 1267841)
4 ETW000 26 0.002133
4 ETW000 [dev trc ,00000] (0.018) More trace in case of packed to string conversion error (note 1262799)
4 ETW000 28 0.002161
4 ETW000 [dev trc ,00000] (0.016) R3trans export aborts with signal 6 (note 1262245)
4 ETW000 27 0.002188
4 ETW000 [dev trc ,00000] (0.009) IA64 alignment errors (note 1245982) 19 0.002207
4 ETW000 [dev trc ,00000] (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
4 ETW000 26 0.002233
4 ETW000 [dev trc ,00000] 16 0.002249
4 ETW000 [dev trc ,00000] -> init() 22 0.002271
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=24) : 0000000003BE86A0 (40 bytes allocated)
4 ETW000 46 0.002317
4 ETW000 [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 88 0.002405
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=152000) : 0000000003C0AF40 (152056 bytes allocated)
4 ETW000 45 0.002450
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=656000) : 0000000003C30120 (808072 bytes allocated)
4 ETW000 35 0.002485
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=288000) : 0000000008620080 (1096088 bytes allocated)
4 ETW000 41 0.002526
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16144) : 0000000003CD03C0 (1112248 bytes allocated)
4 ETW000 34 0.002560
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=32048) : 0000000003CD42F0 (1144312 bytes allocated)
4 ETW000 34 0.002594
4 ETW000 [dev trc ,00000] -> loadClientRuntime() 831 0.003425
4 ETW000 [dev trc ,00000] Loading SQLDBC client runtime ... 31 0.003456
4 ETW000 [dev trc ,00000] SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
4 ETW000 662 0.004118
4 ETW000 [dev trc ,00000] SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
4 ETW000 28 0.004146
4 ETW000 [dev trc ,00000] SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
4 ETW000 53 0.004199
4 ETW000 [dev trc ,00000] SQLDBC supports new DECIMAL interface : 0 27 0.004226
4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE INPUT data : 1 20 0.004246
4 ETW000 [dev trc ,00000] SQLDBC supports keepAlive indicator : 0 19 0.004265
4 ETW000 [dev trc ,00000] -> getNewConnection() 18 0.004283
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1672) : 0000000008666700 (1146000 bytes allocated)
4 ETW000 43 0.004326
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=608) : 0000000008666DA0 (1146624 bytes allocated)
4 ETW000 67 0.004393
4 ETW000 [dev trc ,00000] <- getNewConnection(con_hdl=0) 83 0.004476
4 ETW000 [dev trc ,00000] -> checkEnvironment(con_hdl=0) 34 0.004510
4 ETW000 [dev trc ,00000] -> connect() 27 0.004537
4 ETW000 [dev trc ,00000] INFO : SQLOPT= -I 0 -t 0 -S SAPR3 54 0.004591
4 ETW000 [dev trc ,00000] Try to connect (DEFAULT) on connection 0 ... 73 0.004664
4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:[1] could not create comm. shared memory [5]))
4 ETW000 125959 0.130623
4 ETW000 [dev trc ,00000] -> SetSapdbCA(errcode=-10709) 26 0.130649
4 ETW000 [dev trc ,00000] -> freeConnection(con_hdl=0) 25 0.130674
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000008666DA0, size=608 (1146000 bytes allocated))
4 ETW000 58 0.130732
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000008666700, size=1672 (1144312 bytes allocated))
4 ETW000 52 0.130784
4 ETW000 [dev trc ,00000] } DbSlSdbConnect(rc=99) 22 0.130806
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error -10709 performing CON [dblink#3 @ 431]
4 ETW000 59 0.130865
4 ETW000 [dblink ,00431] ***LOG BY0=>Connection failed (RTE:[1] could not create comm. shared memory [5]) [dblink#3 @ 431]
4 ETW000 34 0.130899
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=41,arg_p=0000000140519908)
4 ETW000 49 0.130948
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 23 0.130971
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=14,arg_p=0000000002025EF0)
4 ETW000 27 0.130998
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.131015
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=50,arg_p=0000000002025FB0)
4 ETW000 28 0.131043
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 24 0.131067
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=13,arg_p=0000000002025F00)
4 ETW000 27 0.131094
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 18 0.131112
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=52,arg_p=0000000002025F50)
4 ETW000 33 0.131145
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 18 0.131163
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000003BE86A0, size=24 (1144272 bytes allocated))
4 ETW000 1980 0.133143
Hi Donny,
trans.log shows the below error message related to shared memory
4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:[1] could not create comm. shared memory [5]))
Try following the below steps
- Stop complete system including sap and dbmsrv process.
