Inspection plan Change

[Former Member]

Hi,

I would like to do a mass change in the inspection plan for the {Info field 2} for the set of material and Group . The Execution of CWBQM Transaction need to change the (Info field 2) column for the whole set of materials and Groups .

Please do suggest for the better solution.

Thanks and Regards.

Vishnu Ravi.

[former_member185450 · Accepted solution]

Dear Vishnu,

Through CWBQM we can able to change the inspection plan header as well as operation details for multiple Groups / Group counters

please refer the below screen shots

Enter the material and plant then select the which data you are going to change i.e. Header / Operation

Select the operation then click on change then fields become editable

Change the desired fields for all operations then save it

Regards,

Venkatesh..

[Former Member · Accepted solution]

Dear Venkatesh ,

Thanks for the Reply .

I would like to change the change the Info Field 2 whole column according to set of material  and not the indivdual set of MIC in the operation . As info Field 2 is individual set of charactersticc doesnt have any link to the MIC .

Please do Kinldy Suggest to solve this promblem .

Thanks and Regards.

Vishnu Ravi.

[anand_rao3 · Accepted solution]

What exact problem are you facing while doing this through CWBQM? Are you not able to load the required records? It is very well possible through it. Below is the sequence,

1. CWBQM with working area Q_TSK_000000000010
2. Go to Inspection Characteristic tab. Click on more selection Criteria. (The one which has yellow arrow symbol)
3. Add group number there as input parameter. For doing so you need to double click on the left side menus that appear as soon as you hit that yellow arrow
4. You can go on adding more input parameters so that more specific records will only be displayed. Here you need to enter only those groups and or MICs whose data you want to change
5. Save and then press Ctril+F7
6. Verify that required records are loaded. If not change the input fields combination as described in step 2 and 3
7. Select Info field2 column or the one which you want to change
8. Then go to Edit > Select > Select All
9. Then go to Extras > Mass Change
10. Input the value that you want to be filled in the field
11. Then click on Check followed by Execute
12. You will be notified that the required values are updates and the log is written
13. Save

Anand

PS - You can give material code also as input at the Header tab