cancel
Showing results for 
Search instead for 
Did you mean: 

Can we configure SAP server installed in RHEL in windows sapmmc?

sundar_paranam
Discoverer
0 Kudos

Can we configure SAP server installed in RHEL in windows sapmmc(Which is also sap server with same version and same DB)?
I have tried to configure using help from previous post in SCN ( ) but it is not working...  As picture shown below after entering the details am clicking on add but nothing is happening...

Scenario is I have installed 4 VM's with SAP installed in all (out of it 3 linux and 1 windows) & all communicating well and they are in same Network/Landscape & I can configure/manage/logon all servers in host GUI... But If I shutdown my VM or a Laptop...  Every time I have to start all the servers... by starting lsnrctl, DB, sap for all the servers,

Is there any chance to configure sap in windows sapmmc...???
Kindly suggest the process step by step...

Thanks in advance...

Accepted Solutions (1)

Accepted Solutions (1)

yakcinar
Active Contributor
0 Kudos

Hello Sundar,

Yes, you can add your SAP systems from various hosts to an SAP MMC.

All you need to do is go to properties of SAP Systems. Then On Fixed tab write the System (SID) and on Instance field <Hostname> and <Instance Nr> with a space between.

You can see examples below.

Don't forget to save. Otherwise you will lose the config when SAP MMC is closed.

And one more note.  The port 5##13 to hosts must be open. ## is Instance Nr as you may know.

Regards,

Yuksel AKCINAR

bxiv
Active Contributor
0 Kudos

To add if your systems are sending data to the SLD, its much easier to load them in your central MMC; by default if you leave "*" then it loads all the systems.

Answers (2)

Answers (2)

Former Member
0 Kudos

Sundar,

To add additional servers to the fixed list you have to give permission to the ID that you are running the Windows MMC from. In a Windows environment that is easy to do because of Active Directory. It gets a lot more complicated when you are trying to log into a Linux server. It may be possible if you allow your PAM to authenticate to Active Directory through Kerberos / LDAP or winbind. It may be easier to use LVM which allows you to start/stop your servers through connections to the host agent. Since the host agent is using a web service that is consistent across platforms it eliminates the platform issues.

Brian

sundar_paranam
Discoverer
0 Kudos

Hi Yüksel

Thank you for the reply It helped me to configure but i struck in some place.. Dispatcher is getting stopped... I tried to add 3 different sap servers in sapmmc and tried to start.. Three are getting same errors(Guess same error)


After your suggestion i was able to configure and start SIDadm of host but immediately or after 30sec Dispatcher gets stopped tried to find out some solutions but didnt worked... But i was able to start from there servers manually in linux way startsap, but not in SAPMMC way...
Could you or please help me in solving trace given below...

---------------------------------------------------

trc file: "dev_disp.new", trc level: 1, release: "700"

---------------------------------------------------

sysno      00

sid        W41

systemid   387 (Intel x86 with Linux)

relno      7000

patchlevel 0

patchno    353

intno      20050900

make:      single threaded, Unicode, optimized

pid        22162

kernel runs with dp version 247000(ext=110000) (@(#) DPLIB-INT-VERSION-247000-UC)

length of sys_adm_ext is 576 bytes

*** SWITCH TRC-HIDE on ***

***LOG Q00=> DpSapEnvInit, DPStart (00 22162) [dpxxdisp.c   1345]

  shared lib "dw_xml.so" version 353 successfully loaded

  shared lib "dw_xtc.so" version 353 successfully loaded

  shared lib "dw_stl.so" version 353 successfully loaded

  shared lib "dw_gui.so" version 353 successfully loaded

  shared lib "dw_mdm.so" version 353 successfully loaded

rdisp/softcancel_sequence :  -> 0,5,-1

use internal message server connection to port 3900

Tue Mar 31 00:02:41 2015

*** WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0042.qqq.nxst) took 21 seconds

Tue Mar 31 00:02:52 2015

*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 11 seconds

***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5540]

MtxInit: 30000 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: VMC (JAVA VM in WP) is not active