- rename the dbm.shi and dbm.shm file to old which would be present in run directory of maxdb server.
- try starting db first and check R3trans -d again.
- If R3trans is successful, start the applications.
Regards,
Nikhil
Hi,
Sorry that I missed the DB is MaxDB
I guess the issue might be with the xuser entries.
Check them using command xuser list and correct the entries for user SAPR3 which normally comed under DEFAULT.
Refer the below notes for details:
39439 - XUSER entries for SAP MaxDB
1409913 - Windows: Access to XUser data is not possible
Regards,
Nikhil
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
I guess my entry is already correct:
-----------------------------------------------------------------
XUSER Entry 1
--------------
Key :DEFAULT
Username :SAPECC
UsernameUCS2:S.A.P.E.C.C. . . . . . . . . . . . . . . . . . . . . . . . . . .
Password :?????????
PasswordUCS2:?????????
Dbname :ECC
Nodename :ibsserver75
Sqlmode :SAPR3
Cachelimit :-1
Timeout
Isolation
Charset :<unspecified>
-----------------------------------------------------------------
I can't find any SAPR3 user on the xuser list.
Hi,
The error message says that you need to replace the SAPECC user with SAPR3.
*** ERROR => the connected user (SAPECC) does not work with the right user/schema
[dbslsdb.cpp 4818]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 4820]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
Regards,
Nikhil
Hi,
Check id the db related environment paths are present for the user at os level.
Give env command to get the results
Regards,
Nikhil
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Nikhil,
I cant find any id of the db here:
C:\Users\eccadm>set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\eccadm\AppData\Roaming
CLIENTNAME=IBS-PC193
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=IBSSERVER75
ComSpec=C:\Windows\system32\cmd.exe
DBMS_TYPE=ada
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\eccadm
LOCALAPPDATA=C:\Users\eccadm\AppData\Local
LOGONSERVER=\\IBSSERVER
NUMBER_OF_PROCESSORS=1
OS=Windows_NT
Path=E:\sapdb\programs\bin;E:\sapdb\programs\pgm;C:\Windows\system32;C:\Windows;
C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;E:\usr\sap\
ECC\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 44 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=2c02
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SAPEXE=E:\usr\sap\ECC\SYS\exe\uc\NTAMD64
SAPLOCALHOST=ibsserver75
SAPSYSTEMNAME=ECC
SESSIONNAME=RDP-Tcp#0
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=E:\usr\sap\ECC\tmp\2
TMP=E:\usr\sap\ECC\tmp\2
USERDNSDOMAIN=IBS.LOCAL
USERDOMAIN=IBS
USERNAME=eccadm
USERPROFILE=C:\Users\eccadm
windir=C:\Windows
Hi Donny ,
Please execute R3trans -d and paste the trans.log
Thanks ,
Manu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi,
it seems you have problems with the connect to database.
C *** ERROR => the connected user (SAPECC) does not work with the right user/schema
[dbslsdb.cpp 4818]
C *** ERROR => application has to work with schema SAPR3 (dbs/ada/schema)
[dbslsdb.cpp 4820]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10563]
M
Please check if the environment variable of the user sidadm wich contains the schema of the db is the same as the schem in db.
