on 11-30-2005 2:42 AM
Hi matez,
Please help! This is urgent, as I cannot even run RSA1
With reference made to the question I posted yersterday, at
Now, today I get the following error :-
<b> Entry in inbound table already exists
Diagnosis
Inbound parameters already exist in the partner profile under the following key:
/BWDCLNT210/LS//RSSEND////
This relates to the key fields in table EDP21:
SNDPRN Partner number
SNDPRT Partner type
SNDPFC Partner function
MESTYP Message type
MESCOD Message code
MESFCT Message function
TEST Test indicator
Procedure
Please check the EDI partner profile.
</b>
I basically have two Partner Profile LS defined
1)<b>D01CLNT220</b>
Partner no.= 'D01CLNT220'
partn type = 'LS'
typ = US
agent = (enter 'JOHN' and 'EN')
outbound = RSRQST
inbound = RSINFO and RSSEND
partner class = BIW
2)<b>Q01CLNT510</b>
Partner no.= Q01CLNT510
partn type = 'LS'
typ = US
agent = (enter 'JOHN' and 'EN')
outbound = RSRQST
inbound = RSINFO and RSSEND
partner class = BIW
<u>RSRQST</u>
Message Type : RSRQST
Receiver Port : A000000044 (Q01 CLIENT 510) / A000000038 (Q01 CLIENT 220)
Package Size : 1
Output Mode : Transfer IDOC Immedi.
Basic Type : RSREQUST
<u>RSSEND</u>
Message Type : RSSEND
Process Code : RSDR
Tick : Cancel Processing After Syntax Error
Trigger Immediately.
typ = US
agent = (enter 'JOHN' and 'EN')
<u>RSINFO</u>
Message Type : RSINFO
Process Code : RSIN
Tick : Cancel Processing After Syntax Error
Trigger Immediately.
typ = US
agent = (enter 'JOHN' and 'EN')
Please help me to resolve this mates...
Do let me know if I need to elaborate anything further.
Hi John,
as I read from your message, you don't have only two partners defined (D01CLNT220 and Q01CLNT510, and I think these are R/3 source systems), but your BW too (BWDCLNT210)...you can see all (even your pc file source system too) in WE20 transaction...check if your BW have duplicated inbound parameters (RSSEND).
Look directly in EDP21 table via SE16...
Let me know!
Bye,
Roberto
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Roberto mate,
You did me the trick man...
As you indicated, what was missing was a LS for BWDCLNT210 in WE20. The entries was already defined in Table EDP21
I added BWDCLNT210 (WE20)and Phew!...comes RSA1 !
One quickie mate, is the settings that I make in the RSRQST, RSINFO and RSSEND applicable to all the Planning Profiles or is it individually defined ?
AM very grateful for your help, mate!
Hi Roberto,
I am having same problem..
basically i am used SAP ECC 5.0 IDES .
I have 800 client.
I activated the source system by clicking active on right click option.
when i am trying to load data from r/3 to bw i got the error saying that "transfer structure prefix for source system was not defined".
So i came to know that in RSBASIDOC table, the fied TSPREFIX was not defined for the source system.
so i modified the TSPREFIX column value from null to BA.
I saved it and logged off.
when i gave RSA1 , I got the same message saying that " Entry in inbound table already exists"
So i reverted the changes what i did before.
Still i am getting same problem.
I dont know how to proceed further.
Pls. help me....what i have to do.
Thanks for your help...
Hello John,
I have the same problem as yours.I can not use RSA1 transaction ,I get
"Entry in inbound table already exists
Message no. E0412
Diagnosis
Inbound parameters already exist in the partner profile under the following key:
/BWDCLNT022/LS//RSSEND////
This relates to the key fields in table EDP21:
SNDPRN Partner number
SNDPRT Partner type
SNDPFC Partner function
MESTYP Message type
MESCOD Message code
MESFCT Message function
TEST Test indicator
Procedure
Please check the EDI partner profile." error messages.
In WE20 Tcode I can not see my logical name which is BWDCLNT022.
I want to add it under partner type LS in WE20.
But I dont know the correct parametres.
How can I check them.
I dont know the receiver port number , IDOC Basic Type,messega type ,agent.
How can I find the correct parametres for our BW sytem.
How did you find these parametres in your system
I would be appreciate for your help.
Hiya
Please can you help?
Entry in inbound table already exists
Message no. E0412
Diagnosis
Inbound parameters already exist in the partner profile under the following key:
/T90CLNT090/LS//RSSEND////
This relates to the key fields in table EDP21:
SNDPRN Partner number
SNDPRT Partner type
SNDPFC Partner function
MESTYP Message type
MESCOD Message code
MESFCT Message function
TEST Test indicator
Thanks
Hi,
K Ramesh wrote the solution, I want to write the generic solution because he mention his logical name.
The issue is because there is one or more entries in the table EDP21 to partners wich have been deleted from /BWDCLNT210/LS//RSSEND key in WE20.
1- Got to SE16 and enter table EDP21, take note to the entries.
2- Go to WE20 and check whether Partner profile is missing in LS type regarding to EDP21 content.
If there is any missing, just add Parnter profile with same and save.
Partner profile Name: [Logical System]
TYPE: LS
Give:
Ty: US
User: User Name
Lang: EN
and Save.
3- Again re-click on Partner Profile created.
you will see ,there will be some entries in Inbound & out Bound Tabs.
Delete the following from outbound:
1.RSRQST
Delete the following from inbound.
1.RSINFO
2.RSSEND
and save your partner profile.
3. now execute - RSA1, it will ask to active Workbench.
Thanks K.
regards
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hello All,
HERE THE RELAVENT ANSWER:
I found solution for this error.
1. Go to WE20 and check whether Partner profile T90CLNT090 exist in LS type,if not just add Parnter profile with same and save.
Partner profile Name: T90CLNT090
TYPE: LS
Give:
Ty: US
User: User Name
Lang: EN
and Save.
2. Again re-click on Partner Profile: T90CLNT090
you will see ,there will be some entries in Inbound & out Bound Tabs.
Delete the following from outbound:
1.RSRQST
Delete the following from inbound.
1.RSINFO
2.RSSEND
and save your partner profile.
3. now execute - RSA1, it will ask to active Workbench. Just activate it . it will work now.... Cheers.
Regards,
K.Ramesh
Note: Please give some points ,if it solves your problem.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi everyone,
I have the same issue, cannot execute RSA1 and already modify WE20 with the missing entry (BWDCLNT700, LS) but in table RSBASIDOC I dont see this entry.
When I execute RSA1 display the same error and delete from WE20 the new entry.
Please help me to solve this!!!
<b>Entry in inbound table already exists
Message no. E0412
Diagnosis
Inbound parameters already exist in the partner profile under the following key:
/BWDCLNT700/LS//RSSEND////
This relates to the key fields in table EDP21:
SNDPRN Partner number
SNDPRT Partner type
SNDPFC Partner function
MESTYP Message type
MESCOD Message code
MESFCT Message function
TEST Test indicator
Procedure
Please check the EDI partner profile.</b>
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi John,
I think this may help you.
San.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
81 | |
9 | |
9 | |
7 | |
7 | |
6 | |
6 | |
6 | |
5 | |
4 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.