DpIPCInit2: start server >willsys41_W41_00                        <

DpShMCreate: sizeof(wp_adm) 17120 (1712)

DpShMCreate: sizeof(tm_adm) 4480000 (22288)

DpShMCreate: sizeof(wp_ca_adm) 28800 (96)

DpShMCreate: sizeof(appc_ca_adm) 9600 (96)

DpCommTableSize: max/headSize/ftSize/tableSize=500/8/524056/524064

DpShMCreate: sizeof(comm_adm) 524064 (1036)

DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0

DpShMCreate: sizeof(slock_adm) 0 (92)

DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0

DpShMCreate: sizeof(file_adm) 0 (68)

DpShMCreate: sizeof(vmc_adm) 0 (1684)

DpShMCreate: sizeof(wall_adm) (38456/34360/80/184)

DpShMCreate: sizeof(gw_adm) 48

DpShMCreate: SHM_DP_ADM_KEY (addr: 0x4ed2000, size: 5141584)

DpShMCreate: allocated sys_adm at 0x4ed2000

DpShMCreate: allocated wp_adm at 0x4ed4260

DpShMCreate: allocated tm_adm_list at 0x4ed8540

DpShMCreate: allocated tm_adm at 0x4ed8570

DpShMCreate: allocated wp_ca_adm at 0x531e170

DpShMCreate: allocated appc_ca_adm at 0x53251f0

DpShMCreate: allocated comm_adm at 0x5327770

DpShMCreate: system runs without slock table

DpShMCreate: system runs without file table

DpShMCreate: allocated vmc_adm_list at 0x53a7690

DpShMCreate: allocated gw_adm at 0x53a76d0

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated ca_info at 0x53a7700

DpShMCreate: allocated wall_adm at 0x53a7790

MBUF state OFF

DpCommInitTable: init table for 500 entries

DpRqQInit: Parameter rdisp/queue_lock_level = 2

rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80

ThTaskStatus: rdisp/reset_online_during_debug 0

EmInit: MmSetImplementation( 2 ).

MM global diagnostic options set: 0

<ES> client 0 initializing ....

<ES> EsILock: use spinlock for locking

<ES> InitFreeList

<ES> block size is 1024 kByte.

Using implementation map

<EsMap> EsMapUnamFileMapInit: Initialize the memory 240 MB

Linux: Kernel supports shared memory disclaiming

Linux: using madvise(<pointer>, <size>, 9).

Linux: disclaiming for shared memory enabled

<ES> 239 blocks reserved for free list.

ES initialized.

mm.dump: set maximum dump mem to 96 MB

Tue Mar 31 00:02:53 2015

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1752]

***LOG Q0K=> DpMsAttach, mscon ( willsys41) [dpxxdisp.c   12953]

DpStartStopMsg: send start message (myname is >willsys41_W41_00                        <)

DpStartStopMsg: start msg sent

Warning: Swap space is configured quite small with 5035 MB.

It should be two times larger than the amount of RAM (3066 MB).

See note 171356 for more information.

Warning: tmpfs at /dev/shm is configured quite small with 1532 MB!

Minimum value is 2048 MB.

Recommended size is 75 % of RAM + swap.

*** INFO  Shm 13 in Pool 10    59082 KB estimated     58800 KB real (    -282 KB    -72 %)

CCMS: start to initalize 3.X shared alert area (first segment).

*** ERROR => DpWPCheck: W0 (pid 22217) died (severity=0, status=65280) [dpxxdisp.c   16083]

child (pid=22217) exited with exit code 255

my types changed after wp death/restart 0xbf --> 0xbe

*** ERROR => DpWPCheck: W1 (pid 22218) died (severity=0, status=65280) [dpxxdisp.c   16083]

child (pid=22218) exited with exit code 255

*** ERROR => DpWPCheck: W2 (pid 22219) died (severity=0, status=65280) [dpxxdisp.c   16083]

child (pid=22219) exited with exit code 255

*** ERROR => DpWPCheck: W3 (pid 22220) died (severity=0, status=65280) [dpxxdisp.c   16083]

child (pid=22220) exited with exit code 255

my types changed after wp death/restart 0xbe --> 0xbc

my types changed after wp death/restart 0xbc --> 0xb8

my types changed after wp death/restart 0xb8 --> 0xb0

my types changed after wp death/restart 0xb0 --> 0xa0

my types changed after wp death/restart 0xa0 --> 0x80

*** DP_FATAL_ERROR => DpWPCheck: no more work processes

*** DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

NiWait: sleep (10000ms) ...