Best regards
Willi Eimler
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi S Sriram,
dev_disp:
---------------------------------------------------
trc file: "dev_disp", trc level: 1, release: "701"
---------------------------------------------------
sysno 00
sid ECC
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 32
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 2728
Fri Feb 27 16:20:34 2015
kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
length of sys_adm_ext is 576 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2728) [dpxxdisp.c 1286]
shared lib "dw_xml.dll" version 32 successfully loaded
shared lib "dw_xtc.dll" version 32 successfully loaded
shared lib "dw_stl.dll" version 32 successfully loaded
shared lib "dw_gui.dll" version 32 successfully loaded
shared lib "dw_mdm.dll" version 32 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Feb 27 16:20:39 2015
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ibsserver75_ECC_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000C4B0050, size: 6614144)
DpShMCreate: allocated sys_adm at 000000000C4B0050
DpShMCreate: allocated wp_adm at 000000000C4B2270
DpShMCreate: allocated tm_adm_list at 000000000C4B96D0
DpShMCreate: allocated tm_adm at 000000000C4B9730
DpShMCreate: allocated wp_ca_adm at 000000000CA5CFB0
DpShMCreate: allocated appc_ca_adm at 000000000CA62DB0
DpShMCreate: allocated comm_adm at 000000000CA64CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000CAEB980
DpShMCreate: allocated gw_adm at 000000000CAEBA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000CAEBA30
DpShMCreate: allocated wall_adm at 000000000CAEBA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Feb 27 16:20:40 2015
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8191MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8192MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1681]
Fri Feb 27 16:20:41 2015
***LOG Q0K=> DpMsAttach, mscon ( ibsserver75) [dpxxdisp.c 12483]
DpStartStopMsg: send start message (myname is >ibsserver75_ECC_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 32
Release check o.K.
Fri Feb 27 16:21:21 2015
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:31 2015
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Feb 27 15:21:31 2015
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-------------------------------------------------------------------------------------------------------------------------------
0 DIA 2940 Ended no 1 0 0
1 DIA 3000 Ended no 1 0 0
2 DIA 1328 Ended no 1 0 0
3 DIA 1756 Ended no 1 0 0
4 DIA 408 Ended no 1 0 0
5 DIA 1468 Ended no 1 0 0
6 DIA 1500 Ended no 1 0 0
7 DIA 2452 Ended no 1 0 0
8 DIA 2088 Ended no 1 0 0
9 DIA 2364 Ended no 1 0 0
10 UPD 2812 Ended no 1 0 0
11 ENQ 796 Ended no 1 0 0
12 BTC 1804 Ended no 1 0 0
13 BTC 2120 Ended no 1 0 0
14 BTC 1344 Ended no 1 0 0
15 SPO 3080 Ended no 1 0 0
16 UP2 3088 Ended no 1 0 0
Dispatcher Queue Statistics Fri Feb 27 15:21:31 2015
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 6 | 6 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Feb 27 15:21:31 2015
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Feb 27 15:21:31 2015
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:36 2015
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ibsserver75_ECC_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1668) (SOFT_KILL)
Stop icman
killing process (2676) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1668 HANDLE:836)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:37 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1668 HANDLE:836)
wait for end of icman
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:38 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:39 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:40 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:41 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:42 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:43 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:44 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:45 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:46 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:47 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2676 HANDLE:844)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=953
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 27 16:21:48 2015
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2676 HANDLE:844)
DpStartStopMsg: send stop message (myname is >ibsserver75_ECC_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=ibsserver75_ECC_00 , sapsysnr= 0, hostname=ibsserver75
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Feb 27 16:21:49 2015
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12829]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 832 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 832 (pos=2)
SiSelNRemove: removed sock 832
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 832
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2728) [dpxxdisp.c 11045]
Good Bye .....
