on 01-11-2016 12:56 PM
Hi Gurus,
Created Screen with input fields, Push Buttons using module pool programming concepts and enabled ITS service for the same. Short Cut keys are enabled and working fine in browser due to the addition of shortcut key functionality in ITS HTML.
Enabled Short Cut Key for the Combination of Ctrl + Function key. Since all function keys restricted standard browser and windows events.
But in the scanner device(MC5590- Motorola) no Ctrl, Alt key. So not able to find the specific key combination. Kindly help me on the same.
Refer the device image for more clarification.
Hello,
The Motorola that you have mentioned is of MC55 series and is a mobile computer which is primarily not used for warehouse operations. Even so, you can use it with difficulty.
In this post, you can see: http://www.barcodedatalink.com/pages/keyboard-types.php#55
That this series offers 2 types of keyboards - numeric as well as qwerty. Yours is the numeric one.
If you zoom in on this picture, you will find the Function keys (F1, F2, F3..) in blue on every number key. That means, in order to press, say F1, you will have to press the blue button and then the button "1".
Since you say, you have combination such as Ctrl + function key, from the basic keypad structure for motorola devices, i have gathered that the orange button is for Cntrl. However, i cant be too sure until i have tested it. But you can surely test it : Orange button + blue button + '1'.
Even then, i would suggest to keep simpler key shortcuts such as F1 - Enter, F2 - Back, F3 - Reset and so on.. without the need to press contrl. This will be required to be done in the original module program itself.
Let me know.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Utkarsha Khakde,
Thank you very much for your suggestion/response, I can not use the only function keys(F1,F2....F10) as short cut key for push buttons because all function keys are restricted for Browser /Windows events and also as suggested tried for key combination of Orange+Blue+1 but not working.
So please let me know any alternate possibilities to proceed further .
Thank You,
Vanvan A
Well, I would like to know for what and how are you using the browser. Also let me know which one.
If you are using the Internet Service link for the ITS service created as a simulation to be tested in the IE, then the Function Keys F1, F2, etc usually get the preference from the module pool program. For this you have to make sure you have maintained the 'F Key consistency' in the program.
So, the standard functionalities of these button gets overwritten with the ones in the program.
When you use this on the motorola device too, you use any browser (usually, wavelink), the function of F1, F2 keys take their command from the pool program that is running.
Let me know.
Hi Vanavan,
The following WIKI: How to obtain the function key values for ITSmobile applications might be useful here. (need to use in reverse)
See also the parameter ~ITSMOBILEDEVICEINCLUDE in the WIKI: Service Parameter and Settings
Regards,
Oisin
Hello,
Have you assigned the function keys to those push buttons?
Like Back =F1, Detail =F2, Add =F3 and so on. (If yes, you might need to include that on the button text for the end user to understand).
Please let me know if you have tested these function keys in SAP GUI when you execute this module pool program in SAP GUI, ie, if you press, say F1, the 'back' button command gets executed.
If this is accomplished, executing this in the IE browser should work.
Also, let me know the template generator that you have used for creating templates.
Thanks.
Yes. As per Oisin's comment, you will need to enable the function keys in the module pool program and completely test it there first.
In order to enable them, you can go into the 'GUI status' of each screen -> and then assign the appropriate user command.
You can find more information in this thread: Assign a function key to a push button in modul... | SCN
Hi Oisin,
As mentioned, I have crated PF-STATUS and assigned recommonded function keys for each of the push button, It is working fine SAP module pool program, Desktop browser and HHT Browser... But freely available function keys among (F1,F2... F10) are very less in HHT device because most of the keys are used for Browser Standard Events.
Also am not able to feed the other key Combination along with function key like Ctrl+Function key,Shift+Function Key,Alt+Function Key in HHT device like desktop keyboard.
Thanks..
Vanavan .
Hi ,
As mentioned, I have crated PF-STATUS and assigned recommonded function keys for each of the push button, It is working fine SAP module pool program, Desktop browser and HHT Browser... But freely available function keys among (F1,F2... F10) are very less in HHT device because most of the keys are used for Browser Standard Events.
Also am not able to feed the other key Combination along with function key like Ctrl+Function key,Shift+Function Key,Alt+Function Key in HHT device like desktop keyboard.
Thanks..
Vanavan .
Hello,
As per my knowledge, the function keys take their command from the module pool program rather than the standard browser functions. So, the program functions are given preference over standard if both are present. Please make sure your module pool program function keys are working on Desktop IE browser. If yes, it should work on the device too.
Avoid using Cntrl + function keys as it is anyways a tedious task for the workers on the factory floor. Also, in order for them to just press the Function keys (F1, F2, etc), they will have to press the blue button and then the respective number button, as i told you previously for your device.
User | Count |
---|---|
84 | |
10 | |
10 | |
10 | |
7 | |
6 | |
6 | |
5 | |
4 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.