NiISelect: timeout 10000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:04 2015

NiISelect: TIMEOUT occured (10000ms)

dump system status

Workprocess Table (long) Tue Mar 31 07:03:04 2015

========================

No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table

-------------------------------------------------------------------------------------------------------------------------------

0 DIA    22217 Ended         no      1   0        0                                                                         

1 DIA    22218 Ended         no      1   0        0                                                                         

2 DIA    22219 Ended         no      1   0        0                                                                         

3 DIA    22220 Ended         no      1   0        0                                                                         

4 UPD    22221 Ended         no      1   0        0                                                                         

5 ENQ    22222 Ended         no      1   0        0                                                                         

6 BTC    22223 Ended         no      1   0        0                                                                         

7 BTC    22224 Ended         no      1   0        0                                                                         

8 SPO    22225 Ended         no      1   0        0                                                                         

9 UP2    22226 Ended         no      1   0        0                                                                         

Dispatcher Queue Statistics Tue Mar 31 07:03:04 2015

===========================

+------+--------+--------+--------+--------+--------+

|  Typ |    now |   high |    max | writes |  reads |

+------+--------+--------+--------+--------+--------+

| NOWP |      4 |      4 |   2000 |      4 |      0 |

+------+--------+--------+--------+--------+--------+

|  DIA |      1 |      1 |   2000 |      1 |      0 |

+------+--------+--------+--------+--------+--------+

|  UPD |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

|  ENQ |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

|  BTC |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

|  SPO |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

|  UP2 |      0 |      0 |   2000 |      0 |      0 |

+------+--------+--------+--------+--------+--------+

max_rq_id 6

wake_evt_udp_now 1

wake events       total     5,  udp     1 ( 20%),  shm     4 ( 80%)

since last update total     5,  udp     1 ( 20%),  shm     4 ( 80%)

Dump of tm_adm structure: Tue Mar 31 07:03:04 2015

=========================

Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)

Workprocess Comm. Area Blocks Tue Mar 31 07:03:04 2015

=============================

Slots: 300, Used: 0, Max: 0

+------+--------------+----------+-------------+

|   id | owner        |   pid    | eyecatcher  |

+------+--------------+----------+-------------+

NiWait: sleep (5000ms) ...

NiISelect: timeout 5000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:10 2015

NiISelect: TIMEOUT occured (5000ms)

DpHalt: shutdown server >willsys41_W41_00                        < (normal)

DpJ2eeDisableRestart

DpModState: buffer in state MBUF_OFF

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIModState: change state to SHUTDOWN

DpModState: change server state from STARTING to SHUTDOWN

Switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect( key 57 valid )

ShmProtect( slot Index 56 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x151f000)

ShmProtect( after shmat )

ShmProtect: shmat key 57 prot 3/0 done

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect( key 57 valid )

ShmProtect( slot Index 56 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x151f000)

ShmProtect( after shmat )

ShmProtect: shmat key 57 prot 1/4096 done

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

Stop work processes

Stop gateway

killing proc (22215) (SOFT_KILL)

Stop icman

killing proc (22216) (SOFT_KILL)

Terminate gui connections

wait for end of work processes

wait for end of gateway

kill(22215,0) -> ESRCH: process died

wait for end of icman

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:11 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:12 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:13 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:14 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:15 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:16 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:17 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:18 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:19 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:20 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:21 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) successful -> process alive

waiting for termination of icman ...

NiWait: sleep (1000ms) ...

