on 07-27-2013 3:28 PM
Hi All,
i am getting an error while using SUM(software update manager) Tool in Solman 7.1 in post processing step.
Error :
Unable to execute the SDT request ABAP operation post-execute on hostname SAPSMD instance 00 Post-Uptime execution of the ABAP upgrade request ABAP has failed Error from unit observer Cannot execute unit post-execute, current unit is extract.
Please help me ..
Thanks,
Raj kihsor
Hi All
Thanks for your support....
we restore the usr folder and started it again now it's working ..
Thanks,
Raj ksihor
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Ron,
Only perform the following steps if you were in one of the Preparation Roadmap steps (1-4) when you tried to reset the previous upgrade:
Now the upgrade should no longer stop in phase PREP_INIT/VALCHK_INI.
If this procedure is not successful then please check note 2053877. Since SUM SP10 report RSUPGRES can be executed to reset an upgrade.
Additional information are also provided in the Upgrade Troubleshooting WIKI at http://wiki.scn.sap.com/wiki/x/Ko99Fw.
For more info, follow the note #1790486
Thanks.
Hello Raj,
You are in postprocessing phase and it looks it got completed....no now when you try to start it again it throws this error. Please check the SAPup.log.....What phase does it show.....if you do not find the phases in the postprocessing in the SAPup.log......check if you could find the ABAP****.SAR file in system. Uncompress it and check the SAPup.log there....
Reagrds,
Gaurav
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Gaurav,
thanks for your support.
SAPup.log file:
# WARNING: Cannot delete file 'E:\usr\sap\SM7\SUM\abap\tmp\rfc03372_02352.trc', reason 'Deleting 'E:\usr\sap\SM7\SUM\abap\tmp\rfc03372_02352.trc' failed: The process cannot access the file because it is being used by another process.
' - ignored!
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode server.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
# Got SAP instance 'DVEBMGS00'.
# Got SAP instance 'SCS01'.
# DB-functions initialized for 'MSSQL'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CHKMCOD.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CHKMCOD.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD6.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD6.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD7.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD7.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CREA4_6V.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CREA4_6V.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\mssspexe.js' to 'E:\usr\sap\SM7\SUM\abap\bin\mssspexe.js'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps10.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps10.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps11.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps11.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps9.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps9.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\SELDBS.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\SELDBS.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\TABLOC.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\TABLOC.MSS'.
STARTUP 20130727151105
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727151105
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727151105
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727151109 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727151109
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727153935
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727153935
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727153935
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727153937 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727153937
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727155509
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727155509
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727155509
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727155510 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727155510
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727163140
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727163140
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727163140
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727163140 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727163140
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727191311
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727191311
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727191311
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727191313 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727191313
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727192523
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727192523
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727192523
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727192523 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727192523
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
-> decided to exit in unit -.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727192804
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727192804
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727192804
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727192804 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727192804
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
stull having issue with that
Thanks,
Raj Kishor
Hi Raj,
Please share us the SAPup.log.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Karthik,
SAPup.log file
# WARNING: Cannot delete file 'E:\usr\sap\SM7\SUM\abap\tmp\rfc03372_02352.trc', reason 'Deleting 'E:\usr\sap\SM7\SUM\abap\tmp\rfc03372_02352.trc' failed: The process cannot access the file because it is being used by another process.
' - ignored!
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode server.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
# Got SAP instance 'DVEBMGS00'.
# Got SAP instance 'SCS01'.
# DB-functions initialized for 'MSSQL'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CHKMCOD.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CHKMCOD.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD6.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD6.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD7.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD7.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CREA4_6V.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CREA4_6V.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\mssspexe.js' to 'E:\usr\sap\SM7\SUM\abap\bin\mssspexe.js'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps10.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps10.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps11.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps11.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps9.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps9.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\SELDBS.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\SELDBS.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\TABLOC.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\TABLOC.MSS'.
