on 03-31-2009 10:32 AM
Hi,
I am getting the following runtime error while testing my webdynpro application. Could somebody please advice only by just adding IP address and hostname in the hosts file solves the error?
If not what could be the problem ?
Error when processing your request
What has happened?
The URL http://hostnam:port/sap/bc/webdynpro/sap/zsales_test was not called due to an error.
Note
The following error text was processed in the system EC6 : Die URL enthält keine vollständige Domainangabe (ctsgvcsap3 statt ctsgvcsap3.).
The error occurred on the application server ctsgvcsap3_EC6_00 and in the work process 6 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
How to check whether FQDN is configured properly or not in the application server. Is it in my computer properties or somewhere else?
ECC6 is installed in some other machine. so we have to check the FQDN of the server where its installed right? If thats the case FQDN is configured in my case.
In my host file i have only localhost entry...i dont have entry for the ECC6 server.
Do i need to add an entry for ECC6 also?In the hostfile only hostname and IP or FQDN and IP should we give?
Please help me out..
Regards
Sireesha.
Edited by: sireesha esukapalli on Mar 31, 2009 11:33 AM
Edited by: sireesha esukapalli on Mar 31, 2009 11:39 AM
To fix the problem properly, you need to make sure that your network administrators setup a named alias that meets the FQDN rules for your ABAP system. You then use this name in the following profile parameters:
The following variables and parameters are used to set the host and domain names:
● SAPLOCALHOST
● SAPLOCALHOSTFULL
● icm/host_name_full
It is all layed out in the help documentation:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Thomos ,
My basis have setup the parameter as per this thread. Still I am getting the following error message .
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zz_00_sflight was not called due to an error.
Note
u2022 The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
u2022 The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
u2022 The termination type was: RABAX_STATE
u2022 The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
u2022 If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
u2022 If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
u2022 If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
u2022 If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SAPUSER -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20090818 -t: 160133 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
When I have checked at ST22 . It shows source code extract -
-
error at Method check
Raise exception type cx_fqdn
exporting host = lv_host
domain = '' .
Please guide me to resolve this .
Thanks.
Best Regards
Milind Nikumbh.
How are you launching the application? Via an old link or by typing it in? The profile parameter only changes the URL generation by the system (such as launching the application from SE80). If you are launching the application and the URL generation is still incorrect then your basis team either hasn't actually set the profile parameter or they haven't restarted the ICM/System for the change to take effect.
Hi Thomos ,
Thanks for your reply .
I am executing my application from se80 only. I
I have changed the profile from RZ10 ( INSTANACE PROFILE ) set saplocalhost = sapserver, saplocalhostfull = sapserver,
icm/host_name_full = sapserver .
I have restarted the application server 3/4 times . I can see the profile details thru RZ11 for the same.
When I debug the application by external debugger , gets error at method check , line no. 10.
It shows lv_host = sapserver , lv_port = 8001 . , at line split lv_host at ':' into lv_host lv_port ,
it raise exception type cx_fqdn . How to avoid this exception . My lv_host = sapserver and port = 8001 . Is this wrong port or hot name ?
Please guide me to resolve this .
Best Regards
Milind Nikumbh.
You have to "fake" being in a domain. That means going ahead and setting up a FQDN on the server side. Then you can go into the HOSTS file in C:\windows\system32\drivers\etc (adjust for where you windows directory is installed). You can add an entry that maps an IP address to any hostname you want. Personally I always install the Microsoft Loopback connector and assign it an IP address of 10.10.0.10. I then map this loopback IP address to whatever full hostname and domain I want. The Loopback connector ensures that you can still use the ABAP-AS system even when not attached to any network.
>
> Hi Thomas ,
>
> During web dynpro development , most of the list / messages / names / alerts are in german language.
>
> My logon laguage is english . How can I changed to it english . Error dumps are also in german .
>
> Please suggest .
>
> Thanks
>
> Milind.
That shouldn't be the case if your system is the final release and has been installed correctly. English text elements should be supplied for everything. If you are logged in with English then you shoul donly see German texts if the English texts are missing. This generally only happens with early, SAP internal builds of the ABAP engine before translation has been completed.
Hi,
I am having the same problem on my ABAP Trial version 7.01
the URL of the web dynpro app is http://Bijo-PC:8000/sap/bc/webdynpro/sap/zcs_course_system
The initial problem was that the services was not active. I activated the relevant web dynpro services in transaction SICF then got another problem, CX_FQDN terrmination type RABAX_STATE. I had some trouble with transaction RZ10 initially, when I clicked on the possible entries(F4) of the 'Profile' field in RZ10, I got a 'no profile found' message. Today I tried it again and
got three options, I chose the 'Instance Profile'. The change option took me to the listing of parameters of the profile but I could not
see the icm/host_name_full parameter in the listing. I am not sure what the problem is, but yesterday I logged into the ABAP server as SAP* and in RZ10 selected the Utilities->Import Profiles->of active servers. Could this have affected the profile?
When I click on the Goto->Profile values->Of a Server in transaction RZ10 and double click on the server name, I see all the parameters including icm/host_name_full which is empty.
Any assistance would be much appreciated
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Milind,
This is kk , i am also facing the same problem as urs. Pls give me clear idea as well as steps how to solve this issue . I AM USING ECC6 IN MY PERSONAL LAPTOP.
Error when processing your request
What has happened?
The URL http://home1:8000/sap/bc/webdynpro/sap/wdr_test_navigation was not called due to an error.
Note
The following error text was processed in the system DEV : Component WDR_TEST_NAVIGATION is not active
The error occurred on the application server home1_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
Method: CONSTRUCTOR of program SAPLWDR_RUNTIME_REPOSITORY
Function: WDR_GET_REPOSITORY of program SAPLWDR_RUNTIME_REPOSITORY
Method: IF_WDR_UCF_RUNTIME_CALLBACK~PRELOAD_APPLICATION of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server home1_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server home1_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: J2EE_ADMIN -l: E -s: DEV -i: home1_DEV_00 -w: 0 -d: 20090811 -t: 105809 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Regards
KK
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi, Sireesha,
I am facing same error.
my problem is that I am using local host, no domain.
is it possible to configure icm/host_name_full = vmerpb.home.net?
home.net is a dummy domain name I used.
Thanks!
George
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
82 | |
9 | |
9 | |
7 | |
7 | |
7 | |
6 | |
6 | |
5 | |
5 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.