NiISelect: timeout 1000ms

NiISelect: maximum fd=12

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Tue Mar 31 00:03:23 2015

NiISelect: TIMEOUT occured (1000ms)

kill(22216,0) -> ESRCH: process died

DpStartStopMsg: send stop message (myname is >willsys41_W41_00                        <)

AdGetSelfIdentRecord: >                                                                           <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0

DpConvertRequest: net size = 189 bytes

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)

MsINiWrite: sent 562 bytes

send msg (len 110+452) to name                    -, type 4, key -

DpStartStopMsg: stop msg sent

NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes

MsIBufAlloc: allocated buffer

NiIRead: hdl 2 received data (rcd=458,pac=1,MESG_IO)

NiBufIIn: NIBUF len=458

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 458 bytes

MSG received, len 110+348, flag 4, from willsys41_W41_00    , typ 0, key FFFFFFFF00000000

DpHalt: received 348 bytes from message server

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -

DpHalt: received 4 bytes from message server

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -

DpHalt: received 4 bytes from message server

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -

DpHalt: received 4 bytes from message server

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -

DpHalt: received 4 bytes from message server

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -

DpHalt: received 4 bytes from message server

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -

DpHalt: received 4 bytes from message server

NiIRead: hdl 2 received data (rcd=214,pac=1,MESG_IO)

NiBufIIn: NIBUF len=214

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 214 bytes

MSG received, len 110+104, flag 3, from MSG_SERVER          , typ 0, key -

DpHalt: received 104 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)

NiBufIIn: NIBUF len=274

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 274 bytes

MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -

DpHalt: received 164 bytes from message server

NiIRead: hdl 2 recv would block (errno=EAGAIN)

NiIRead: read for hdl 2 timed out (0ms)

DpHalt: no more messages from the message server

DpHalt: send keepalive to synchronize with the message server

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)

MsINiWrite: sent 114 bytes

send msg (len 110+4) to name           MSG_SERVER, type 0, key -

MsSndName: MS_NOOP ok

Send 4 bytes to MSG_SERVER

NiIRead: hdl 2 recv would block (errno=EAGAIN)

NiIPeek: peek successful for hdl 2 (r)

NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)

NiBufIIn: NIBUF len=114

NiBufIIn: packet complete for hdl 2

NiBufReceive starting

MsINiRead: received 114 bytes

MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -

Received 4 bytes from MSG_SERVER                             

Received opcode MS_NOOP from msg_server, reply MSOP_OK

MsOpReceive: ok

MsSendKeepalive : keepalive sent to message server

NiIRead: hdl 2 recv would block (errno=EAGAIN)

Tue Mar 31 00:03:24 2015

NiIPeek: peek for hdl 2 timed out (r; 1000ms)

NiIRead: read for hdl 2 timed out (1000ms)

DpHalt: no more messages from the message server

DpHalt: sync with message server o.k.

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   13304]

NiBufSend starting

NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server

MsIDetach: call exit function

DpMsShutdownHook called

NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0

SiSelPSet: set events of sock 11 to: ---

NiBufISelRemove: remove hdl 2 from set0

SiSelPRemove: removed last sock 11 (pos=3)

NiSelIRemove: removed hdl 2

NiICloseHandle: shutdown and close hdl 2 / sock 11

NiBufIClose: clear extension for hdl 2

MsIDetach: detach MS-system

cleanup EM

EsCleanup ....

EsCleanup destroy slot 0

<EsMap: unlink /SAP_ES_00_000

EmCleanup() -> 0

Es2Cleanup: Cleanup ES2

ShmCreate( 76, 0, 2, 0x0xcef3328 )

ShmKeyPermission( 76 ) = 0740 (octal)

ShmDelete( 13 )

cleanup event management

cleanup shared memory/semaphores

ShmCleanup SHM_SYS_ADM_KEY

ShmCleanup( 1 )

ShmCreate( 1, 0, 2, 0x0xbf99a5e8 )

ShmProtect( 1, 3 )

ShmProtect( key 1 valid )

ShmProtect( slot Index 0 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x5e1000)

ShmProtect( after shmat )