STARTUP 20130727151105
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727151105
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727151105
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727151109 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727151109
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727153935
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727153935
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727153935
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727153937 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727153937
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727155509
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727155509
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727155509
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727155510 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727155510
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727163140
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727163140
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727163140
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727163140 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727163140
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727191311
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727191311
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727191311
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727191313 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727191313
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727192523
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727192523
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727192523
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727192523 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727192523
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
-> decided to exit in unit -.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727192804
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727192804
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727192804
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727192804 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727192804
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
Hi Karthik,
SAPup.log file
# WARNING: Cannot delete file 'E:\usr\sap\SM7\SUM\abap\tmp\rfc03372_02352.trc', reason 'Deleting 'E:\usr\sap\SM7\SUM\abap\tmp\rfc03372_02352.trc' failed: The process cannot access the file because it is being used by another process.
' - ignored!
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode server.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
# Got SAP instance 'DVEBMGS00'.
# Got SAP instance 'SCS01'.
# DB-functions initialized for 'MSSQL'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CHKMCOD.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CHKMCOD.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD6.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD6.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CPMLISHD7.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CPMLISHD7.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\CREA4_6V.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\CREA4_6V.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\mssspexe.js' to 'E:\usr\sap\SM7\SUM\abap\bin\mssspexe.js'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps10.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps10.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps11.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps11.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\msstemps9.mss' to 'E:\usr\sap\SM7\SUM\abap\bin\msstemps9.mss'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\SELDBS.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\SELDBS.MSS'.
# Copying 'E:\usr\sap\SM7\SUM\abap\control\dbs\MSS\TABLOC.MSS' to 'E:\usr\sap\SM7\SUM\abap\bin\TABLOC.MSS'.
STARTUP 20130727151105
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727151105
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727151105
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727151109 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727151109
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727153935
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727153935
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727153935
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727153937 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727153937
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727155509
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727155509
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727155509
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727155510 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727155510
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727163140
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727163140
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727163140
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727163140 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727163140
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727191311
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727191311
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727191311
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727191313 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727191313
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727192523
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727192523
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727192523
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727192523 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727192523
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
-> decided to exit in unit -.
#
# ************************* SAPup started in PREPARE mode *************************
# This is SAPup release lmt_008 version 52.000 compile time 19:12:01 Jun 25 2013.
# This is UNICODE SAPup!
# Running in graphics mode batch.
# DB-functions initialized for 'MSSQL'.
# GUI reports feature 'dialogue' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'handleerror' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'dialoghelp' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'html' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'console' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'progress' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'unitcontrol' as 'enabled' level 3, user said 'unknown'.
# GUI reports feature 'unitstatus' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'actions' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'remotecontrol' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'synchronization' as 'enabled' level 2, user said 'unknown'.
# GUI reports feature 'mid' as 'enabled' level 4, user said 'unknown'.
# GUI reports feature 'exit' as 'unknown' level 0, user said 'unknown'.
# GUI reports feature 'evaluation' as 'enabled' level 1, user said 'unknown'.
# GUI reports feature 'newhttpsrv' as 'unknown' level 0, user said 'unknown'.
STARTUP 20130727192804
# Executing module 'MOD_SELROADMAP'.
Execution of INITIAL module "Select roadmap" begins at 20130727192804
# Starting phase execution with maxpar = 3, scheduled: '-'
CURRENTPHASE MOD_SELROADMAP/SELECT_ROADMAP
...started at 20130727192804
# Using phase log file 'SELROADMAP.LOG'.
..finished at 20130727192804 with status SUCCEEDED.
# Finished execution of 1/1 phases with rc=0.
# ==========================================================================
Execution of INITIAL module "Select roadmap" ends at 20130727192804
CURRENTPHASE
Current unit is '-', next unit is 'EXTRACT'.
User | Count |
---|---|
76 | |
9 | |
8 | |
7 | |
6 | |
5 | |
5 | |
5 | |
5 | |
5 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.