on 12-04-2009 4:58 PM
Hi,
If i select the option in sale order at item level Part.dlv./item
option "C" complete delivery under shipping tab..as well as the
overdeliv. tolerance and Under delivery tolerance options to
10% ..system does not let me to perform delivery though the order
quantity is less than the overdelivery tolerance of 10%.
when i attempt to do delivery system is throwing the following error
Full delivery is required (message no.VL062).
We have changed this message type to error from information as per the
client's requirement.
I need to able to deliver with the complete delivery and overdeilv.option..how can i achieve this?
Thanks in advance...
Reg,
JJ
Hi
As per my understanding, though your delivery quantity is within the tollerance limits, it does not match with the order quantity and hence the system is not allowing you to save the delivery. This is how the system is supposed to behave for a complete delivery option.
To handle your issue, you should go for enhancement using an appropriate userexit in delivery, to allow the creation of delivery as long as the delivery quanitity is in the tollerance limits and if required, you can also think about changing the order quantity to the quantity in the sales order when the delivery is saved.
Thanks,
Ravi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I learned from SAP that always the Complete delivery "C" setting over rides the under/over delivery condition. So we have achieved this task by an userexit in the sales order.
Thanks a lot for your efforts.
Reg,
JJ
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi JJ,
Many thanks for updating the forum. This will help us to update our knowledge and also to correct our understanding of the concepts especially when we never faced such kind of scenarios.
I have a doubt regarding the complete delivery and the delivery tollerances. As per your message..
I learned from SAP that always the Complete delivery "C" setting over rides the
under/over delivery condition
In such case, if the order quantity is 100, over delivery tollerance is 10%, complete delivery is checked, then if I create a delivery for 110 quantity...I am under the impression that the system will allow us to create delivery for any quantity between 100 and 110. But as per your message, the system should not allow to create delivery above or below 100. Unfortunately, I donot have access to IDES to test the scenario. If you have tried it, please update us the system behaviour.
Thanks,
Ravi
the settings what you have done are correct and make the below message from information to error
Message no VL 064 the path for the messages is below
Log execution->Shipping>System modification-Specify characteristics for system messages
Regards
Damu
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Does the delivery quantity is less than the order quantity (under delivery) though within the tollerance limits? What is the quantity in sales order and the quantity in delivery when getting this error.
Regards,
Ravi
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Ravi,
Thanks heaps for your response . Let me try to explain with the scenario..
Say for example, the sales ordr qty is 1000 and the settings of VBAP-
KZTLF= 'C' , under deliv.tolerance VBAP-UNTTO =10% . The available qty is
920 as per the system availability check. Here system does not let me
to do delivery but should allow me to do delivery to the quantities
between 900-1000 as per the setting VBAP-UNTTO =10% though VBAP-
KZTLF= 'C' because 10% of 1000 is 900. If the available qty is less than
900 then sytem should not allow me to perform delivery.
Kindly suggest..
Reg,
JJ
Hi...
Sushant: No seperate ship-to-party and at item level complete delivery is marked to C...and under deliv.tolerance also marked to 10%...
SAP2020: Yes..i m maintaining these entries in VD51 ...
Please guys read my requirement once again..i believe you have not got my requriemnt precisely...
Appreciate your help...
Reg,
JJ
I dont have access to SAP and hence not able to test it as stated by you. That is even after maintaining under delivery tolerance in customer master, I have to check whether system is permitting to post the goods issue or not below the order quantity.
Nevertheless, can you please let me know in TCode zero VLP what is maintained for the field "Check under delivery" ??
thanks
G. Lakshmipathi
It is 'Check overdelivery: A-Note about the situation'
On top of it, you can see under delivery also. Is there any value maintained ?? In fact, before posting these questions, I was also under the impression that whatever tolerance limit that we maintain in customer master should control the system accordingly and that is the only area from where the tolerance limit is being controlled in standard, to the best of my knowledge.
thanks
G. Lakshmipathi
Hello Again,
On top of it, you can see under delivery also
There is no specific field like check under delivery in 0VLP..there is only Check minimum qty with the value A-Note abt the situation.
I believe this Part.dlv./item VBAP-KZTLF= 'C' setting in a sales order line item, override the both under and overdlivery fileds' values.
Reg,
JJ
Tested for a sale order and below are my findings
Finding 1
1) Had changed the warning message to error in OVM1
2) Maintained "C" in KNVV - KZTLF
3) Maintained 10% in KNVV - UNITO
4) Created a sale order for 120 pcs
5) Stock uploaded for 100 pcs
6) Able to do PGI
Finding 2
1) Maintained "C" in KNVV - KZTLF
2) Removed 10% in KNVV - UNITO
3) Created a sale order for 20 pcs
4) Stock uploaded for 10 nos.
5) System prevented me doing PGI
For information, my IMG settings are as follows:-
1) In VOV7, Completion Rule is A and Billing Relevance is A
2) In VTLA at header level, maintained routine 001 for Header Data and at item level, routine 101 is maintained both for Order requirements and Item data with "Pos./neg. quantity" as plus.
Hope this information is suffice to check your settings.
thanks
G. Lakshmipathi
Hello Sir,
Thanks heaps for your reply and efforts. I have checked all of my settings as you said. All are identical with yours.
Besides, i have checked the same experiment in IDES whatever you did , but its not working as you said. It's throwing the same error msg ' Full delivery is required' (VL062)... and i'm not even able to enter into Delivery screen..
Even if we go with your output, kindly check the logic...Sales order qty is 120..and availble stock is 100.
As per the under deliv.tolerance 10%, system sholud allow to do delivery 108 to120 stocks only( 120-10%=108) but not less than 108.
waiting for your reply...
Reg,
JJ
Edited by: Jagsap on Dec 11, 2009 10:11 AM
User | Count |
---|---|
108 | |
12 | |
11 | |
6 | |
5 | |
4 | |
3 | |
3 | |
3 | |
3 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.