ShmProtect: shmat key 1 prot 3/0 done

ShmCreate( 1, 0, 2, -> 0x0x5e1000 )

ShmCleanup SHM_DP_ADM_KEY

ShmCleanup( 2 )

ShmCreate( 2, 0, 2, 0x0xbf99a5e8 )

ShmProtect( 2, 3 )

ShmProtect( key 2 valid )

ShmProtect( slot Index 1 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x4ed2000)

ShmProtect( after shmat )

ShmProtect: shmat key 2 prot 3/0 done

ShmCreate( 2, 0, 2, -> 0x0x4ed2000 )

ShmCleanup SHM_DP_CA_KEY

ShmCleanup( 3 )

ShmCreate( 3, 0, 2, 0x0xbf99a5e8 )

ShmProtect( 3, 3 )

ShmProtect( key 3 valid )

ShmProtect( slot Index 2 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x1655000)

ShmProtect( after shmat )

ShmProtect: shmat key 3 prot 3/0 done

ShmCreate( 3, 0, 2, -> 0x0x1655000 )

ShmCleanup SHM_PF_KEY

ShmCleanup( 4 )

ShmCreate( 4, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 4 ) = 0740 (octal)

ShmCleanup SHM_PRES_BUF

ShmCleanup( 14 )

ShmCreate( 14, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 14 ) = 0740 (octal)

ShmCleanup SHM_CALI_BUFFER

ShmCleanup( 11 )

ShmCreate( 11, 0, 2, 0x0xbf99a5e8 )

ShmGet( 10, 11, 0, 2, 0x0xbf99a52c )

ShmCleanup SHM_DB_TBUFF

ShmCleanup( 19 )

ShmCreate( 19, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 19 ) = 0740 (octal)

ShmCleanup SHM_DB_TBUFF_P

ShmCleanup( 33 )

ShmCreate( 33, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 33 ) = 0740 (octal)

ShmCleanup SHM_DB_STBUFF

ShmCleanup( 41 )

ShmCreate( 41, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 41 ) = 0740 (octal)

ShmCleanup SHM_DB_TTBUFF

ShmCleanup( 42 )

ShmCreate( 42, 0, 2, 0x0xbf99a5e8 )

ShmGet( 40, 42, 0, 2, 0x0xbf99a52c )

ShmCreate( 40, 0, 2, 0x0xbf99a1ec )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_FTBUFF

ShmCleanup( 43 )

ShmCreate( 43, 0, 2, 0x0xbf99a5e8 )

ShmGet( 40, 43, 0, 2, 0x0xbf99a52c )

ShmCreate( 40, 0, 2, 0x0xbf99a1ec )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_SNTBUFF

ShmCleanup( 45 )

ShmCreate( 45, 0, 2, 0x0xbf99a5e8 )

ShmGet( 40, 45, 0, 2, 0x0xbf99a52c )

ShmCreate( 40, 0, 2, 0x0xbf99a1ec )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_IRBUFF

ShmCleanup( 44 )

ShmCreate( 44, 0, 2, 0x0xbf99a5e8 )

ShmGet( 40, 44, 0, 2, 0x0xbf99a52c )

ShmCreate( 40, 0, 2, 0x0xbf99a1ec )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_OBJ_BUFFER

ShmCleanup( 54 )

ShmCreate( 54, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 54 ) = 0740 (octal)

ShmCleanup SHM_DB_SYNC

ShmCleanup( 46 )

ShmCreate( 46, 0, 2, 0x0xbf99a5e8 )

ShmGet( 40, 46, 0, 2, 0x0xbf99a52c )

ShmCreate( 40, 0, 2, 0x0xbf99a1ec )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_CUA_BUFFER

ShmCleanup( 47 )

ShmCreate( 47, 0, 2, 0x0xbf99a5e8 )

ShmGet( 40, 47, 0, 2, 0x0xbf99a52c )

ShmCreate( 40, 0, 2, 0x0xbf99a1ec )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_DB_OTR_BUFFER

ShmCleanup( 64 )