dev_ms:
---------------------------------------------------
trc file: "dev_ms", trc level: 1, release: "701"
---------------------------------------------------
[Thr 1596] Fri Feb 27 16:20:34 2015
[Thr 1596] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 11
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 1340
[Thr 1596] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1340) [msxxserv.c 1853]
[Thr 1596] load acl file = E:\usr\sap\ECC\SYS\global\ms_acl_info.DAT
[Thr 1596] MsGetOwnIpAddr: my host addresses are :
[Thr 1596] 1 : [192.168.1.70] ibsserver75.ibs.local (HOSTNAME)
[Thr 1596] 2 : [127.0.0.1] ibsserver75.ibs.local (LOCALHOST)
[Thr 1596] MsHttpInit: full qualified hostname = ibsserver75.ibs.local
[Thr 1596] HTTP logging is switch off
[Thr 1596] set HTTP state to LISTEN
[Thr 1596] MsHttpOwnDomain: own domain[1] = ibs.local
[Thr 1596] ms/icf_info_server : deleted
[Thr 1596] *** I listen to port sapmsECC (3600) ***
[Thr 1596] *** I listen to internal port 3900 (3900) ***
[Thr 1596] *** HTTP port 8100 state LISTEN ***
[Thr 1596] CUSTOMER KEY: >E1683021097<
[Thr 1596] build version=701.2008.03.06
[Thr 1596] Fri Feb 27 16:21:48 2015
[Thr 1596] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from ibsserver75_ECC_00 [msxxserv.c 4711]
[Thr 1596] Fri Feb 27 16:31:55 2015
[Thr 1596] *** ERROR => MsSCheckConnections: no response from client C0 (192.168.1.70) after 300 secs received [msxxserv.c 3205]
[Thr 1596] *** ERROR => MsSCheckConnections: disconnect now [192.168.1.70] [msxxserv.c 3209]
Hi
Thanks for your info,
1. Is this DB server or service on? If possible do the full restart and then try again.
2. You have to add the host entrie in host file "IP SAPhostname.domain.com"
3. Refer the SAP Note 1532367 - MsSCheckConnections
BR
SS
S Sriram wrote:
Hi
Thanks for your info,
1. Is this DB server or service on? If possible do the full restart and then try again.
2. You have to add the host entrie in host file "IP SAPhostname.domain.com"
3. Refer the SAP Note 1532367 - MsSCheckConnections
BR
SS
1) the DB (MaxDB) is on the same server and it is on. I have restarted the server again, but still no success
2) yes i have
3) What should I do regarding this note ?
Thanks
Hi,
please go to SQL-level and enter the following statement:
select schemaname from TABLES where TYPE='TABLE'
this shows you all schemas of the datamase. There should be
SUPERDBA, SYSINFO, SUPERDBA and the sap schema like SAPR3 or SAP<SID>.
Now check the if it is the same as in parameter dbs/ada/schema. If not please change parameter dbs/ada/schema to the value you identified with teh sql statement.
Best regards
Willi Eimler
Hi Willy,
nothing changes. I doubt I change it in the right location. Is this the location where I should change them ?
E:\usr\sap\ECC\SYS\profile\ECC_DVEBMGS00_ibsserver75
E:\usr\sap\ECC\SYS\profile\START_DVEBMGS00_ibsserver75
there is a file called DEFAULT.PFL but there is no dbs/ada/schema parameter inside.
Thanks
Hi Donny,
in the DEFAULT.PFL profile you can enter parameters for all Instances. In the
E:\usr\sap\ECC\SYS\profile\START_DVEBMGS00_ibsserver75 (Instance-Profile) you can enter parameter for the specific instance. If you enter the same parameter with different values in both files (Value1 in DEFAULT.PFL and Value2 in Instance-Profile) the parameter value of the Instance-Profile is used in the Instance (Value2). If you have 2 instances in the system, the value in the DEFAULT.PFL (Value1) is used in the Instance you don't entered the value and in the Instance with the parameter in the Instance-Profile Value2 is used.
Please read the Notes 39439 for your connection problem. Maybe this Note helps you.
Best regards
Willi Eimler
Anybody help ?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
84 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.