04-03-2009 7:24 AM
Hi Friends,
1)Can any one, let me know the device status in IQ02, & how the system internally assign the status at various level.
Eg AVLB ESTO etc.
& what happen in case of Device removal & replacement from the system status point of view.
2) How to change the status ESTO to AVLB - MKTO
Regards,
Chetan
04-15-2009 10:47 AM
Hi Chetan,
There are two types of status for device
1.System Status (standard sap)
2.Custom Defined Status (You will define custom status in PM module)
System Status:
There are three types of system status (Standard Sap)
1.ESTO
2.AVLB
3.INST
1.ESTO :When the devices (serial numbers) are created during the GR,the status of the device is ESTO (devices are in the stores).
2.AVLB:When the devices are issued aganist the cost center or service order from stores to the customer place,the status of the device will be AVLB (available for installtion)
3.INST:When the devices are installed at the customer place,then the status of the device will be INST (the device has been installed).
During the Removal,the device status will change from the INST to AVLB.
Duing the Replacement,
Consider, X -- old device (INST),Y -- new device (AVLB)
During the replacement,X device status will change from INST to AVLB
Y device status will change from AVLB to INST
I hope it helps.
Thanks,
Sasi
04-03-2009 11:09 AM
Hi,
System Stauses are maintained and delivered by SAP..This is the status SAP system sets internally as part of general status management.
In Customizing, a system status is assigned when a status is created.. Check transaction code OIBS for details..
This status tells the user that a certain business transaction was performed for an object.
Thanks
Vinod
04-05-2009 11:31 AM
Hi
1> AVLB,ESTO,INST r system status and equipment has any of these status based on
the business transaction u execute on it.(like MIGO etc..)
IN case of removal/replacement, the device is uninstalled i.e. it becomes AVLB for installation
2> To change form ESTO to AVLB issue the material thru T.code MIGO
Tks
04-15-2009 9:45 AM
Hi,
These are business status, the SAP System sets internally as a part of general status management.
This status tells the user that a certain business transaction was performed for an object.
Following are the various business Process:
Assign to order items
Assignment to delivery
Cancel assignment to PP order
Change of material
Delete assignment order item
Goods receipts
PP order assignment
Serial Number Change
Terminate configuration ref.
Assignment to inspection stock
Blocked condition
Change log entry
Change log meas. document
Change log notification
Change technical object
Create Log Notification
Create Meas. Doc.
Create log entry
Create logbook
Delete assign. to inspectn lot
Delete assignment to delivery
Delete assignment to order
Delivery note assignment
Delivery to customer
Dismantle equipment
Enter PM planing data
Enter PM processing data
Goods issues
Install equipment
Lock PRT from use
Mark for deletion
Order assignment
Release PRT for use
Remove Log Notification
Remove Meas. Doc.
Remove deletion flag
Reset object inactive
Return to stock
Service contract assignment
Set deletion indicator
Set object inactive
Use production resources/tools
Copy partners - delivery
Copy partners - order
Create Equi under construction
With regards,
Sunil
04-15-2009 10:47 AM
Hi Chetan,
There are two types of status for device
1.System Status (standard sap)
2.Custom Defined Status (You will define custom status in PM module)
System Status:
There are three types of system status (Standard Sap)
1.ESTO
2.AVLB
3.INST
1.ESTO :When the devices (serial numbers) are created during the GR,the status of the device is ESTO (devices are in the stores).
2.AVLB:When the devices are issued aganist the cost center or service order from stores to the customer place,the status of the device will be AVLB (available for installtion)
3.INST:When the devices are installed at the customer place,then the status of the device will be INST (the device has been installed).
During the Removal,the device status will change from the INST to AVLB.
Duing the Replacement,
Consider, X -- old device (INST),Y -- new device (AVLB)
During the replacement,X device status will change from INST to AVLB
Y device status will change from AVLB to INST
I hope it helps.
Thanks,
Sasi
04-17-2009 2:06 PM
Hi,
During decvice creation(IQ01) the status is AVLB. After full installation(EG31) the status will be changed to INST i.e. Installed.
Reverse will happen during removal
04-20-2009 4:01 PM
Programatically, you can get the statuses using BAPI_EQUI_GETSTATUS and you can change user statuses using ALM_ME_EQUI_USTATUS_CHANGE.
System status can only be changed by performing the activity that sets the status.
04-28-2009 6:48 AM