ShmCreate( 64, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 64 ) = 0740 (octal)

ShmCleanup SHM_DB_ESM_BUFFER

ShmCleanup( 65 )

ShmCreate( 65, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 65 ) = 0740 (octal)

ShmCleanup SHM_ROLL_AREA_KEY

ShmCleanup( 9 )

ShmCreate( 9, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 9 ) = 0740 (octal)

ShmCleanup SHM_PAGING_AREA_KEY

ShmCleanup( 8 )

ShmCreate( 8, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 8 ) = 0740 (octal)

ShmCleanup SHM_ROLL_ADM_KEY

ShmCleanup( 17 )

ShmCreate( 17, 0, 2, 0x0xbf99a5e8 )

ShmGet( 10, 17, 0, 2, 0x0xbf99a52c )

ShmCleanup SHM_PAGING_ADM_KEY

ShmCleanup( 18 )

ShmCreate( 18, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 18 ) = 0740 (octal)

ShmCleanup SHM_PXA_KEY

ShmCleanup( 6 )

ShmCreate( 6, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 6 ) = 0740 (octal)

ShmCleanup SHM_ENQ_TABLE_KEY

ShmCleanup( 34 )

ShmCreate( 34, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 34 ) = 0740 (octal)

ShmCleanup SHM_ENQID_KEY

ShmCleanup( 58 )

ShmCreate( 58, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 58 ) = 0740 (octal)

ShmCleanup SHM_VB_ADM_KEY

ShmCleanup( 7 )

ShmCreate( 7, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 7 ) = 0740 (octal)

ShmCleanup SHM_ES2_ADM

ShmCleanup( 76 )

ShmCreate( 76, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 76 ) = 0740 (octal)

ShmCleanup SHM_EM_ADM

ShmCleanup( 51 )

ShmCreate( 51, 0, 2, 0x0xbf99a5e8 )

ShmProtect( 51, 3 )

ShmProtect( key 51 valid )

ShmProtect( slot Index 50 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x6e14000)

ShmProtect( after shmat )

ShmProtect: shmat key 51 prot 3/0 done

ShmCreate( 51, 0, 2, -> 0x0x6e14000 )

ShmCleanup SHM_EM2_ADM

ShmCleanup( 77 )

ShmCreate( 77, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 77 ) = 0740 (octal)

ShmCleanup SHM_EG2_ADM

ShmCleanup( 78 )

ShmCreate( 78, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 78 ) = 0740 (octal)

ShmCleanup SHM_MSBUF

ShmCleanup( 52 )

ShmCreate( 52, 0, 2, 0x0xbf99a5e8 )

ShmProtect( 52, 3 )

ShmProtect( key 52 valid )

ShmProtect( slot Index 51 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x60b000)

ShmProtect( after shmat )

ShmProtect: shmat key 52 prot 3/0 done

ShmCreate( 52, 0, 2, -> 0x0x60b000 )

ShmCleanup SHM_THRUN_ADM_KEY(th run adm)

ShmCleanup( 30 )

ShmCreate( 30, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 30 ) = 0740 (octal)

ShmCleanup SHM_JAVA

ShmCleanup( 70 )

ShmCreate( 70, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 70 ) = 0740 (octal)

ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)

ShmCleanup( 56 )

ShmCreate( 56, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 56 ) = 0740 (octal)

ShmCleanup SHM_PROFILE

ShmCleanup( 57 )

ShmCreate( 57, 0, 2, 0x0xbf99a5e8 )

ShmProtect( 57, 3 )

ShmProtect( key 57 valid )

ShmProtect( slot Index 56 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x151f000)

ShmProtect( after shmat )

ShmProtect: shmat key 57 prot 3/0 done

ShmCreate( 57, 0, 2, -> 0x0x151f000 )

ShmCleanup SHM_NO_BUFFER

ShmCleanup( 48 )

ShmCreate( 48, 0, 2, 0x0xbf99a5e8 )

ShmGet( 40, 48, 0, 2, 0x0xbf99a52c )

ShmCreate( 40, 0, 2, 0x0xbf99a1ec )

ShmKeyPermission( 40 ) = 0740 (octal)

removing request queue

ShmCleanup( 31 )

ShmCreate( 31, 0, 2, 0x0xbf99a5d8 )

ShmProtect( 31, 3 )

ShmProtect( key 31 valid )

ShmProtect( slot Index 30 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x573d000)

ShmProtect( after shmat )

ShmProtect: shmat key 31 prot 3/0 done

ShmCreate( 31, 0, 2, -> 0x0x573d000 )

ShmCleanup SHM_POOL_0

ShmCleanup( 10 )

ShmCreate( 10, 0, 2, 0x0xbf99a5e8 )

ShmProtect( 10, 3 )

ShmProtect( key 10 valid )

ShmProtect( slot Index 9 )

ShmProtect( Mode: 76000000 )

ShmCreate( 10, 0, 2, -> 0x0xb3723000 )

ShmCleanup SHM_DB_POOL

ShmCleanup( 40 )

ShmCreate( 40, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 40 ) = 0740 (octal)

ShmCleanup SHM_POOL_50

ShmCleanup( 50 )

ShmCreate( 50, 0, 2, 0x0xbf99a5e8 )

ShmKeyPermission( 50 ) = 0740 (octal)

MiCleanup:

ShmCleanup( 62 )

ShmCreate( 62, 0, 2, 0x0xbf99a5c8 )

ShmProtect( 62, 3 )

ShmProtect( key 62 valid )

ShmProtect( slot Index 61 )

ShmProtect( Mode: 0 )

ShmProtect( before shmdt )

ShmProtect( after shmdt )

ShmProtect( before shmat 0x8b30e000)

ShmProtect( after shmat )

ShmProtect: shmat key 62 prot 3/0 done

ShmCreate( 62, 0, 2, -> 0x0x8b30e000 )

MpiCleanup() -> 0

SemKeyPermission( 1 ) = 0740 (octal)

SemKeyPermission( 1 ) = 0740 (octal)

SemKeyPermission( 6 ) = 0740 (octal)

SemKeyPermission( 6 ) = 0740 (octal)

SemKeyPermission( 7 ) = 0740 (octal)

SemKeyPermission( 7 ) = 0740 (octal)

SemKeyPermission( 8 ) = 0740 (octal)

SemKeyPermission( 10 ) = 0740 (octal)

SemKeyPermission( 10 ) = 0740 (octal)

SemKeyPermission( 11 ) = 0740 (octal)

SemKeyPermission( 11 ) = 0740 (octal)

SemKeyPermission( 12 ) = 0740 (octal)

SemKeyPermission( 12 ) = 0740 (octal)

SemKeyPermission( 13 ) = 0740 (octal)

SemKeyPermission( 13 ) = 0740 (octal)

SemKeyPermission( 14 ) = 0740 (octal)

SemKeyPermission( 14 ) = 0740 (octal)

SemKeyPermission( 15 ) = 0740 (octal)

SemKeyPermission( 16 ) = 0740 (octal)

SemKeyPermission( 16 ) = 0740 (octal)

SemKeyPermission( 17 ) = 0740 (octal)

SemKeyPermission( 17 ) = 0740 (octal)

SemKeyPermission( 18 ) = 0740 (octal)

SemKeyPermission( 18 ) = 0740 (octal)

SemKeyPermission( 19 ) = 0740 (octal)

SemKeyPermission( 19 ) = 0740 (octal)

SemKeyPermission( 20 ) = 0740 (octal)

SemKeyPermission( 20 ) = 0740 (octal)

SemKeyPermission( 21 ) = 0740 (octal)

SemKeyPermission( 21 ) = 0740 (octal)

SemKeyPermission( 22 ) = 0740 (octal)

SemKeyPermission( 22 ) = 0740 (octal)

SemKeyPermission( 24 ) = 0740 (octal)

SemKeyPermission( 24 ) = 0740 (octal)

SemKeyPermission( 25 ) = 0740 (octal)

SemKeyPermission( 25 ) = 0740 (octal)

SemKeyPermission( 26 ) = 0740 (octal)

SemKeyPermission( 26 ) = 0740 (octal)

SemKeyPermission( 27 ) = 0740 (octal)

SemKeyPermission( 27 ) = 0740 (octal)

SemKeyPermission( 28 ) = 0740 (octal)

SemKeyPermission( 28 ) = 0740 (octal)

SemKeyPermission( 29 ) = 0740 (octal)

SemKeyPermission( 29 ) = 0740 (octal)

SemKeyPermission( 30 ) = 0740 (octal)

SemKeyPermission( 30 ) = 0740 (octal)

SemKeyPermission( 31 ) = 0740 (octal)

SemKeyPermission( 31 ) = 0740 (octal)

SemKeyPermission( 35 ) = 0740 (octal)

SemKeyPermission( 35 ) = 0740 (octal)

SemKeyPermission( 36 ) = 0740 (octal)

SemKeyPermission( 37 ) = 0740 (octal)

SemKeyPermission( 42 ) = 0740 (octal)

SemKeyPermission( 42 ) = 0740 (octal)

SemKeyPermission( 43 ) = 0740 (octal)

SemKeyPermission( 43 ) = 0740 (octal)

SemKeyPermission( 44 ) = 0740 (octal)

SemKeyPermission( 44 ) = 0740 (octal)

SemKeyPermission( 45 ) = 0740 (octal)

SemKeyPermission( 47 ) = 0740 (octal)

SemKeyPermission( 47 ) = 0740 (octal)

SemKeyPermission( 48 ) = 0740 (octal)

SemKeyPermission( 48 ) = 0740 (octal)

SemKeyPermission( 49 ) = 0740 (octal)

SemKeyPermission( 49 ) = 0740 (octal)

SemKeyPermission( 50 ) = 0740 (octal)

SemKeyPermission( 51 ) = 0740 (octal)

SemKeyPermission( 51 ) = 0740 (octal)

SemKeyPermission( 53 ) = 0740 (octal)

SemKeyPermission( 53 ) = 0740 (octal)

SemKeyPermission( 54 ) = 0740 (octal)

SemKeyPermission( 54 ) = 0740 (octal)

SemKeyPermission( 55 ) = 0740 (octal)

SemKeyPermission( 55 ) = 0740 (octal)

SemKeyPermission( 56 ) = 0740 (octal)

SemKeyPermission( 56 ) = 0740 (octal)

SemKeyPermission( 57 ) = 0740 (octal)

SemKeyPermission( 57 ) = 0740 (octal)

SemKeyPermission( 58 ) = 0740 (octal)

SemKeyPermission( 58 ) = 0740 (octal)

SemKeyPermission( 59 ) = 0740 (octal)

SemKeyPermission( 62 ) = 0740 (octal)

SemKeyPermission( 63 ) = 0740 (octal)

SemKeyPermission( 64 ) = 0740 (octal)

SemKeyPermission( 65 ) = 0740 (octal)

SemKeyPermission( 66 ) = 0740 (octal)

SemKeyPermission( 67 ) = 0740 (octal)

SemKeyPermission( 69 ) = 0740 (octal)

SemKeyPermission( 69 ) = 0740 (octal)

SemKeyPermission( 70 ) = 0740 (octal)

SemKeyPermission( 72 ) = 0740 (octal)

removing Semaphore-Management

closing connect handles (dgm + tcp)

DpDelSocketInfo: del info for socket 0 (type=2)

NiICloseHandle: shutdown and close hdl 0 / sock 8

DpDelSocketInfo: del info for socket 1 (type=1)

NiICloseHandle: shutdown and close hdl 1 / sock 9 - sock 10

***LOG Q05=> DpHalt, DPStop ( 22162) [dpxxdisp.c   11739]

*** shutdown completed - server stopped ***

Thanks in advance....

Regards,

Sundar

chico_zhu
Explorer
0 Kudos

Hi Sundar,

You may want to look at related work process dev_w* to see what exactly happened.